本书的核心内容是关于半导体器件和有源电路的模拟电子电路基础。两位作者Robert L．Boylestad和Louis Nashelsky都是在大学从事电路分析、电子电路基础等相关学科教学的资深教授，在电子电路学科领域出版了多部优秀教材，受到很高的评价。本书自1972年首次出版至今已经修订至第九版，涵盖了更广泛和新颖的内容，成为流行30多年的优秀经典教材。这本改编版在第九版原版内容的基础上，结合国内高等教育中模拟电子电路课程的特点，进行了部分内容的调整。 内容提要 本书是英文原版教材Electronic Devices and Circuit Theory,Ninth．Edition之英文改编版《模拟电子技术》的翻译版，内容包括半导体器件基础、二极管及其应用电路、晶体管和场效应管放大电路的基本原理及频率响应、功率放大电路、多级放大电路、差分放大电路、电流源等模拟集成电路的单元电路、反馈电路、模拟集成运算放大器、电压比较器和波形变换电路等。本书对原版教材进行了改编，精简了内容，突出了重点，补充了必要知识点，内容更加新颖和系统化，反映了器件和应用的发展趋势，强调了系统工程的概念。 本书与英文版教材配套使用，适合电子、计算机、通信等相关专业电子电路基础课程40学时到68学时的中文或双语教学要求，也可供相关专业工程技术人员的学习和参考。
标签： 模拟电子
上传时间： 2022-03-21
上传用户：
首先下载软件，解压软件，安装在程序中找到SEGGER,选里面的J-FLASH，进入界面，刚开始的那个界面可以忽略，不用建project也可以；单击菜单栏的“Options---Project settings”打开设置，进行jlink配置;正在General选项，选择“USB”，一般都是默认配置，确认一下即可;然后在CPU选项，选择芯片型号，先选择“Device”才能选择芯片型号，芯片型号，要根据你使用的芯片进行选择;在Target interface选项 里面选择SWD模式;首先Target里面选“Connection”连接目标芯片，然后 Target--Auto进行程序烧写;首先Target里面选择“Connection”连接目标芯片，然后 Target--Auto进行程序烧写.SEGGER J-Links are the most widely used line of debug probes available today. They've proven their value for more than 10 years in embedded development. This popularity stems from the unparalleled performance, extensive feature set, large number of supported CPUs, and compatibility with all popular development environments.
标签： JLINK
上传时间： 2022-03-22
上传用户：
本设计介绍了一种基于STM32单片机控制的智能水杯,可利用插口式电源或无线充电底座为加热器提供能量,并在达到某种饮品所需温度时进行保温。水杯内置充电电池,可选用USB接口或无线充电。在水杯内部设置无线模块,用户利用手机App与水杯进行匹配进行加热操作,加热完后水杯会通过手机App和液晶显示屏实时反馈液体温度,通过指示灯显示电量情况等,给用户进行提醒。该智能水杯设计创新,实用价值较高。This paper introduces an intelligent water cup based by STM32 microcontroller,it can provide energy for the heater by socket type power supply or wireless charging base,and hold temperature needed for some kind of drink.Builtedin rechargeable battery,water cup can use USB or wireless charging.The wireless module is set up inside it,and customers can use mobile App to match and heat.After heating,water cup feeds back liquid temperature through the mobile App,and then displays on LCD,reminds users through the indicator light.The intelligent water cup is designed innovatively and has high practical value.
上传时间： 2022-03-28
上传用户：
针对目前MSP430单片机实验装置较少、实验内容少,而且无MSP430高端产品的实验装置,研制了基于MSP430F5529单片机的综合实验装置,主要包括MSP430 Launch Pad和母板两部分。较传统的单片机实验装置增加了模拟电路的设置,设计的实验能够利用单片机的所有外设,可进行模块基础实验和综合实验两大类实验,非常适合自动化和电气信息类大学生学习使用。Concerning with the lack of experimental equipment and content based on MSP430,and especially,the experimental equipment of MSP430 senior products,an experimental equipment based on MSP430F5529 microcontroller is developed. It mainly consists of two parts： MSP430 Launch Pad and main board. Compared with traditional microcontroller experiment equipment,a few analog circuits were added. The experiment we set up takes advantage of all microcontroller peripherals. Students can do two kinds of experiments： module experiment and complex experiment.Therefore it fits university students in automation and electrical major very well.
标签： msp430f5529 单片机
上传时间： 2022-04-13
上传用户：
S32K1xx Series Reference Manual 用户手册--2029页 Supports S32K116, S32K118, S32K142, S32K144, S32K146, and S32K148S32K是一款符合AEC-Q100规范、基于32位ARM Cortex-M4F和Cortex-M0+内核的MCU，适用于通用汽车和高可靠性工业应用。The S32K1xx product series further extends the highly scalable portfolio of Arm® Cortex®-M0+/M4F MCUs in the automotive industry. It builds on the legacy of the KEA series, while introducing higher memory options alongside a richer peripheral set extending capability into a variety of automotive applications. With a 2.70–5.5 V supply and focus on automotive environment robustness, the S32K product series devices are well suited to a wide range of applications in electrically harsh environments, and are optimized for cost-sensitive applications offering low pin-count options. The S32K product series offers a broad range of memory, peripherals, and package options. It shares common peripherals and pin counts, allowing developers to migrate easily within an MCU family or among the MCU families to take advantage of more memory or feature integration. This scalability allows developers to use the S32K product series as the standard for their end product platforms, maximizing hardware and software reuse and reducing time to market
标签： S32K116 S32K118 S32K142 S32K144
上传时间： 2022-04-16
上传用户：jason_vip1
英文书籍《天线理论分析与设计》第3版，高清英文原版，非扫描版。
标签： 天线
上传时间： 2022-04-21
上传用户：
为适应双向DC/DC功率变换的电流采样需求,一种高精度高边电流采样电路被提出。其基本思想是在功率电路的高边串入采样电阻,借助电流镜原理并引入偏置电流电路,将双向电流均转换为正向电压输出。通过理论分析与仿真结合的方法对电流镜采样原理及4种不同的偏置电流电路方案进行对比,最后通过实验数据验证了高精度高边电流采样电路的有效性。实验数据表明,该采样电路可在-25~75℃的温度工作范围内,针对-10~＋10 A范围内的电流采样实现优于5%的采样精度。Current sensing plays an important role in controlling,monitoring or protection functions of power systems.To meet the current sensing requirement of bidirectional DC/DC converters,a high-accuracy bidirectional current sensing circuit is proposed.The proposed current sensing circuit inserts a resistor in the path of the current to be sensed,while the current mirror and biased current circuit are introduced.Therefore,the bidirectional current can be expressed by positive voltage.By theoretical analysis and simulation,the sampling theory is analyzed and four biased current circuits are compared.At last,experimental results verified the proposed method.It is demonstrated that the proposed current sensing circuit can achi...
上传时间： 2022-04-22
上传用户：
为解决移相全桥电路驱动及相角控制问题,设计了一种数字控制的移相全桥驱动电路.以TPL521为光耦隔离、IR2110为栅极驱动芯片.由DSP产生PWM信号,经过光耦隔离和逻辑电路后送至IR2110进行相角控制.文章对IR2110驱动电路原理进行分析及参数进行设计,对TMS320F28335进行设置并给出部分代码.实验结果表明：通过TMS320F28335可产生的不同相角的PWM波形,满足了移相全桥对不同相角控制的要求.In order to solve the problem of phase-shifted full-bridge circuit driving and phase angle control,a digitally controlled phaseshifted full-bridge driving circuit was designed. TPL521 optocoupler isolation,IR2110 gate driver chip. PWM signals are generated by the DSP and sent to the IR2110 for phase angle control after optocoupler isolation and logic circuits. This text carries on the analysis to the principle of IR2110 drive circuit and parameter design,set up and give out some code to TMS320F28335. The experimental results show that the PWM waveforms with different phase angles generated by TMS320F28335 can meet the requirements of phase-shifted full-bridge control for different phase angles.
上传时间： 2022-05-03
上传用户：zhanglei193
Algebra, Topology, Differential Calculus, and Optimization Theory For Computer Science and Machine Learning一本数学大全书，由Jean Gallier and Jocelyn Quaintance合著。
上传时间： 2022-05-05
上传用户：默默
以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN communication interface or RS232 serial communication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...
上传时间： 2022-05-07
上传用户：
