针对使用硬件描述语言进行设计存在的问题，提出一种基于FPGA并采用DSP Builder作为设计工具的数字信号处理器设计方法。并按照Matlab/Simulink/DSP Builder/QuartusⅡ设计流程，设计了一个12阶FIR 低通数字滤波器，通过Quartus 时序仿真及嵌入式逻辑分析仪SignalTapⅡ硬件测试对设计进行了验证。结果表明，所设计的FIR 滤波器功能正确，性能良好。 Abstract: Aiming at the problems in designing DSP using HDL，a method of designing DSP based on FPGA which using DSP Builder as designed tool is pointed out.A 12-order low-pass FIR digital filter was designed according to the process of Matlab/Simulink/DSP Builder/QuartusⅡ, and the design was verified by the timing simulation based on QuartusⅡand practical test based on SignalTapⅡ. The result shows the designed filter is correct in function and good in performance.
上传时间： 2013-11-17
上传用户：lo25643
在综合分析谐波励磁无刷同步发电机励磁控制系统的基础上,对其励磁控制策略进行了研究,开发了一套基于DSP( TMS320F2812) 控制的新型柴油发电机励磁控制系统,该系统采用参数自适应模糊PID 控制励磁,选用交流采样方式实时检测各信号的瞬时特性,系统仿真结果以及在1 台25 kW 工频柴油发电机上的试验结果证明了该控制器具有较好的电压调节特性,系统稳态和暂态性能完全满足发电机对励磁系统的要求。关键词:励磁调节;模糊PID 控制;数字信号处理器;交流采样 Abstract :According to the general analysis of the excitation cont rol system of the harmonious wave excitation brushless synchronous generator and it s characteristics ,a new type of diesel generator excitation cont rol system based on DSP( TMS320F2812) was designed. An adaptive fuzzy PID cont rol of excitation is used in this system. To detect the t ransient characteristics of the signals in a timely manner ,AC sampling was applied.The system simulation result s and the testing result s f rom a 25 kW diesel generator (50 Hz) can prove that the voltage regulation characteristics of the excitation cont rol system are very well ,and both the steadyOstate performance and the t ransient performance of the generator are also good.Key words :excitation cont rol ;fuzzy PID cont rol ;digital signal processor (DSP) ;AC sampling
上传时间： 2013-10-29
上传用户：fxf126@126.com
设计一种应用于某全地形ATV车载武器装置中的中控系统，该系统设计是以TMS320F2812型DSP为核心，采用模块化设计思想，对其硬件部分进行系统设计，能够完成对武器装置高低、回转方向的运动控制，实现静止或行进状态中对目标物的测距，自动瞄准以及按既定发射模式发射弹丸和各项安全性能检测等功能。通过编制相应的软件，对其进行系统调试，验证了该设计运行稳定。 Abstract: A central control system applied to an ATV vehicle weapons is designed. The system design is based on TMS320F2812 DSP as the core， uses modular design for its hardware parts. The central control system can complete the motion control of the level of weapons and equipment， rotation direction， to achieve a state of static or moving objects on the target ranging， auto-targeting and according to the established target and the projectile and the launch of the security performance testing and other functions. Through the development of appropriate software and to carry out system testing to verify the stability of this design and operation.
上传时间： 2013-11-02
上传用户：jshailingzzh
针对运行中火车测速运用多普勒效应采用DSP 设计雷达测速系统并阐述了其基本设计思想与工作原理给出系统硬件软件设计结构和原理图改善了原有光电测速精度提高了系统工作稳定性和可靠性经实验证明DSP 采集板工作稳定测速效果好关键词DSP; 雷达测速; 多普勒效应 On Board DSP-Based Radar Speed Measurement System TANG Wei, SUN Zhi-fang, CHEN Quan (Dept.of computer Science,Yangtze University,Jingzhou 434023,China)Abstract: This paper presents a DSP-based train speed measurement by using Doppler radar. The structure of the system is introduced.The hardware and software are also discussed.Key words: DSP; rader speed measurement; doppler principle
上传时间： 2013-10-27
上传用户：003030
针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-10-24
上传用户：bvdragon
针对嵌入式机器视觉系统向独立化、智能化发展的要求，介绍了一种嵌入式视觉系统--智能相机。基于对智能相机体系结构、组成模块和图像采集、传输和处理技术的分析，对国内外的几款智能相机进行比较。综合技术发展现状，提出基于FPGA+DSP模式的硬件平台，并提出智能相机的发展方向。分析结果表明，该系统设计可以实现脱离PC运行，完成图像获取与分析，并作出相应输出。 Abstract: This paper introduced an embedded vision system-intelligent camera ，which was for embedded machine vision systems to an independent and intelligent development requirements. Intelligent camera architecture， component modules and image acquisition， transmission and processing technology were analyzed. After comparing integrated technology development of several intelligent cameras at home and abroad， the paper proposed the hardware platform based on FPGA+DSP models and made clear direction of development of intelligent cameras. On the analysis of the design， the results indicate that the system can run from the PC independently to complete the image acquisition and analysis and give a corresponding output.
上传时间： 2013-11-14
上传用户：无聊来刷下
The Kannel Open Source WAP and SMS gateway works as both an SMS gateway, for implementing keyword based services via GSM text messages, and a WAP gateway, via UDP. The SMS part is fairly mature, the WAP part is early in its development. In this release, the GET request for WML pages and WMLScript files via HTTP works, including compilation for WML and WMLScript to binary forms. Only the data call bearer (UDP) is supported, not SMS.
标签： gateway implementing SMS keyword
上传时间： 2014-01-11
上传用户：2525775
TLV1544与TMS320VC5402通过串行口连接，此时，A／D转换芯片作为从设备，DSP提供帧同步和输入／输出时钟信号。TLV1544与DSP之间数据交换的时序图如图3所示。 开始时， 为高电平（芯片处于非激活状态），DATA IN和I/OCLK无效，DATAOUT处于高阻状态。当串行接口使CS变低（激活），芯片开始工作，I／OCLK和DATAIN能使DATA OUT不再处于高阻状态。DSP通过I／OCLK引脚提供输入／输出时钟8序列，当由DSP提供的帧同步脉冲到来后，芯片从DATA IN接收4 b通道选择地址，同时从DATAOUT送出的前一次转换的结果，由DSP串行接收。I／OCLK接收DSP送出的输入序列长度为10～16个时钟周期。前4个有效时钟周期，将从DATAIN输入的4 b输入数据装载到输入数据寄存器，选择所需的模拟通道。接下来的6个时钟周期提供模拟输入采样的控制时间。模拟输入的采样在前10个I／O时钟序列后停止。第10个时钟沿（确切的I／O时钟边缘，即上升沿或下降沿，取决于操作的模式选择）将EOC变低，转换开始。
上传时间： 2014-12-05
上传用户：yepeng139
Atheros无线芯片AR-6000系列wince 6驱动源代码(这东西我也没用过别问我,我是搜别的wince资源搜到的) AR6K SDIO support. Requires firmware 1.1 on SD13 cards. readme: Atheros Communications AR6001 WLAN Driver for SDIO installation Read Me March 26,2007 (based on k14 fw1.1) Windows CE Embedded CE 6.0 driver installation. 1. Unzip the installation file onto your system (called installation directory below) 2. Create an OS design or open an existing OS design in Platform Builder 6.0. a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items). b. Run image size should be set to allow greater than 32MB. 3. a. From the Project menu select Add Existing Subproject... b. select AR6K_DRV.pbxml c. select open This should create a subproject within your OS Design project for the AR6K_DRV driver. 4. Build the solution. 转自Tony嵌入式,原文地址：http://www.cevx.com/bbs/dispbbs.asp?boardID=4&ID=11762&page=1
标签： wince Requires firmware Atheros
上传时间： 2014-11-11
上传用户：bibirnovis
西安电子科技大学 硕士学位论文 《基于DSP的无刷直流电机高性能调速系统的研究》 作者姓名：张焱 Research on BLDC High Performance Speed-adjusting System Based on DSP
标签： Speed-adjusti Performance Research BLDC
上传时间： 2016-08-18
上传用户：日光微澜
