BeiJing54 coordinate system to Space Angle coordinate system
标签： coordinate system BeiJing Angle
上传时间： 2016-04-29
上传用户：磊子226
polar Angle average for beamforming
标签： beamforming average polar Angle
上传时间： 2013-11-29
上传用户：maizezhen
A function to find necessary Angle
标签： necessary function Angle find
上传时间： 2014-11-23
上传用户：
#define PI 3.1415926 double Angle=(double)theta/10.0*PI/180.0 double Anglecos=cos(Angle) double Anglesin=sin(Angle)
标签： double Angle 3.1415926 Anglecos
上传时间： 2014-01-08
上传用户：181992417
Angle measurement is frequently required in both automotive and industrial applications. Contactl
上传时间： 2013-05-18
上传用户：cuiqiang
生活中许多目标的高度和水平距离需要进行测量。目前主要的测量方法，仍以传统的皮尺丈量为主，测量效率不高，有时还很不方便，没有技术成熟的数字式测高测距产品。以基本的数学方法为理论依据，利用遥控小车做为载体，采用角度传感器测量角度、霍尔传感器测量水平距离等，通过单片机LM3S615进行数据计算，实现了对待测目标物体的高度、水平距离等数据的快速、精确和数字式的测量，高度测量精度可达99.06%，水平测量精度则可达98.06%。 Abstract: In our lives， the height and horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based measuring methods， and the measuring efficiency is low and inconvenient so some kinds of digital and portable measuring methods or instruments are needed. Based on the basic math theory， this paper designed and manufactured a portable， digital and remote controlled measuring mobile small vehicle， which assembled with Angle measuring sensor for Angle measurement and Hall sensor for horizontal distance measuring. MCU LM3S615 calculated the height and horizontal distance data gotten from these sensors. The measuring process is simple， the measuring results are more accurate and the measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.
上传时间： 2013-10-30
上传用户：jackandlee
为提高太阳能的利用率，以ATmega8单片机为控制核心，设计了一套光电跟踪与视日运动轨迹跟踪互补控制的双轴太阳跟踪器。该跟踪器在晴天时，利用光敏电阻采集光强判断太阳位置,控制步进电机实现光电跟踪；在阴天时，采集时钟器件PCF8583的时间信息,计算当前太阳位置来实现视日运动轨迹跟踪。实验表明：该太阳跟踪器能在不同天气状况下对太阳进行较准确地跟踪，能量接收效率提高了30%，达到充分利用太阳能的目的。 Abstract: To improve the utilization rate of solar energy，a kind of solar tracking controller which effectively combined the sun Angle tracking and photo electric tracking based on ATmega8is designed.In the sunny days，the solar tracking con-troller determines the sun's position by using photosensitive resistances to collect light intensity and control stepper motors to achieve photo electric tracking，n cloudy days，it collects clock chip PCF8583time information to calculate the current position of the sun and achieve the sun Angle tracking.Experimental results show the solar tracking controller accurately tracks the sun in different weather conditions，improves received energy efficiency by30%and reaches the purpose of full use of solar energy.
上传时间： 2013-10-15
上传用户：urgdil
针对材料试验机等设备中要求测量或控制材料拉伸或压缩的位移，一般采用光电轴角编码器检测位置信号，输出正交编码脉冲信号。若采用其他方法检测位置信号，必然导致电路设计复杂，可靠性降低。因此，提出一种基于LS7266R1的电子式万能材料试验机设计方案。给出了试验机中的控制器工作原理，LS7266R1与单片机的接口硬件设计，以及主程序软件流程图。巧妙地把力量传感器，位移传感器等机械运动状态的压力或拉力以及位置坐标，变成了电压信号和电脉冲数字信号，供A/D测量和LS7266R1计数，从而实现了独立完成材料试验控制或通过PC机串口命令完成材料试验控制。 Abstract: Aiming at the requirement that the displacement of the tension and compression always be tested and controlled in the equipement such as material testing machine. The position signal was tested by photoelectric axial Angle coder. Therefore， the paper proposes the design of electronic universal testing machine design based on LS7266R1. If the position signal detected by other methods， will inevitably lead to the circuit design complexity， reliability decreased. The work theory of the controller， the hardware interface design between LS7266R1 and single chip， and the flow chart of main program， are presented in this paper. The signal of the compression or tension power and displacement at working， which tested by power sensor and displacement sensor especially， is changed into electric voltage and electric pulse numerical signals. And these signals can be tested by A/D and counted by LS7266R1. Finally the test of the material properties can be controlled by itself， or controlled by the COM command of PC.
上传时间： 2013-11-02
上传用户：yl1140vista
介绍了一种基于MSP430系列单片机和ADXL203加速度传感器的数字式倾角仪，它不仅可以实现水平度检测，而且可以测量00～3600范围内的任意倾角，分辨率可达O．1。。此外，由于该倾角仪输出为数字结果，因此它也可以与其他的数字设备结合起来，组合成一个功能更加强大的仪器。该数字倾角仪可广泛应用于建筑、机械、道路、桥梁、石油、煤矿和地质勘探等各种需要测量重力参考系下倾角的场合。关键词：MSP430F133单片机；力敏传感器；ADXL203加速度计；角度测量 Abstract：This paper presents a new style digital inclinometer which is developed on the basis of the MSP430F133 MCU and the ADXL203 dual axis aeeelerometer．This inclinometer not only can test levelness，but also can measure any Angle between 0。and 360。with an accuracy of 0．1 O．In addition，its output is a digital result，which makes it possible to integrate itself with other digital devices to form a more functional unit．This inclinometer can be widely used in any construction site，oil field，coal-mine or geologic survey and SO on where it will provide the working people with convenience to measure any Angles．Key words：MSP430F133 MCU；force sensor；ADXL203 accelerometer；Angle measurement
上传时间： 2013-11-14
上传用户：lizhizheng88
ADXL345的详细介绍资料 本模块使用说明书。 本压缩文件能够利用角度传感器对x，y，z三方的加速度值，角度值进行测量，并集成了1602对其进行显示。 为了便于使用，我们分别将模块单独化，如果您有使用的意向，可以单独摘出 Angle.c 引入到您自己新建的工程中。 关于Angle.c文件的内部函数使用说明。 首先为了便于使用和方便引用我们对内部函数进行了高度集成化，您在引入Angle.c后直接在您的主程序中调用 dis_data();函数，可完成ADXL345芯片的测量数据， 测量数据说明： char as_Xjiasu[6],as_Yjiasu[6],as_Zjiasu[6]; //定义3轴静态重力加速度值的ASCII码值 unsigned char as_Xangel[4],as_Yangel[4],as_Zangel[4]; //定义3轴角度值的ASCII码值 as_Xjiasu[x]数组里边我们为了您的使用直接将 加速度值转换成了 能够直接显示到 1602上的ASCII码值，同理as_Xangel 真实数据存放说明。 float jiasu_xyz[3]; angel_xyz[3]; //存放X,Y,Z 轴的静态重力加速度，角度值 存放了 加速度和角度的真实值（未经转换成ASCII码的数据）--本数据可以用于其他用途，直接参与MCU内部运算等。
上传时间： 2013-11-17
上传用户：wpwpwlxwlx
