本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
抢答器是一种智力竞赛常用的器件,抢答器的设计方法千差万别,文章利用常用的数字电子器件,设计了八路抢答器电路的设计、仿真及实现的全过程,提出两种可行的设计方案:方案1采用74ls373实现电路锁存,74ls148实现电路编码,74ls74及数码管实现电路显示;方案二采用CD4511BCN和LMC555CM集成电路及数码管实现抢答器的控制和显示。本文设计用的器件简单,容易理解,适用于初学电子技术的人员。Answer scrambler is a common device in intelligence competition, and its design methods vary greatly. This paper designs the whole process of design, simulation and Realization of the circuit of eight-way answer scrambler by using common digital electronic devices, and puts forward two feasible design schemes: scheme 1 uses 74 ls373 to realize circuit latching, 74 ls148 to realize circuit coding,74 ls74 and digital tube to realize circuit. The second scheme uses CD4511 BCN, LMC555 CM integrated circuit and digital tube to control and display the answerer. The device designed in this paper is simple and easy to understand, and it is suitable for the beginners of electronic technology.
标签： 抢答器
上传时间： 2022-04-05
上传用户：
针对目前MSP430单片机实验装置较少、实验内容少,而且无MSP430高端产品的实验装置,研制了基于MSP430F5529单片机的综合实验装置,主要包括MSP430 Launch Pad和母板两部分。较传统的单片机实验装置增加了模拟电路的设置,设计的实验能够利用单片机的所有外设,可进行模块基础实验和综合实验两大类实验,非常适合自动化和电气信息类大学生学习使用。Concerning with the lack of experimental equipment and content based on MSP430,and especially,the experimental equipment of MSP430 senior products,an experimental equipment based on MSP430F5529 microcontroller is developed. It mainly consists of two parts： MSP430 Launch Pad and main board. Compared with traditional microcontroller experiment equipment,a few analog circuits were added. The experiment we set up takes advantage of all microcontroller peripherals. Students can do two kinds of experiments： module experiment and complex experiment.Therefore it fits university students in automation and electrical major very well.
标签： msp430f5529 单片机
上传时间： 2022-04-13
上传用户：
为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。In order to improve the reader UHF RFID system still has a higher ability to identify,in the case of low signal-to-noise ratio.The UHF RFID systems must comply with EPC Class 1 generation 2 standard.In this paper,the design of the circuit system based on Xilinx＇s XC6SLX16-2CSG324 FPGA chip,and presents UHF RFID RF front-end circuit with software radio based on FPGA system.Digital baseband modem and IF filter circuit is designed and implemented in the FPGA system,and focused on designing the structure of the RF front-end circuit,AD/DA conversion circuits,and digital filter.Experimental results show that the UHF RFID reader de...
标签： 915mhz 超高频 rfid 阅读 射频 前端 电路 设计
上传时间： 2022-04-17
上传用户：shjgzh
Digital Signal Processing in Python基于python的数字信号处理原版，对于dsp算法的快速原型验证非常有帮助。
上传时间： 2022-04-28
上传用户：
基于DSP28035的高速永磁无刷直流电机驱动系统，包括论文和软硬设计资料。摘要参赛作品为基于DSP28035的高速永磁无刷直流电机驱动系统。该系统以一台额定转速60 krpm的高速永磁无刷直流电机、交错并联的Buck电路以及全桥电路为硬件平台，以DSP28035为控制核心，实现了调压调速功能和基于坐标变换的无位置传感器新技术。为实现该系统要求，本作品充分利用了DSP28035的资源例如：CLA模块，模拟比较器、HPWM模块以及AD转换模块等。AbstractThis work is the drive system for a high speed permanent magnet burshless dc motor based on DSP28035. The hardware platform consists of a BLDC motor(rated speed is 60000rpm), a Buck circuit and an inverter. Under the control of DSP28035, this system can achieve the goal of adjusting the motor’s speed with voltage and the function of sensorless control based on the coordinate transformation. By making full use of resources of the core, such as CLA, analog comparator, HPWM and AD converters, the whole system can meet the requirements.1 引言高速永磁无刷直流电机驱动系统由于基波频率较高（一般在1kHZ以上），利用逆变桥斩波进行调速的控制方式通常会受到开关管开关频率的限制，因此该系统多采用三相全桥前级加Buck电路进承担调压调速的功能，而三相全桥主要承担逻辑换相的功能。然而，传统Buck电路所需电感的体积较大，增加了系统的体积，降低了系统的功率密度。
上传时间： 2022-05-08
上传用户：bluedrops
数字频率计是电工电子中常用的测量仪器,数字频率计通过用输入待测信号对一特定长度的信号进行计数,从而得出频率并通过数码管直观的显示出来。本文提出了一种与输入同步的数字频率计的设计,提高了频率计的精度,设计采用Multisim软件进行设计和仿真的过程,介绍了其工作原理,硬件电路设计和仿真的过程。设计采用了Multisim软件进行设计和仿真,设计结果得到的验证。Digital frequency counter is used to measure the frequency of a signal.It is common to use a multivibrator to generate a standard 1 second time base signal and count input signal gated by this signal.However,the asynchronous of this time base signal with input signal will bring errors.In this paper,a high precision frequency counter which use synchronized time base signal generator is proposed.This frequency counter is designed and simulated by Multisim tools and result is verified.
标签： multisim
上传时间： 2022-05-08
上传用户：
《数字集成电路:电路、系统与设计(第二版) 》，电子工业出版社出版，外文书名: Digital Integrated Circuits:A Design Perspective,Second Edition，作者：简·M.拉贝艾 (Jan M.Rahaey) (作者), Anantha Chandrakasan (作者), Borivoje Nikolic (作者), 周润德 (译者), 等 (译者)。本书由美国加州大学伯克利分校Jan M. Rabaey教授等人所著。全书共12章，分为三部分： 基本单元、电路设计和系统设计。本书在对MOS器件和连线的特性做了简要的介绍之后，深入分析了数字设计的核心——反相器，并逐步将这些知识延伸到组合逻辑电路、时序逻辑电路、控制器、运算电路以及存储器这些复杂数字电路与系统的设计中。为了反映数字集成电路设计进入深亚微米领域后正在发生的深刻变化，本书以CMOS工艺的实际电路为例，讨论了深亚微米器件效应、电路最优化、互连线建模和优化、信号完整性、时序分析、时钟分配、高性能和低功耗设计、设计验证、芯片测试和可测性设计等主题，着重探讨了深亚微米数字集成电路设计所面临的挑战和启示。
上传时间： 2022-05-13
上传用户：zhaiyawei
Allen的Think系列，讲述数字信号处理器（DSP）基本概念，用Python语言描述这些概念。可实际运行代码，更深的理解DSP。
上传时间： 2022-05-14
上传用户：
说明： 基于51单片机的数字直流电压表相关材料，内容有原理图，仿真文件，论文材料，程序源码等。(The related materials of digital DC voltmeter based on 51 single chip computer include schematic simulation files, paper materials, program source code, etc.)
上传时间： 2022-05-16
上传用户：fliang
