Since the advent of optical communications, a great technological effort has been devoted to the exploitation of the huge bandwidth of optical fibers. Start- ing from a few Mb/s single channel systems, a fast and constant technological development has led to the Actual 10 Gb/s per channel dense wavelength di- vision multiplexing (DWDM) systems, with dozens of channels on a single fiber. Transmitters and receivers are now ready for 40 Gb/s, whereas hundreds of channels can be simultaneously amplified by optical amplifiers.
标签： Communication Techniques Optical Theory and
上传时间： 2020-05-31
上传用户：shancjb
The following sections profile many of the vendors in the NFV market. The individual profiles were created through a collaborative effort between SDNCentral’s Research Team and the Vendor’s product experts. SDNCentral worked under the assumption the information provided by the vendors was fActual, auditing the submissions only to remove unverifiable claims and hyperbole. Extended profiles can be viewed online. While every attempt has been made to validate the capabilities listed in the profiles, SDNCentral advises end users to verify the veracity of each claim for themselves in their Actual deployment environments. SDNCentral cannot be held liable for unexpected operations, damages or incorrect operation due to any inaccuracies listed here. SDNCentral welcomes feedback and additional information from end users based on their real-world experiences with the products and technologies listed. The SDNCentral research team can be reached at
标签： SDxCentral-Mega-NFV-Report
上传时间： 2020-05-31
上传用户：shancjb
Recent years have seen a rapid development of neural network control tech- niques and their successful applications. Numerous simulation studies and Actual industrial implementations show that artificial neural network is a good candidate for function approximation and control system design in solving the control problems of complex nonlinear systems in the presence of different kinds of uncertainties. Many control approaches/methods, reporting inventions and control applications within the fields of adaptive control, neural control and fuzzy systems, have been published in various books, journals and conference proceedings.
标签： Stable_adaptive_neural_network_co ntrol
上传时间： 2020-06-09
上传用户：shancjb
Wherever possible the overall technique used for this series will be "definition by example" withgeneric formulae included for use in other applications. To make stability analysis easy we will usemore than one tool from our toolbox with data sheet information, tricks, rules-of-thumb, SPICESimulation, and real-world testing all accelerating our design of stable operational amplifier (op amp)circuits. These tools are specifically targeted at voltage feedback op amps with unity-gain bandwidths<20 MHz, although many of the techniques are applicable to any voltage feedback op amp. 20 MHz ischosen because as we increase to higher bandwidth circuits there are other major factors in closing theloop: such as parasitic capacitances on PCBs, parasitic inductances in capacitors, parasitic inductancesand capacitances in resistors, etc. Most of the rules-of-thumb and techniques were developed not justfrom theory but from the Actual building of real-world circuits with op amps <20 MHz.
标签： 运算放大器
上传时间： 2021-11-01
上传用户：hbsun
针对嵌入式产品程序更新问题,提出了一种基于IAP技术的STM32单片机在线固件升级方案,设计了STM32单片机最小系统硬件电路和USB转串口通信电路,并给出了Bootloader程序、APP程序、PC上机程序的实现流程.实验结果表明,该方案具有简单实用、稳定性高、维护成本低和设备使用效率高的特点,适用于嵌入式产品升级.For the problem of updating embedded products program,an online firmware upgrade scheme of STM32 single chip microcomputer based on IAP technology is proposed.This scheme not only elaborates the principle of IAP technology in detail but also provides the design of the minimum system hardware circuit of STM32 MCU,the design of USB for serial communication circuit,and the implementation flow of Bootloader program,APP program and PC program.The experiment results show that the scheme is simple,practical and highly stable.In addition,it can be used to Actual embedded product upgrading,significantly reducing maintenance costs and improving the efficiency of equipment.
上传时间： 2022-03-25
上传用户：GGMD
设计了农业温湿度智能控制系统,该系统采用DHT11温湿度传感器作为温湿度采集模块,单片机选用AT89C52代替并调用Virtual terminal模拟串口通信,LCD1604液晶显示器实时显示温湿度,实现了温湿度的测量、显示,可自动控制加热、降温、加湿、通风,实现温湿度控制以及超限报警处理,并利用Proteus与Keil进行实际电路的仿真。试验表明,该系统实现了可靠的温湿度监控。We described the design of an intelligent control system of agriculture temperature and humidity.The system uses DHT11 temperature and humidity sensor as the temperature and humidity acquisition module.The SCM adopts AT89C52 to replace and call the virtual terminal for simulating serial communication.LCD1604 displays temperature and humidity in real time,which implements the measurement and display of temperature and humidity.The system is able to automatically control heating,cooling,humidification and ventilation,to achieve temperature and humidity control and over-limit alarm processing.The system also uses Proteus and Keil for Actual circuit simulation.The experiment shows that the system is capable of reliable temperature and humidity monitoring.
上传时间： 2022-03-26
上传用户：aben
随着光伏发电系统快速发展,以及电动汽车充电桩的普及,传统的剩余电流保护器无法满足实际需求。介绍了一款B型剩余电流保护器,采用磁调制剩余电流互感器和零序电流互感器采集剩余电流。根据GB/T 22794—2017标准要求,可识别1 kHz及以下的正弦交流、带和不带直流分量的脉动直流、平滑直流等剩余电流信号。经信号调理电路将电压信号送到单片机进行采集和判断。通过试验测试,该样机在测试精度和速度上均符合国家标准的相关要求。The rapid development of photovoltaic power generation systems and the popularity of electric vehicle charging piles make the traditional residual current protective devices unable to meet the Actual demand.This paper proposed a type B residual current protective device,which uses the magnetically modulated residual current transformer and the zero sequence current transformer to acquire the residual current.According to the requirements of GB/T 22794—2017,the type B residual current protective device can detect sinusoidal AC residual current of 1kHz and below 1kHz,pulsating DC residual current with and without DC component,smooth DC residual current and so on.The signal processing circuit sends the voltage signal to the MCU for acquisition and judgment.Through experimental tests,the device meets the relevant requirements of national standards in terms of test accuracy and speed.
标签： 电流保护器
上传时间： 2022-03-26
上传用户：zinuoyu
在半导体制冷技术的工作性能及其优缺点研究的基础上,设计了以单片机为核心控制元件,以TEC1-12706为执行元件的半导体制冷温度控制系统。采用高精度分段式PID控制算法配合PWM输出控制的方法实现温度控制;选择数字传感器DS18B20为温度检测元件,还包含1602液晶显示模块、按键调整输入模块和H桥驱动模块等。实际测试表明,该系统结构简单易行,操作方便,工作性能优良,同时针对该系统专门设计的温控算法,使半导体制冷器能更好地适应不同工况而充分发挥其制冷制热工作特性。Based on the study of the performance and advantages and disadvantages of thermoelectric cooler(TEC)technology,a thermoelectric cooling temperature control system with single-chip microcomputer as the core control element and TEC1-12706 as the executive element was designed. High precision piecewise PID control algorithm combined with PWM output control method is adopted to realize temperature control. The digital sensor DS18B20 is selected as the temperature detection element. It also includes 1602 LCD module,key adjustment input module and H bridge drive module. The Actual test shows that the system has simple structure,convenient operation and excellent performance. Meanwhile,the temperature control algorithm specially designed for the system can make the semiconductor cooler better adapt to different working conditions and give full play to its refrigeration and heating characteristics.
上传时间： 2022-03-26
上传用户：pagedown
ABB机器人编程手册.pdfAliasIO is used to define a signal of any type with an alias name or to use signals in builtin task modules. Signals with alias names can be used for predefined generic programs, without any modification of the program before running in different robot installations. The instruction AliasIO must be run before any use of the Actual signal. See Basic examples on page 21 for loaded modules, and More examples on page 22 for installed modules.
上传时间： 2022-03-27
上传用户：kingwide
应用无迹卡尔曼滤波算法（UKF）进行锂电池的SOC估计,采用Thevenin二阶RC等效电路模型,对HPPC电池脉冲充放电实验数据进行Matlab处理,得到较为准确的模型.通过在Matlab中编写算法程序,对不同工况的估计值与实际值进行误差估算及对比分析,通过此算法进行SOC估计,得到该算法可有效降低系统误差并纠正SOC的初值偏差.The non trace Calman filter （UKF） is applied to the SOC estimation of lithium battery. The Thevenin two order RC equivalent circuit model is used to process the HPPC battery pulse charge discharge experimental data by Matlab processing, and a more accurate model is obtained. By writing algorithm program in Matlab, the error estimation and comparison analysis of the estimated value and Actual value of different states are carried out, and the SOC estimation is carried out by this algorithm. The algorithm can effectively reduce the system error and correct the initial value deviation of the SOC.
标签： 卡尔曼滤波
上传时间： 2022-05-02
上传用户：默默
