虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

Abstract-In

  • 基于C8051F320的心电监护系统设计

    介绍一种基于C8051单片机的动态心电监护系统。该系统由两部分组成:以C8051F320单片机为核心的数据采集装置和以PC机为平台的分析处理系统。硬件电路功耗低,由单片机自带的USB接口将数据传送给PC机。软件平台采用LabVIEW可视化虚拟仪器系统开发平台,将传统仪器的功能模块集成到计算机中,用户可通过修改虚拟仪器的程序改变其功能。采用USB接口实时传输心电数据,并将数据采集模块设计为计算机外设,使该系统高速快捷、小巧便携。 Abstract:  In this design,a low-cost ECG electrocardiogram monitoring system is introduced,which consists of two parts:data acquisition device based on C8051F320and PC terminal as the analysis and processing system.The system is low-power consumption,the data is transmitted to the PC terminal by USB interface of the C8051F320.By using the visible virtual instrument system developing platform LabVIEW,the traditional instruments function modules are integrated into the computer,so the user can modify virtual instrument software to change its function to meet their needs.Using USB in-terface to realize real-time ECG data transmission,in addition,ECG data acquisition module is designed as the computer peripheral,which makes the syetem high-speed and portable.

    标签: C8051F320 心电监护 系统设计

    上传时间: 2013-11-13

    上传用户:zhangzhenyu

  • 基于ATmega16的标记机控制系统

    介绍了当前普通标记机控制系统现状及其存在缺点,给出气动标记机及相频修正PWM模式的工作原理。采用ATmega16单片机和USB转换RS232接口器件CH341T实现驱动控制系统与PC的实时通讯,标记控制系统可升级到USB接口。采用基于ATmega16的相频修正PWM替换555振荡电路产生的PWM,可直接通过软件调整PWM信号。使用达林顿三极管TIP122替代直流继电器驱动高频电磁阀,使得电磁阀驱动电路简单,成本低廉。该控制系统已成功应用于气动标记机。 Abstract:  In this paper,the actuality and demerit of the common gas marking machine control systems are described.The operation principle of the gas marking machine and the phase and frequency correct PWM of ATmega16is introduced.The real-time communication between the driving control system and PC by CH341T which its function is translated USB to RS232is realized,the control systems is updated grade to USB interface.The PWM signal can be adjustable by software for the555surge circuit was substituted by the phase and frequency.The high frequency electromagnetic value’s driving circuit by DC relay is replaced by TIP122,therefore,the circuit is become simple and the cost cheap.The control systems has been widely used in gas marking machine.

    标签: ATmega 16 标记 控制系统

    上传时间: 2013-10-18

    上传用户:1427796291

  • 基于单片机和基站器件EM4095的手持式低频RFID读卡器

    介绍一种采用单片机技术和基站器件EM4095的手持式低频RFID读卡器方案。首先对整个系统框架进行说明,然后介绍主要功能模块的设计,给出了各模块的原理图。重点描述了基站器件EM4095的性能参数和功能原理,最后描述了该系统的主程序流程图。 Abstract:  In this paper,a handheld RFID reader based on MCU and EM4095 is introduced.At first,the configuration of this system is explained.Then the design of main modules and schematic documents are particularly presented.The parameters and principle of the chip EM4095 are introduced in detail. At last,the main software flow is given

    标签: 4095 RFID EM 单片机

    上传时间: 2013-10-18

    上传用户:windypsm

  • 基于AT89C52单片机的温度巡回检测系统设计

    阐述了一个由上位PC机和AT89C52下位单片机组成的主从分布式温度巡回检测系统。主从机采用RS-485 串行通讯标准进行通信,可在下位单片机实现基本的温度数据巡回检测基础上,由上位PC机实现综合处理功能或扩展为远程操作。整个系统具有巡检速度快,扩展性好的特点。 Abstract:  In this paper,a top PC and AT89C52 under-bit microcontrollers from the main component of the tour distributed temperature detection system is presented. Master and slave can use RS-485 serial communication standards for communications.Based on next-bit machine for basic goods temperature detected data Tour, the top can achieve the integrated treatment of PC functions or for the expansion of long-distance operation. The entire inspection system is fast, expansion.

    标签: 89C C52 AT 89

    上传时间: 2013-10-13

    上传用户:zhoujunzhen

  • 基于AT89C51的智能矿井环境质量监控系统

     为满足矿井安全生产要求,介绍了一种以AT89C51单片机为主控器,对环境空气的温度、有毒易燃气体的浓度等进行检测的监控系统。该系统配合外围电路能实现对上述环境指标的控制并存储相关数据与上位PC机通信。它采用硬件抗干扰和软件抗干扰技术,以确保整个系统工作的准确性。 Abstract:  In order to meet the needs of mine produce safety,a kind of intellignet mine ambient monotoring and control system based on AT89C51 is introduced.This system can detect the temperature of ambient of mine,the density of poisonous inflammable gas,combined external circuit.With its function part, this system can change above-mentioned elements.

    标签: 89C C51 AT 89

    上传时间: 2013-11-10

    上传用户:wendy15

  • 基于DAC7512的数控直流恒流源设计

    为了解决磁放大器性能测试过程中,需要对其供给不同数值恒定电流的问题,设计了一种基于DAC7512和单片机的数控恒流源系统。该系统采用AT89C51作为主控器件,将计算机发送的电流控制字命令转换为D/A转换器控制字,通过模拟SPI通信接口,写D/A控制字到DAC7512,从而控制其输出相应数字电压值,经差动缩放电路、电压/电路变换电路和功率驱动电路,最后输出恒定电流。实验结果表明,恒流源输出电流调节范围为-45~+45 mA、精度为±0.1 mA,分辨率达0.024 4 mA,具有应用灵活,外围电路简单,可靠性高的特点。该数控直流恒流源也可为相关产品的测试系统研发提供参考。 Abstract:  In order to solve the need to supply different values constant current for the magnetic amplifier in testing process, numerical control constant current source system was designed based on DAC7512 chip and microcontroller technology. The system used the AT89C51 as the main chip, which can convert the current control word from computer into to D/A control words. And the system wrote D/A control word into the DAC7512 chip to control the output voltage value by the SPI communication interface, which can output corresponding constant current figures by scaling circuit, the V/I converter and power drive circuit. Experimental results show that the current source output current adjustment range is -45~+45mA, accuracy is ± 0.1mA, and resolution ratio is 0.024 4mA

    标签: 7512 DAC 数控直流 恒流源

    上传时间: 2014-12-27

    上传用户:invtnewer

  • 基于UC3854A控制的PFC中分岔现象仿真研究

       为深入了解基于UC3854A控制的PFC变换器中的动力学特性,研究系统参数变化对变换器中分岔现象的影响,在建立Boost PFC变换器双闭环数学模型的基础上,用Matlab软件对变换器中慢时标分岔及混沌等不稳定现象进行了仿真。在对PFC变换器中慢时标分岔现象仿真的基础上,分析了系统参数变化对分岔点的影响,并进行了仿真验证。仿真结果清晰地显示了输入整流电压的幅值变化对系统分岔点的影响。 Abstract:  In order to better understand the dynamics characteristic of power factor correction converter based on UC3854A, and make the way that parameters change influences the bifurcation phenomena of the system clearly. The math model of the two closed loop circuits to the Boost PFC (Power Factor Correction) converter controller was built. Then, with the help of Matlab, the simulation for nonlinear phenomena such as chaos and slow-scale bifurcation in the PFC converter was made. Finally the factors that have influence to the phenomenon of bifurcation under slow-scale in PFC converter were analyzed. The simulation results clearly show the parameters change influences the bifurcation point of the system.

    标签: 3854A 3854 PFC UC

    上传时间: 2013-10-17

    上传用户:杜莹12345

  • 基于ADuC841的膜片钳放大器系统设计

    为降低成本和解决现有膜片钳放大器系统中PC机的干扰问题,研究了一种基于单片机的膜片钳放大器小系统。该系统采用ADI公司生产的ADuC841作为控制核心,并且配置相应的液晶显示模块LCM3202401。模拟电路部分采用高输入阻抗的AD8627实现微电流信号的采集,并由后级电路进行信号的放大和电阻电容的补偿。它具有硬件电路简单、体积小、使用方便的特点。既可以单独作为小系统实现采集和显示,也可以通过红外方式和PC机进行通讯,在PC机上进行信号的处理。 Abstract:  In order to reduce cost and resolve the interferential problem with PC in existing patch clamp amplifiers, a small patch clamp amplifier system design based on microcontroller is studied. It adopts a new high performance microconverter ADuC841 by the ADI as the control core in the system, configuring a liquid crystal module LCM3202401. In the analog circuit, AD8627 with high input impedance is used to detect the low current,signal magnification, as well as resistance and capacitance compensation are accomplished by subsequent circuits. It has the advantage of simple hardware circuit design, small volume and convenient operation. It can either be used as an independent system to measure and show signal detected or transmit to PC by infrared ray.

    标签: ADuC 841 膜片钳 放大器

    上传时间: 2013-11-06

    上传用户:yy_cn

  • 基于P87LPC764单片机的延时漏电继电器设计

    介绍以P87LPC764型单片机为核心的延时型漏电继电器设计方案。该方案可供用户选择实现额定动作电流和5倍额定动作电流下不同的延时动作时间,并有重合闸设定选择功能。解决了以往传统分立元件带来的延时时间离散性大且不易实现的弊端。 Abstract:  In this paper, the delay leakage relay based on P87LPC764 is introduced in detail. This system provides different relay times at rating current and 5× rating current for users and also offers superposition brake set selection function. So that it resolves many traditional problems.

    标签: P87 764 LPC 87

    上传时间: 2013-11-08

    上传用户:zhaiye

  • 基于MSP430F149的无线环境监测传感器系统设计

    为了提高环境参数采集的自动化水平,提升效率,设计了无线传感器系统。本系统运用了传感器技术、通信技术和单片机技术,实现了对环境温度、湿度、光照度以及可燃性气体浓度等参数的检测。它能够实时地与上位机进行无线通信,满足对环境参数实时监测的要求。 Abstract:  In order to increase the degree of automation and improve the efficiency of the environment monitoring parameters,the wireless sensor system was developed.Combining with the technique of sensor,automatic monitoring,communication and single-chip microcomputer,it realized real-time monitoring environment parameters,such as temperature,humidity,illumination,concentration of com- bustible gas and so on.At the same time it can communicate with upper personal computers,satisfy the desire of real-time monitoring.

    标签: 430F F149 MSP 430

    上传时间: 2013-11-22

    上传用户:longlong12345678