虫虫首页| 资源下载| 资源专辑| 精品软件
登录| 注册

数字式绝缘电阻测试仪

  • 基于PIC16C71的数字水温配制阀的设计

      设计了一种基于PIC16C71单片机的数字水温配制阀。该配制阀采用NTC热敏电阻作温度传感器,与固定电阻组成简单分压电路作为水温测量电路,利用PIC16C71单片机内置的8位A/D转换器把热敏电阻上的模拟电压转换为数字量,PIC16C71单片机控制直流电机驱动混水阀调节冷热水的混合比例实现水温调节。给出了控制电路图,对水温测量电路的参数选择和测温精度作了详细讨论。实验和分析表明,选用阻值较大的NTC热敏电阻和分压电阻可较好地解决热敏电阻因功耗较大造成的热击穿问题。   Abstract:   A digital valve for controlling water temperature based on PIC16C71 was presented in this paper.A bleeder circuit which consisted of a NTC thermistor as temperature sensor and a fixed resistance was designed as water temperature measuring circuit.The analog voltage on the thermistor was converted into digital signal by a 8-bit A/D converter embedded in PIC16C71. Based on the digital signal, the MCU PIC16C71 drived the valve by a DC motor to adjust the water temperature through adjusting the proportion of hot water and cold water.The circuit diagram of controller was given,the principle,the component parameters and the accuracy of measuring temperatures were also dissertated in detail. It was found by experiment and analysis that thermal breakdown of thermistor caused by high power could be solved by selecting thermistor and fixed resistance with high impedance value.

    标签: PIC 16C C71 16

    上传时间: 2013-11-08

    上传用户:Yue Zhong

  • 基于ARM单片机的自动测高测距小车

    生活中许多目标的高度和水平距离需要进行测量。目前主要的测量方法,仍以传统的皮尺丈量为主,测量效率不高,有时还很不方便,没有技术成熟的数字式测高测距产品。以基本的数学方法为理论依据,利用遥控小车做为载体,采用角度传感器测量角度、霍尔传感器测量水平距离等,通过单片机LM3S615进行数据计算,实现了对待测目标物体的高度、水平距离等数据的快速、精确和数字式的测量,高度测量精度可达99.06%,水平测量精度则可达98.06%。 Abstract:  In our lives, the height and horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based measuring methods, and the measuring efficiency is low and inconvenient so some kinds of digital and portable measuring methods or instruments are needed. Based on the basic math theory, this paper designed and manufactured a portable, digital and remote controlled measuring mobile small vehicle, which assembled with angle measuring sensor for angle measurement and Hall sensor for horizontal distance measuring. MCU LM3S615 calculated the height and horizontal distance data gotten from these sensors. The measuring process is simple, the measuring results are more accurate and the measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.

    标签: ARM 单片机 自动

    上传时间: 2013-10-30

    上传用户:jackandlee

  • 8位OTP单片机芯片MC10P23XXY管脚与三星9454完

    主要特点管脚完全与三星9454兼容8位CISC型内核(MC05)4K byte OTP ROM208 byte RAM3组IO口(最多可支持17个通用IO口和1个输入口)1个PWM输出1个8位基本定时器1个8位带比较输出的定时器1个10位ADC(9路输入)2个外中断、1个定时器中断、1个PWM中断看门狗复位功能3V低压复位可选晶振/RC振荡晶振400K-8MHzRC振荡有3.2MHz(@5V,typ.)、8MHz(@5V,typ.)、外接电阻电容3种可选

    标签: 9454 10P OTP P23

    上传时间: 2013-11-05

    上传用户:Jerry_Chow

  • 基于C8051F020单片机的多路压力测量仪

    介绍了一种基于C8051F020单片机的多路压力测量仪。该测量仪选用电阻应变式压力传感器采集压力信号,并经放大电路处理后送入C8051F020单片机,再由C8051F020单片机内部的A/D转换器将采集到的压力信号进行模数转化,然后分别对数据进行存储和显示。该测量仪能测量6路压力信号,并且各测量点都能单独检测和设置。由于采用了C8051F020单片机,简化了硬件电路,增强了抗干扰能力,使得测量仪具有测量精度高,冲击小等特点。 Abstract:  A measurement apparatus for multi-channel pressure based on single chip microcomputer is introduced.It can measure 6 channels signal of the pressure,and the pressure measure points can be detection and located individually.The pressure signal sampling is obtained by resistor stress-type pressure sensors,the digital signals of 6 channels are collected through amplifying and adjustment circuit of pressure signals and internal integrated A/D converter of MCU.Finally,and it realizes the function to store and display data separately.C8051F020 was used to made hardware circuit simple,and it also enhanced the anti-interference ability.It features high precision and little impact.

    标签: C8051F020 单片机 多路 压力

    上传时间: 2013-11-16

    上传用户:yare

  • 8位OTP单片机芯片BL22P02

    概述 BL22P02是一款低功耗8位OTP型微控制器单元(MCU),适用于各类小家电控制。 主要特点 8位CISC结构CPU(Motorola HC05兼容)17个通用IO口8位实时定时器/计数器,其信号源和触发沿可由软件设定,可设置溢出中断7路键盘中断(KBI)2路外中断(INT)振荡模式晶振:32K晶振:432K-8MHz内部RC:2MHz@5V、4MHz@5V、6MHz@5V外接电阻低功耗设计(静态功耗<1uA@5V)内部自振式看门狗计数器(WDT)64byteRAM2K*8bitOTPROM串行烧写接口电路程序加密功能工作电压2.0-5.5V@(432K-4M)2.7-5.5V@(432K-8M)封装形式:DIP20、SOP20、DIP18、SOP18、DIP16、SOP16、DIP14、SOP14、DIP8、SOP8

    标签: 22P OTP P02 22

    上传时间: 2013-10-15

    上传用户:佳期如梦

  • 8位OTP单片机芯片BL22P64

    概述 BL22P64可以作为许多中高档小家电(如电磁炉、微波炉、豆浆机等)的控制芯片,这一类小家电通常都需要灵活的、可编程的控制方式,并需要AD、PWM等资源,同时满足抗电磁干扰(EMC)4KV的要求。 主要特点 ●8位CISC型内核(兼容MotorolaHC05)●4KbyteOTPROM●208byteRAM●3组IO口(最多18个IOPIN)●1个PWM输出●1个8位基本定时器●1个8位带MATCH输出的定时器●1个10位ADC(9路输入)●2个外中断、1个定时器中断、1个PWM中断●WATCHDOG●3V低压复位●可选晶振/RC振荡晶振400K-4MHzRC振荡有3.2MHz(@5V,typ.)、0.5MHz(@5V,typ.)、外接电阻3种可选●工作电压2.7-5.5V●工作温度-40-85℃●封装形式:SOP20/DIP20/SOP16

    标签: 22P OTP P64 22

    上传时间: 2013-11-06

    上传用户:DE2542

  • LAB6000U(USB接口)单片机/微控制器仿真实验系统

    伟福LAB6000U系列仿真实验系统性能特点:USB通信接口+串行通信接口含伟福先进的E6000仿真功能,硬件断点、不占用用户资源含32路、16K深度、10M的逻辑分析仪,32K深度跟踪器,8路、20M波形发生器含静态硬件测试仪(windows版本)含保护电路,仿真器部分与用户电路部分采用隔离技术,使用更加安全可靠一机多用,配置51/96/8088仿真板可以仿真MCS51/MCS96/8086具有扩展功能,在板DIP扩展座和EPLD扩展座给实验的扩展提供空间软件平台使用最新伟福E6000仿真器软件,运行于WIN9x/WINME/WINNT

    标签: 6000U 6000 LAB USB

    上传时间: 2013-10-23

    上传用户:chfanjiang

  • LPC900系列单片机ICP解决方案

    最近几年新出的一些MCU,有很多都具有ISP(In System Programming:在系统编程)特性,利用这一特性可以在无需通用编程器的情况下,方便地对芯片执行各种操作(擦除,读取,编程等操作);如果进一步配上一些软件(如Keil的ISD51),即可实现一些简单的在线调试功能(当然要损失一个串口)。一些开发者,也经常在自己的系统上预留ISP接口,以供日后升级之用。可以说ISP的广泛应用,标志着单片机开发技术的进步。 但是ISP功能的实现也有一定的限制,如需要一个串口,需要一定的驻留代码空间,或者需要一定外部电路。于是有一些经验不足的朋友,在实现ISP功能的时候便经常出问题,要么是外部电路的问题,要么是串口的问题。比如:为什么软件老是报“通信出错”;为什么我的系统,第一次可以进ISP,第二次就不行了;为什么我在Win98下无法进入ISP,换了WinXP就可以了。这些问题总是出现于一些细微的地方,一些被人忽略的地方,如果你没有充足的时间,充足的精力,充足的耐心去寻找这些根源;如果你有一台CP900编程器(当然其他的某些编程器也可以);如果你不想在那块可怜的小电路板上,再挤进一堆器件;如果你不想在购料单上再增加一批Max232,或者一批xx型电容,yy型电阻,那么请使用ICP吧(InCircuit Programming:在电路编程)。

    标签: LPC 900 ICP 单片机

    上传时间: 2013-11-19

    上传用户:pol123

  • 基于C8051F020的触摸屏驱动控制

    C8051F020单片机通过SPI接口驱动四线电阻式触摸屏控制器TSC2046,利用中断方式驱动TSC2046设计软件。介绍了触摸屏的工作原理、TSC2046工作方式以及典型应用电路。 Abstract:  The C8051F020 MCU is connected with the TSC2046 which is a 4-wire touch screen controller. The TSC2046 is controlled by interrupt mode, the? operation principle of touch screen is introduced. The operation mode of TSC2046 and typical application circuit are also discussed.

    标签: C8051F020 触摸屏 驱动控制

    上传时间: 2014-12-27

    上传用户:hwl453472107

  • 基于单总线器件DS18B20的温度测量仪

    针对目前采用的热敏电阻测量方法,提出了采用单总线数字式温度传感器DS18B20和单片机组成的新型温度测量仪。介绍DS18B20的结构和工作原理,以及单总线工作原理,给出了由Mega8单片机和DS18B20构成的单总线温度测量仪的硬件电路及软件流程图。经试验基于单总线器件DS18B20的温度测量仪,具有测量准确、测温范围宽、体积小、控制方便等优点。 Abstract:  This paper brings forward a new temperature meter composed of 1-Wire temperature sensor DS18B20 and MCU which has advantage of the thermistor. In the article, the DS18B20's structure and controlling principles are introduced and hardware circuit and software diagram of the temperature meter are given.After been tested,the temperature meter has the advantages of accurate measurement, wide temperature range, small volume and convenient controlling.

    标签: 18B B20 DS 18

    上传时间: 2013-10-31

    上传用户:hzy5825468