代码搜索：sbit
找到约 10,000 项符合「sbit」的源代码
代码结果 10,000
www.eeworm.com/read/467254/7008501
c 30-14.c
#define uchar unsigned char
#define uint unsigned int
#define ulong unsigned long
#include
sbit P10=P1^0;
sbit K1=P3^2;
uchar scale;
void main(void)
{
uint n;
RCAP2H=0xF3;
www.eeworm.com/read/467254/7008508
c 30-13.c
#define uchar unsigned char //定义一下方便使用
#define uint unsigned int
#define ulong unsigned long
#include //包括一个52标准内核的头文件
sbit P10 = P1^0; //头文件中没有定义的IO就要自己来定义了
sbit P11 = P1^1;
sb
www.eeworm.com/read/466555/7026797
txt miaobiao.txt
#include
void init();
sbit P26=P1^0;
sbit P27=P1^1;
sbit P36=P1^2;
sbit key=P2^0;
unsigned char i,t0,x,down,wait,dispbuf[3],m,num;
unsigned char code table[]=
{
0xc0,0xf9,0xa4,0xb
www.eeworm.com/read/465862/7047607
c 水塔控制.c
#include
//定义一个数组,使数码管显示的数字和数组元素的下标相等
unsigned char code table[]={0x3f,0x06,0x5b,0x4f,0x66,
0x6d,0x7d,0x07,0x7f,0x6f};
sbit shuiman=P1^0;//水满
sbit sw5=P1^1;//
www.eeworm.com/read/465898/7048470
c 串口定时步进.c
#include
//步进机控制端口定义//
sbit OPT=P2^4; //驱动器使能//
sbit SPL=P2^3; //脉冲//
sbit DIR=P2^2; //方向//
sbit ENA=P2^0; //步进机使能//
//定义默认初值为全局变量//
unsigned char maihuan=156;
//起动//
qidong(v
www.eeworm.com/read/465898/7048482
c 复件 timercom_step.c
#include
#define uchar unsigned char
#define uint unsigned int
sbit opt=P0^3; //驱动器使能//
sbit sp=P0^2; //脉冲
sbit dir=P0^1; //方向
sbit ena=P0^0; //步进机使能
sbit S2=P3^2; //启动键//
www.eeworm.com/read/243108/7097798
h lpregs.h
//-----------------------------------------------------------------------------
// File: lpregs.h
// Contents: EZ-USB FX2LP/FX1 register declarations and bit mask definitions.
//
// $Arc
www.eeworm.com/read/310274/7097838
lst flashled.lst
C51 COMPILER V7.50 FLASHLED 11/27/2006 20:38:13 PAGE 1
C51 COMPILER V7.50, COMPILATION OF MODULE FLASHLED
OBJECT MODULE PLACED I
www.eeworm.com/read/310274/7097842
c flashled.c
#include
#define BYTE unsigned char
#define WORD unsigned int
sbit LED1=P1^0;
sbit LED2=P1^1;
sbit LED3=P1^2;
sbit LED4=P1^3;
sbit LED5=P1^4;
sbit LED6=P1^5;
sbit LED7=P1^6;
sb
www.eeworm.com/read/310274/7097848
bak flashled.c.bak
#include
#define BYTE unsigned char
#define WORD unsigned int
sbit LED1=P1^0;
sbit LED2=P1^1;
sbit LED3=P1^2;
sbit LED4=P1^3;
sbit LED5=P1^4;
sbit LED6=P1^5;
sbit LED7=P1^6;
sb