代码搜索：1KHZ
找到约 286 项符合「1KHZ」的源代码
代码结果 286
www.eeworm.com/read/328695/3438096
vhd clock_1.vhd
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity clock_1 is
port(clk:in std_logic;----时钟输入 1khz
clr:in std_logic;----清零
en:in std_logic;-----暂停
www.eeworm.com/read/412366/11202650
vhd divider2.vhd
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
ENTITY divider2 IS
PORT(iCLK:in std_logic;--input,1KHz
oCLK:out std_logic);--output,1Hz
END divider2;
ARCHITECTURE arch OF divider2 IS
SIGNAL
www.eeworm.com/read/412366/11202938
vhd divider2000.vhd
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
ENTITY divider2000 IS
PORT(iCLK:in std_logic;--input,1KHz
oCLK:out std_logic);--output,1Hz
END divider2000;
ARCHITECTURE arch OF divider2000 IS
www.eeworm.com/read/412366/11202957
vhd divider1000.vhd
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
ENTITY divider1000 IS
PORT(iCLK:in std_logic;--input,1KHz
oCLK:out std_logic);--output,1Hz
END divider1000;
ARCHITECTURE arch OF divider1000 IS
www.eeworm.com/read/202997/15368265
m 陈城的作业.m
clc
clear
% Carrier frequency for modulation and demodulation
Fd=1e3
Fc=128e3;
% Generate an randm sequence of 0 and 1
% Input binary data of 1KHz
n=0:6000
data=100; %发送100个0、1随机序列
rand
www.eeworm.com/read/137912/13280081
vhd keyboard.vhd
Library IEEE;
Use IEEE.Std_Logic_1164.All;
Use IEEE.Std_Logic_Unsigned.All;
Entity Keyboard Is
Port
(clk:In Std_Logic;
--Clock:in std_logic; --扫描时钟频率不宜过高，一般在1KHz以下
KIN:In Std
www.eeworm.com/read/168324/9919945
v led.v
//led.v
/*---------------------------------------------------------------
LED显示模块：led(CLK,AF,ADDR,DATA);
功能： 显示
注意事项： 8位LED
参数： CLK: 扫妙时钟输入，推荐1kHz
AF: 数码管输出，a～h
ADDR: 数码管选择位数出，0~2
www.eeworm.com/read/350382/10746001
m 6-1.m
%例程6－1 计算非平稳随机信号的STFT时频谱
% e.g.6-1.m for example6-1;
% to test function spectrogram;
clear all;
t=0:1/1000:1.023; % 1.023 second and 1kHz sample rate
% Generate two Chirp signals and add
www.eeworm.com/read/464120/7169037
c main.c
/*Main.c*/
/*PWM步进电机控制程序,正反转,默认设置的工作频率1kHz*/
#include "global.c"
void SystemInit();
void Delay_Time() ;
void KickDog();
unsigned int tag=1;
unsigned int t_step;
main()
{
Syst