代码搜索：脉冲信号
找到约 10,000 项符合「脉冲信号」的源代码
代码结果 10,000
www.eeworm.com/read/234458/14111973
h lcd1602.h
#define RDATA XBYTE[0xc300]
#define RCMD XBYTE[0xc200]
#define WDATA XBYTE[0xc100]
#define WCMD XBYTE[0xc000]
void writecmd(uchar cmd,uchar i);//写入命令rs=0,rw=0 E高脉冲有效
void writedata(uchar ddata);/
www.eeworm.com/read/234457/14112017
h lcd1602.h
#define RDATA XBYTE[0xc300]
#define RCMD XBYTE[0xc200]
#define WDATA XBYTE[0xc100]
#define WCMD XBYTE[0xc000]
void writecmd(uchar cmd,uchar i);//写入命令rs=0,rw=0 E高脉冲有效
void writedata(uchar ddata);/
www.eeworm.com/read/234457/14112045
h lcd1602.h
#define RDATA XBYTE[0xc300]
#define RCMD XBYTE[0xc200]
#define WDATA XBYTE[0xc100]
#define WCMD XBYTE[0xc000]
void writecmd(uchar cmd,uchar i);//写入命令rs=0,rw=0 E高脉冲有效
void writedata(uchar ddata);/
www.eeworm.com/read/216263/15022493
m exa4_8.m
% exa4-8_pulseDF for example4-8
% using Butterworth analog lowpass filter to design digital lowpass filter
%利用模拟Butterworth滤波器设计数字低通滤波器
%脉冲响应不变法
wp=0.2*pi;
ws=0.3*pi;
Rp=1;
As=15;
T=1;
%性能
www.eeworm.com/read/211606/15176706
m hunpin.m
%
%混频
%
function y1=hunpin(x,f,w1,w2);
fs=100e6; %采样频率100M
Ts=1/fs;
T=0.00003; %脉冲重复周期30微秒
t=0:Ts:T-Ts;
N=length(x);
y=x.*cos(2*pi*
www.eeworm.com/read/16109/660882
51
#include
#define uchar unsigned char
#define uint unsigned int
sbit CP1=P1^0; // 左电机脉冲
sbit DIR1=P1^1; // 左电机方向 0 为开门 1为关门
sbit CP2=P1^2;
www.eeworm.com/read/17631/743860
vhd specified_temp.vhd
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity specified_temp is
port( rise:in std_logic; -----增加温度的脉冲输入 起始温度为30℃，一次增加1℃ 最大温度为45℃
down:in std_lo
www.eeworm.com/read/32279/879408
vhd specified_temp.vhd
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity specified_temp is
port( rise:in std_logic; -----增加温度的脉冲输入 起始温度为30℃，一次增加1℃ 最大温度为45℃
down:in std_lo
www.eeworm.com/read/26088/953539
51
#include
#define uchar unsigned char
#define uint unsigned int
sbit CP1=P1^0; // 左电机脉冲
sbit DIR1=P1^1; // 左电机方向 0 为开门 1为关门
sbit CP2=P1^2;
www.eeworm.com/read/26239/956165
c 自动门.c
#include
#define uchar unsigned char
#define uint unsigned int
sbit CP1=P1^0; // 左电机脉冲
sbit DIR1=P1^1; // 左电机方向 0 为开门 1为关门
sbit CP2=P1^2;