step_a.qsf

基于FPGA的直流电机的PWM控制和步进电机的细分驱动控制。使用VHDL语言编写

# Copyright (C) 1991-2005 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic       
# functions, and any output files any of the foregoing           
# (including device programming or simulation files), and any    
# associated documentation or information are expressly subject  
# to the terms and conditions of the Altera Program License      
# Subscription Agreement, Altera MegaCore Function License       
# Agreement, or other applicable license agreement, including,   
# without limitation, that your use is for the sole purpose of   
# programming logic devices manufactured by Altera and sold by   
# Altera or its authorized distributors.  Please refer to the    
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		step_a_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 4.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "12:00:20  JANUARY 28, 2005"
set_global_assignment -name LAST_QUARTUS_VERSION 5.0
set_global_assignment -name VHDL_FILE decd.vhd
set_global_assignment -name VHDL_FILE cnt5.vhd
set_global_assignment -name GDF_FILE speed.gdf
set_global_assignment -name VHDL_FILE cnt24.vhd
set_global_assignment -name GDF_FILE speed_1.gdf
set_global_assignment -name VHDL_FILE cnt2.vhd
set_global_assignment -name GDF_FILE cmp3.gdf
set_global_assignment -name VHDL_FILE cnt8.vhd
set_global_assignment -name GDF_FILE cntb.gdf
set_global_assignment -name VHDL_FILE cnt.vhd
set_global_assignment -name VHDL_FILE reg.vhd
set_global_assignment -name VHDL_FILE testctl.vhd
set_global_assignment -name VHDL_FILE freqtest.vhd
set_global_assignment -name VHDL_FILE lcnt8.vhd
set_global_assignment -name VHDL_FILE dec1.vhd
set_global_assignment -name VHDL_FILE dec2.vhd
set_global_assignment -name GDF_FILE step_a.gdf
set_global_assignment -name BDF_FILE step_a.bdf
set_global_assignment -name SIGNALTAP_FILE stp1.stp

# Pin & Location Assignments
# ==========================
set_location_assignment PIN_1 -to Z_F
set_location_assignment PIN_7 -to S
set_location_assignment PIN_2 -to D_STP
set_location_assignment PIN_93 -to clk0
set_location_assignment PIN_72 -to D[15]
set_location_assignment PIN_71 -to D[14]
set_location_assignment PIN_70 -to D[13]
set_location_assignment PIN_69 -to D[12]
set_location_assignment PIN_68 -to D[11]
set_location_assignment PIN_67 -to D[10]
set_location_assignment PIN_52 -to D[9]
set_location_assignment PIN_51 -to D[8]
set_location_assignment PIN_50 -to D[7]
set_location_assignment PIN_49 -to D[6]
set_location_assignment PIN_48 -to D[5]
set_location_assignment PIN_47 -to D[4]
set_location_assignment PIN_42 -to D[3]
set_location_assignment PIN_41 -to D[2]
set_location_assignment PIN_40 -to D[1]
set_location_assignment PIN_39 -to D[0]
set_location_assignment PIN_141 -to CNTT
set_location_assignment PIN_133 -to Y[3]
set_location_assignment PIN_134 -to Y[2]
set_location_assignment PIN_139 -to Y[1]
set_location_assignment PIN_140 -to Y[0]
set_location_assignment PIN_132 -to F
set_location_assignment PIN_96 -to DLED[1]
set_location_assignment PIN_85 -to DLED[0]
set_location_assignment PIN_16 -to clk5
set_location_assignment PIN_10 -to u_d
set_location_assignment PIN_131 -to Z
set_location_assignment PIN_26 -to cntout

# Timing Assignments
# ==================
set_global_assignment -name CUT_OFF_READ_DURING_WRITE_PATHS OFF

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL SYNPLIFY
set_global_assignment -name FAMILY Cyclone
set_global_assignment -name AUTO_LCELL_INSERTION ON
set_global_assignment -name TOP_LEVEL_ENTITY step_a

# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EP1C3T144C8
set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name MAX7000B_VCCIO_IOBANK1 3.3V
set_global_assignment -name MAX7000B_VCCIO_IOBANK2 3.3V

# Timing Analysis Assignments
# ===========================
set_global_assignment -name EXCLUDE_TPD_PATHS_LESS_THAN 0.0NS

# Assembler Assignments
# =====================
set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF

# Simulator Assignments
# =====================
set_global_assignment -name START_TIME 0.0ns
set_global_assignment -name GLITCH_INTERVAL 0.0ns
set_global_assignment -name END_TIME 200.0us

# SignalTap II Assignments
# ========================
set_global_assignment -name ENABLE_SIGNALTAP On
set_global_assignment -name USE_SIGNALTAP_FILE stp1.stp

# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF

# ---------------------------------------------
# start EDA_TOOL_SETTINGS(eda_design_synthesis)

	# Analysis & Synthesis Assignments
	# ================================
	set_global_assignment -name EDA_LMF_FILE synplcty.lmf -section_id eda_design_synthesis

# end EDA_TOOL_SETTINGS(eda_design_synthesis)
# -------------------------------------------

# ---------------------------------------
# start AUTO_INSERT_SLD_NODE_ENTITY(moto)

	# SignalTap II Assignments
	# ========================
	set_global_assignment -name SLD_NODE_CREATOR_ID 110 -section_id moto
	set_global_assignment -name SLD_NODE_ENTITY_NAME sld_signaltap -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_clk -to clk5 -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[0] -to F -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[1] -to Y[0] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[2] -to Y[1] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[3] -to Y[2] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[4] -to Y[3] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[5] -to Z -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[6] -to clk0 -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[7] -to cntout -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[0] -to F -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[1] -to Y[0] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[2] -to Y[1] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[3] -to Y[2] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[4] -to Y[3] -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[5] -to Z -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[6] -to clk0 -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[7] -to cntout -section_id moto
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT trigger_in -to clk0 -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_DATA_BITS=8" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_BITS=8" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_INFO=402681344" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_CRC_LOWORD=36472" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_CRC_HIWORD=47858" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_DATA_BIT_CNTR_BITS=3" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL=1" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_SAMPLE_DEPTH=2048" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_MEM_ADDRESS_BITS=11" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_IN_ENABLED=1" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ADVANCED_TRIGGER_ENTITY=basic,1," -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL_PIPELINE=1" -section_id moto
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ENABLE_ADVANCED_TRIGGER=0" -section_id moto

# end AUTO_INSERT_SLD_NODE_ENTITY(moto)
# -------------------------------------