mem_interface_top_data_gen_16.txt

基于Xilinx FPGA的DDRSDRAM的Verilog控制代码

///////////////////////////////////////////////////////////////////////////////
// Copyright (c) 2005 Xilinx, Inc.
// This design is confidential and proprietary of Xilinx, All Rights Reserved.
///////////////////////////////////////////////////////////////////////////////
//   ____  ____
//  /   /\/   /
// /___/  \  /   Vendor             : Xilinx
// \   \   \/    Version            : $Name: mig_v1_7 $
//  \   \        Application        : MIG
//  /   /        Filename           : mem_interface_top_data_gen_16.v
// /___/   /\    Date Last Modified : $Date: 2007/02/15 12:06:15 $
// \   \  /  \   Date Created       : Mon May 2 2005
//  \___\/\___\
//
// Device      : Virtex-4
// Design Name : DDR SDRAM
// Description: Contains the data generation logic for a 8 bit data.
///////////////////////////////////////////////////////////////////////////////

`timescale 1ns / 1ps



module mem_interface_top_data_gen_16
  (
   input            clk0,
   input            rst,
   input            bkend_data_en,
   input            bkend_rd_data_valid,

   output reg [31:0]app_Wdf_data,
   output reg [3:0] app_mask_data,
   output[31:0]     app_compare_data,
   output reg       app_Wdf_WrEn
   );



   reg [1:0]        wr_state;
   reg [1:0]        rd_state;
   reg [15:0]       wr_data_pattern ;
   reg [15:0]       rd_data_pattern ;
   reg              app_Wdf_WrEn_r;
   reg              app_Wdf_WrEn_2r;
   reg              app_Wdf_WrEn_3r;
   reg              bkend_rd_data_valid_r;
   reg              rst_r;
   wire [31:0]      app_Wdf_data_r ;
   reg [31:0]       app_Wdf_data_1r ;
   reg [31:0]       app_Wdf_data_2r ;

   wire [3:0]       app_mask_data_r ;
   reg [3:0]        app_mask_data_1r ;
   reg [3:0]        app_mask_data_2r ;

   wire [15:0]      rd_rising_edge_data;
   wire [15:0]      rd_falling_edge_data;
   wire [1:0]       wr_data_mask_fall;
   wire [1:0]       wr_data_mask_rise;


   localparam       wr_idle_first_data= 2'b00;
   localparam       wr_second_data    = 2'b01;
   localparam       wr_third_data     = 2'b10;
   localparam       wr_fourth_data    = 2'b11;
   localparam       rd_idle_first_data= 2'b00;
   localparam       rd_second_data    = 2'b01;
   localparam       rd_third_data     = 2'b10;
   localparam       rd_fourth_data    = 2'b11;


   assign wr_data_mask_rise = 2'd0;
   assign wr_data_mask_fall = 2'd0;

   always @( posedge clk0 )
     rst_r <= rst;

   // DATA generation for WRITE DATA FIFOs & for READ DATA COMPARE

   // write data generation
   always @ (posedge clk0) begin
      if (rst_r)
        begin
           wr_data_pattern[15:0] <= 16'h0000;
           wr_state <= wr_idle_first_data;
        end
      else begin
         case (wr_state)
           wr_idle_first_data :  begin
              if (bkend_data_en == 1'b1)
                begin
                   wr_data_pattern[15:0] <= 16'hFFFF;
                   wr_state <= wr_second_data;
                  end
              else
                wr_state <= wr_idle_first_data;
           end

           wr_second_data :   begin
              if (bkend_data_en == 1'b1)
                begin
                   wr_data_pattern[15:0] <= 16'hAAAA;
                   wr_state <= wr_third_data;
                end
              else
                wr_state <= wr_second_data;
           end

           wr_third_data :      begin
              if (bkend_data_en == 1'b1)
                begin
                   wr_data_pattern[15:0] <= 16'h5555;
                   wr_state <= wr_fourth_data;
                end
              else
                wr_state <= wr_third_data;
           end

           wr_fourth_data :     begin
              if (bkend_data_en == 1'b1)
                begin
                   wr_data_pattern[15:0] <= 16'h9999;
                   wr_state <= wr_idle_first_data;
                end
              else
                wr_state <= wr_fourth_data;
           end
         endcase
      end
   end

   assign app_Wdf_data_r[31:0] = (app_Wdf_WrEn_r) ? {wr_data_pattern[15:0],
                                  ~wr_data_pattern[15:0]} : 32'h00000000;

   assign app_mask_data_r[3:0] = (app_Wdf_WrEn_r) ? {wr_data_mask_rise[1:0],
                                 wr_data_mask_fall[1:0]} : 4'h0;

   always @ (posedge clk0) begin
      if (rst_r) begin
         app_Wdf_data_1r <= 32'h00000000;
         app_Wdf_data_2r <= 32'h00000000;
         app_Wdf_data    <= 32'h00000000;
      end
      else begin
         app_Wdf_data_1r <= app_Wdf_data_r ;
         app_Wdf_data_2r <= app_Wdf_data_1r;
         app_Wdf_data    <= app_Wdf_data_2r;
      end
   end

   always @ (posedge clk0) begin
      if (rst_r) begin
         app_mask_data_1r <= 4'h0;
         app_mask_data_2r <= 4'h0;
         app_mask_data    <= 4'h0;
      end
      else begin
         app_mask_data_1r <= app_mask_data_r ;
         app_mask_data_2r <= app_mask_data_1r;
         app_mask_data    <= app_mask_data_2r;
      end
   end

   always @ (posedge clk0) begin
      if (rst_r) begin
         app_Wdf_WrEn_r <= 1'b0;
         app_Wdf_WrEn_2r <= 1'b0;
         app_Wdf_WrEn_3r <= 1'b0;
         app_Wdf_WrEn <= 1'b0;
      end
      else begin
         app_Wdf_WrEn_r <= bkend_data_en;
         app_Wdf_WrEn_2r <= app_Wdf_WrEn_r;
         app_Wdf_WrEn_3r <= app_Wdf_WrEn_2r;
         app_Wdf_WrEn <= app_Wdf_WrEn_3r;
      end
   end

   always @ (posedge clk0) begin
      if (rst_r) begin
         bkend_rd_data_valid_r <= 1'b0;
      end
      else begin
         bkend_rd_data_valid_r <= bkend_rd_data_valid;
      end
   end

   // read comparison data generation
   always @ (posedge clk0) begin
      if (rst_r) begin
         rd_data_pattern[15:0] <= 16'h0000;
         rd_state <= rd_idle_first_data;
      end
      else begin
         case (rd_state)
           rd_idle_first_data :  begin
              if (bkend_rd_data_valid) begin
                 rd_data_pattern[15:0] <= 16'hFFFF;
                 rd_state <= rd_second_data;
              end
              else
                rd_state <= rd_idle_first_data;
           end

           rd_second_data :     begin
              if (bkend_rd_data_valid) begin
                 rd_data_pattern[15:0] <= 16'hAAAA;
                 rd_state <= rd_third_data;
              end
              else
                rd_state <= rd_second_data;

           end

           rd_third_data :      begin
              if (bkend_rd_data_valid) begin
                 rd_data_pattern[15:0] <= 16'h5555;
                 rd_state <= rd_fourth_data;
              end
              else
                rd_state <= rd_third_data;
           end

           rd_fourth_data :     begin
              if (bkend_rd_data_valid) begin
                 rd_data_pattern[15:0] <= 16'h9999;
                 rd_state <= rd_idle_first_data;
              end
              else
                rd_state <= rd_fourth_data;
           end
         endcase
      end
   end

   assign rd_rising_edge_data[15:0]  = { rd_data_pattern[15:0]};
   assign rd_falling_edge_data[15:0] = { ~rd_data_pattern[15:0]};

   //data to the compare circuit during read
   assign app_compare_data[31:0] = (bkend_rd_data_valid_r) ?
                                   {rd_rising_edge_data[15:0],
                                   rd_falling_edge_data[15:0]} : 32'h00000000;

endmodule