📄 jianzhong.map.rpt
字号:
+--------------------------------------------------------------------------------+
; Registers Removed During Synthesis ;
+---------------------------------------+----------------------------------------+
; Register name ; Reason for Removal ;
+---------------------------------------+----------------------------------------+
; y[0]~reg0 ; Stuck at VCC due to stuck port data_in ;
; Total Number of Removed Registers = 1 ; ;
+---------------------------------------+----------------------------------------+
+------------------------------------------------------+
; General Register Statistics ;
+----------------------------------------------+-------+
; Statistic ; Value ;
+----------------------------------------------+-------+
; Total registers ; 37 ;
; Number of registers using Synchronous Clear ; 18 ;
; Number of registers using Synchronous Load ; 0 ;
; Number of registers using Asynchronous Clear ; 25 ;
; Number of registers using Asynchronous Load ; 7 ;
; Number of registers using Clock Enable ; 37 ;
; Number of registers using Preset ; 0 ;
+----------------------------------------------+-------+
+-----------------------------------------------+
; Source assignments for lpm_counter:a_rtl_0 ;
+---------------------------+-------+------+----+
; Assignment ; Value ; From ; To ;
+---------------------------+-------+------+----+
; SUPPRESS_DA_RULE_INTERNAL ; a101 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s102 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s103 ; - ; - ;
+---------------------------+-------+------+----+
+-----------------------------------------------+
; Source assignments for lpm_counter:c_rtl_1 ;
+---------------------------+-------+------+----+
; Assignment ; Value ; From ; To ;
+---------------------------+-------+------+----+
; SUPPRESS_DA_RULE_INTERNAL ; a101 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s102 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s103 ; - ; - ;
+---------------------------+-------+------+----+
+---------------------------------------------------+
; Source assignments for lpm_counter:\x2:i[0]_rtl_2 ;
+---------------------------+-------+------+--------+
; Assignment ; Value ; From ; To ;
+---------------------------+-------+------+--------+
; SUPPRESS_DA_RULE_INTERNAL ; a101 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s102 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s103 ; - ; - ;
+---------------------------+-------+------+--------+
+----------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:a_rtl_0 ;
+------------------------+-------------------+-------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------------+-------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 4 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; LPM_PORT_UPDOWN ; PORT_CONNECTIVITY ; Untyped ;
; DEVICE_FAMILY ; ACEX1K ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+-------------------+-------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+----------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:c_rtl_1 ;
+------------------------+-------------------+-------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------------+-------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 4 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; LPM_PORT_UPDOWN ; PORT_CONNECTIVITY ; Untyped ;
; DEVICE_FAMILY ; ACEX1K ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+-------------------+-------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+-----------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:\x2:i[0]_rtl_2 ;
+------------------------+-------------------+--------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------------+--------------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 10 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; LPM_PORT_UPDOWN ; PORT_CONNECTIVITY ; Untyped ;
; DEVICE_FAMILY ; ACEX1K ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+-------------------+--------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
Info: Version 7.2 Build 151 09/26/2007 SJ Full Version
Info: Processing started: Sun May 24 09:21:43 2009
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off jianzhong -c jianzhong
Info: Found 2 design units, including 1 entities, in source file jianzhong.vhd
Info: Found design unit 1: jianzhong-zhong
Info: Found entity 1: jianzhong
Info: Elaborating entity "jianzhong" for the top level hierarchy
Warning (10631): VHDL Process Statement warning at jianzhong.vhd(11): inferring latch(es) for signal or variable "f", which holds its previous value in one or more paths through the process
Info (10041): Inferred latch for "f[0]" at jianzhong.vhd(11)
Info (10041): Inferred latch for "f[1]" at jianzhong.vhd(11)
Info (10041): Inferred latch for "f[2]" at jianzhong.vhd(11)
Info: Power-up level of register "y[0]~reg0" is not specified -- using power-up level of High to minimize register
Warning (14130): Reduced register "y[0]~reg0" with stuck data_in port to stuck value VCC
Info: Inferred 3 megafunctions from design logic
Info: Inferred lpm_counter megafunction (LPM_WIDTH=4) from the following logic: "a[0]~4"
Info: Inferred lpm_counter megafunction (LPM_WIDTH=4) from the following logic: "c[0]~20"
Info: Inferred lpm_counter megafunction (LPM_WIDTH=10) from the following logic: "\x2:i[0]~0"
Info: Found 1 design units, including 1 entities, in source file d:/program files/altera/72/quartus/libraries/megafunctions/lpm_counter.tdf
Info: Found entity 1: lpm_counter
Info: Elaborated megafunction instantiation "lpm_counter:a_rtl_0"
Info: Found 1 design units, including 1 entities, in source file d:/program files/altera/72/quartus/libraries/megafunctions/alt_counter_f10ke.tdf
Info: Found entity 1: alt_counter_f10ke
Info: Elaborated megafunction instantiation "lpm_counter:a_rtl_0|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:a_rtl_0"
Info: Instantiated megafunction "lpm_counter:a_rtl_0" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "UP"
Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Info: Elaborated megafunction instantiation "lpm_counter:\x2:i[0]_rtl_2"
Info: Elaborated megafunction instantiation "lpm_counter:\x2:i[0]_rtl_2|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:\x2:i[0]_rtl_2"
Info: Instantiated megafunction "lpm_counter:\x2:i[0]_rtl_2" with the following parameter:
Info: Parameter "LPM_WIDTH" = "10"
Info: Parameter "LPM_DIRECTION" = "UP"
Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Warning: Output pins are stuck at VCC or GND
Warning (13410): Pin "y[0]" stuck at VCC
Info: Implemented 176 device resources after synthesis - the final resource count might be different
Info: Implemented 9 input pins
Info: Implemented 12 output pins
Info: Implemented 155 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 4 warnings
Info: Allocated 160 megabytes of memory during processing
Info: Processing ended: Sun May 24 09:21:48 2009
Info: Elapsed time: 00:00:05
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -