miller.fit.qmsg

使用VHDL实现基带码中密勒码的编解码

{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 3 16 " "Info: I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 3 total pin(s) used --  16 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 23 " "Info: I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  23 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 1 22 " "Info: I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used --  22 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 24 " "Info: I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  24 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0 0}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Info: Fitter preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "1.530 ns register register " "Info: Estimated most critical path is register to register delay of 1.530 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns sav1 1 REG LAB_X1_Y5 6 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X1_Y5; Fanout = 6; REG Node = 'sav1'" {  } { { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { sav1 } "NODE_NAME" } } { "miller_encoder.vhd" "" { Text "E:/通信原理/实验五/miller/miller_encoder.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.348 ns) + CELL(0.275 ns) 0.623 ns encodeout\[0\]~488 2 COMB LAB_X1_Y5 3 " "Info: 2: + IC(0.348 ns) + CELL(0.275 ns) = 0.623 ns; Loc. = LAB_X1_Y5; Fanout = 3; COMB Node = 'encodeout\[0\]~488'" {  } { { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "0.623 ns" { sav1 encodeout[0]~488 } "NODE_NAME" } } { "miller_encoder.vhd" "" { Text "E:/通信原理/实验五/miller/miller_encoder.vhd" 22 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.247 ns) + CELL(0.660 ns) 1.530 ns encodeout\[0\]~reg0 3 REG LAB_X1_Y5 1 " "Info: 3: + IC(0.247 ns) + CELL(0.660 ns) = 1.530 ns; Loc. = LAB_X1_Y5; Fanout = 1; REG Node = 'encodeout\[0\]~reg0'" {  } { { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "0.907 ns" { encodeout[0]~488 encodeout[0]~reg0 } "NODE_NAME" } } { "miller_encoder.vhd" "" { Text "E:/通信原理/实验五/miller/miller_encoder.vhd" 22 0 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.935 ns ( 61.11 % ) " "Info: Total cell delay = 0.935 ns ( 61.11 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.595 ns ( 38.89 % ) " "Info: Total interconnect delay = 0.595 ns ( 38.89 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0 0}  } { { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "1.530 ns" { sav1 encodeout[0]~488 encodeout[0]~reg0 } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y0 X13_Y14 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y0 to location X13_Y14" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "2 " "Warning: Found 2 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "encodeout\[0\] 0 " "Info: Pin \"encodeout\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "encodeout\[1\] 0 " "Info: Pin \"encodeout\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "E:/通信原理/实验五/miller/miller.fit.smsg " "Info: Generated suppressed messages file E:/通信原理/实验五/miller/miller.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "183 " "Info: Peak virtual memory: 183 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Thu May 14 00:25:39 2009 " "Info: Processing ended: Thu May 14 00:25:39 2009" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Info: Total CPU time (on all processors): 00:00:03" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 0}