seg7.fit

一个用VHDL编写的秒表程序

-- MAX+plus II Compiler Fit File      
-- Version 9.23 3/19/99               
-- Compiled: 02/20/2009 22:31:44      

-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "seg7"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "q0"                           : INPUT_PIN  = 84     ;
    "q1"                           : INPUT_PIN  = 2      ;
    "q2"                           : INPUT_PIN  = 44     ;
    "q3"                           : INPUT_PIN  = 42     ;
    "segment0"                     : OUTPUT_PIN = 71     ;
    "segment1"                     : OUTPUT_PIN = 16     ;
    "segment2"                     : OUTPUT_PIN = 17     ;
    "segment3"                     : OUTPUT_PIN = 18     ;
    "segment4"                     : OUTPUT_PIN = 19     ;
    "segment5"                     : OUTPUT_PIN = 73     ;
    "segment6"                     : OUTPUT_PIN = 72     ;
    ":373"                         : LOCATION   = LC2_A2 ;
    ":404"                         : LOCATION   = LC1_A1 ;
    ":437"                         : LOCATION   = LC7_A1 ;
    ":470"                         : LOCATION   = LC5_A1 ;
    ":503"                         : LOCATION   = LC3_A5 ;
    ":536"                         : LOCATION   = LC1_A4 ;
    ":569"                         : LOCATION   = LC4_A3 ;

END;

INTERNAL_INFO "seg7"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD0P84  : LORAX = "1:FB0|2:FH0R0|3:PA0R0C0->LC1_A1,->LC7_A1,->LC5_A1|,3:PA0R0C1->LC2_A2|,3:PA0R0C2->LC4_A3|,3:PA0R0C3->LC1_A4|,3:PA0R0C4->LC3_A5|||";
    OD1P2   : LORAX = "1:FB1|2:FH1R0|3:PA20R0C0->LC1_A1,->LC7_A1,->LC5_A1|,3:PA20R0C1->LC2_A2|,3:PA20R0C2->LC4_A3|,3:PA20R0C3->LC1_A4|,3:PA20R0C4->LC3_A5|||";
    OD2P44  : LORAX = "1:FB2|2:FH2R0|3:PA6R0C0->LC1_A1,->LC7_A1,->LC5_A1|,3:PA6R0C1->LC2_A2|,3:PA6R0C2->LC4_A3|,3:PA6R0C3->LC1_A4|,3:PA6R0C4->LC3_A5|||";
    OD3P42  : LORAX = "1:FB3|2:FH3R0|3:PA5R0C0->LC1_A1,->LC7_A1,->LC5_A1|,3:PA5R0C1->LC2_A2|,3:PA5R0C2->LC4_A3|,3:PA5R0C3->LC1_A4|,3:PA5R0C4->LC3_A5|||";
    LC2_A2  : LORAX = "1:MSW2R0C0,G17R0->OH2R0P72|";
    LC1_A1  : LORAX = "1:MSW0R0C0,G39R0->OH0R0P73|";
    LC7_A1  : LORAX = "1:MSW6R0C0,HHL29R0->OH14R0P19|";
    LC5_A1  : LORAX = "1:MSW4R0C0,HHL41R0->OH12R0P18|";
    LC3_A5  : LORAX = "1:MSW2R0C4,HHL0R0->OH10R0P17|";
    LC1_A4  : LORAX = "1:MSW0R0C3,HHL19R0->OH8R0P16|";
    LC4_A3  : LORAX = "1:MSW3R0C2,G23R0->OH3R0P71|";
	LC2_A2  : LORAX2 = "OD1P2, OD2P44, OD0P84, OD3P42";
	LC1_A1  : LORAX2 = "OD1P2, OD3P42, OD0P84, OD2P44";
	LC7_A1  : LORAX2 = "OD1P2, OD3P42, OD0P84, OD2P44";
	LC5_A1  : LORAX2 = "OD1P2, OD3P42, OD0P84, OD2P44";
	LC3_A5  : LORAX2 = "OD1P2, OD2P44, OD0P84, OD3P42";
	LC1_A4  : LORAX2 = "OD1P2, OD3P42, OD0P84, OD2P44";
	LC4_A3  : LORAX2 = "OD1P2, OD2P44, OD0P84, OD3P42";
END;