time_counter.fit

一个用VHDL编写的秒表程序

-- MAX+plus II Compiler Fit File      
-- Version 9.23 3/19/99               
-- Compiled: 02/20/2009 22:28:59      

-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "time_counter"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk0"                         : INPUT_PIN  = 43     ;
    "enable"                       : INPUT_PIN  = 84     ;
    "reset0"                       : INPUT_PIN  = 2      ;
    "sysreset"                     : INPUT_PIN  = 44     ;
    "hr0"                          : OUTPUT_PIN = 65     ;
    "hr1"                          : OUTPUT_PIN = 66     ;
    "hr2"                          : OUTPUT_PIN = 21     ;
    "hr3"                          : OUTPUT_PIN = 25     ;
    "hr100"                        : OUTPUT_PIN = 64     ;
    "hr101"                        : OUTPUT_PIN = 62     ;
    "hr102"                        : OUTPUT_PIN = 69     ;
    "hr103"                        : OUTPUT_PIN = 73     ;
    "min0"                         : OUTPUT_PIN = 22     ;
    "min1"                         : OUTPUT_PIN = 24     ;
    "min2"                         : OUTPUT_PIN = 23     ;
    "min3"                         : OUTPUT_PIN = 67     ;
    "min100"                       : OUTPUT_PIN = 7      ;
    "min101"                       : OUTPUT_PIN = 6      ;
    "min102"                       : OUTPUT_PIN = 8      ;
    "sec0"                         : OUTPUT_PIN = 17     ;
    "sec1"                         : OUTPUT_PIN = 18     ;
    "sec2"                         : OUTPUT_PIN = 19     ;
    "sec3"                         : OUTPUT_PIN = 72     ;
    "sec010"                       : OUTPUT_PIN = 28     ;
    "sec0010"                      : OUTPUT_PIN = 29     ;
    "sec011"                       : OUTPUT_PIN = 30     ;
    "sec0011"                      : OUTPUT_PIN = 61     ;
    "sec012"                       : OUTPUT_PIN = 27     ;
    "sec0012"                      : OUTPUT_PIN = 59     ;
    "sec0013"                      : OUTPUT_PIN = 58     ;
    "sec013"                       : OUTPUT_PIN = 60     ;
    "sec100"                       : OUTPUT_PIN = 16     ;
    "sec101"                       : OUTPUT_PIN = 70     ;
    "sec102"                       : OUTPUT_PIN = 71     ;
    "|count3:u7|:7"                : LOCATION   = LC2_B1 ;  -- |count3:u7|q_temp1
    "|count3:u7|:8"                : LOCATION   = LC4_B1 ;  -- |count3:u7|q_temp0
    "|count4:u6|:7"                : LOCATION   = LC2_B8 ;  -- |count4:u6|q_temp1
    "|count4:u6|:8"                : LOCATION   = LC1_B11;  -- |count4:u6|q_temp0
    "|count4:u6|:133"              : LOCATION   = LC6_B1 ;
    "|count6:u3|:8"                : LOCATION   = LC3_A2 ;  -- |count6:u3|q_temp2
    "|count6:u3|:9"                : LOCATION   = LC5_A2 ;  -- |count6:u3|q_temp1
    "|count6:u3|:10"               : LOCATION   = LC4_A2 ;  -- |count6:u3|q_temp0
    "|count6:u3|:104"              : LOCATION   = LC2_A2 ;
    "|count6:u3|:116"              : LOCATION   = LC6_A2 ;
    "|count6:u3|:180"              : LOCATION   = LC1_A2 ;
    "|count6:u5|:8"                : LOCATION   = LC2_B3 ;  -- |count6:u5|q_temp2
    "|count6:u5|:9"                : LOCATION   = LC3_B3 ;  -- |count6:u5|q_temp1
    "|count6:u5|:10"               : LOCATION   = LC4_B3 ;  -- |count6:u5|q_temp0
    "|count6:u5|:104"              : LOCATION   = LC5_B3 ;
    "|count6:u5|:116"              : LOCATION   = LC6_B3 ;
    "|count6:u5|:180"              : LOCATION   = LC1_B3 ;
    "|count10:u0|LPM_ADD_SUB:77|addcore:adder|:55" : LOCATION   = LC3_C6 ;
    "|count10:u0|:9"               : LOCATION   = LC7_C6 ;  -- |count10:u0|q_temp3
    "|count10:u0|:10"              : LOCATION   = LC5_C6 ;  -- |count10:u0|q_temp2
    "|count10:u0|:11"              : LOCATION   = LC3_C5 ;  -- |count10:u0|q_temp1
    "|count10:u0|:12"              : LOCATION   = LC5_C11;  -- |count10:u0|q_temp0
    "|count10:u0|:52"              : LOCATION   = LC4_C6 ;
    "|count10:u0|:130"             : LOCATION   = LC6_C6 ;
    "|count10:u0|~130~1"           : LOCATION   = LC2_C6 ;
    "|count10:u0|:142"             : LOCATION   = LC8_C6 ;
    "|count10:u0|:151"             : LOCATION   = LC4_C5 ;
    "|count10:u0|:227"             : LOCATION   = LC1_C6 ;
    "|count10:u1|LPM_ADD_SUB:77|addcore:adder|:55" : LOCATION   = LC2_C8 ;
    "|count10:u1|:9"               : LOCATION   = LC4_C8 ;  -- |count10:u1|q_temp3
    "|count10:u1|:10"              : LOCATION   = LC1_C5 ;  -- |count10:u1|q_temp2
    "|count10:u1|:11"              : LOCATION   = LC7_C5 ;  -- |count10:u1|q_temp1
    "|count10:u1|:12"              : LOCATION   = LC3_C12;  -- |count10:u1|q_temp0
    "|count10:u1|:52"              : LOCATION   = LC5_C8 ;
    "|count10:u1|:130"             : LOCATION   = LC6_C8 ;
    "|count10:u1|~130~1"           : LOCATION   = LC3_C8 ;
    "|count10:u1|:142"             : LOCATION   = LC5_C5 ;
    "|count10:u1|:151"             : LOCATION   = LC2_C5 ;
    "|count10:u1|:227"             : LOCATION   = LC1_C8 ;
    "|count10:u2|LPM_ADD_SUB:77|addcore:adder|:55" : LOCATION   = LC8_A4 ;
    "|count10:u2|:9"               : LOCATION   = LC3_A4 ;  -- |count10:u2|q_temp3
    "|count10:u2|:10"              : LOCATION   = LC7_A4 ;  -- |count10:u2|q_temp2
    "|count10:u2|:11"              : LOCATION   = LC5_A4 ;  -- |count10:u2|q_temp1
    "|count10:u2|:12"              : LOCATION   = LC3_A11;  -- |count10:u2|q_temp0
    "|count10:u2|:52"              : LOCATION   = LC1_A10;
    "|count10:u2|:130"             : LOCATION   = LC2_A4 ;
    "|count10:u2|~130~1"           : LOCATION   = LC1_A4 ;
    "|count10:u2|:142"             : LOCATION   = LC4_A4 ;
    "|count10:u2|:151"             : LOCATION   = LC6_A4 ;
    "|count10:u2|:227"             : LOCATION   = LC7_A2 ;
    "|count10:u4|LPM_ADD_SUB:77|addcore:adder|:55" : LOCATION   = LC4_B9 ;
    "|count10:u4|:9"               : LOCATION   = LC1_B9 ;  -- |count10:u4|q_temp3
    "|count10:u4|:10"              : LOCATION   = LC4_B7 ;  -- |count10:u4|q_temp2
    "|count10:u4|:11"              : LOCATION   = LC6_B7 ;  -- |count10:u4|q_temp1
    "|count10:u4|:12"              : LOCATION   = LC2_B12;  -- |count10:u4|q_temp0
    "|count10:u4|:52"              : LOCATION   = LC5_B9 ;
    "|count10:u4|:130"             : LOCATION   = LC6_B9 ;
    "|count10:u4|~130~1"           : LOCATION   = LC3_B9 ;
    "|count10:u4|:142"             : LOCATION   = LC2_B7 ;
    "|count10:u4|:151"             : LOCATION   = LC1_B7 ;
    "|count10:u4|:227"             : LOCATION   = LC2_B9 ;