cnt65536.fit

（1） 计数器的输入为RST（复位）

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 03/08/2009 10:49:03      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt65536"
BEGIN

    DEVICE = "EPM7064AELC44-4";

    "CLK"                          : INPUT_PIN  = 43     ;
    "EN"                           : INPUT_PIN  = 12     ; -- LC1
    "RST"                          : INPUT_PIN  = 11     ; -- LC3
    "U_D"                          : INPUT_PIN  = 9      ; -- LC4
    "COUT"                         : OUTPUT_PIN = 37     ; -- LC53
    "CQ0"                          : OUTPUT_PIN = 18     ; -- LC21
    "CQ1"                          : OUTPUT_PIN = 29     ; -- LC41
    "CQ2"                          : OUTPUT_PIN = 28     ; -- LC40
    "CQ3"                          : OUTPUT_PIN = 27     ; -- LC37
    "CQ4"                          : OUTPUT_PIN = 26     ; -- LC36
    "CQ5"                          : OUTPUT_PIN = 25     ; -- LC35
    "CQ6"                          : OUTPUT_PIN = 24     ; -- LC33
    "CQ7"                          : OUTPUT_PIN = 21     ; -- LC17
    "CQ8"                          : OUTPUT_PIN = 31     ; -- LC46
    "CQ9"                          : OUTPUT_PIN = 39     ; -- LC57
    "CQ10"                         : OUTPUT_PIN = 34     ; -- LC51
    "CQ11"                         : OUTPUT_PIN = 33     ; -- LC49
    "CQ12"                         : OUTPUT_PIN = 36     ; -- LC52
    "CQ13"                         : OUTPUT_PIN = 40     ; -- LC62
    "CQ14"                         : OUTPUT_PIN = 41     ; -- LC64
    "CQ15"                         : OUTPUT_PIN = 19     ; -- LC20
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC43   ;
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder0|result_node6" : LOCATION   = LC48   ; -- PIN 32
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder0|result_node7" : LOCATION   = LC34   ;
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder1|result_node5" : LOCATION   = LC54   ;
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder1|result_node6" : LOCATION   = LC60   ;
    "|LPM_ADD_SUB:235|addcore:adder|addcore:adder1|result_node7" : LOCATION   = LC63   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder0|gcp2" : LOCATION   = LC39   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC38   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder0|result_node6" : LOCATION   = LC44   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder0|result_node7" : LOCATION   = LC42   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder1|result_node5" : LOCATION   = LC50   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder1|result_node6" : LOCATION   = LC61   ;
    "|LPM_ADD_SUB:316|addcore:adder|addcore:adder1|result_node7" : LOCATION   = LC59   ;
    "~659~1"                       : LOCATION   = LC55   ;
    "~662~1"                       : LOCATION   = LC56   ; -- PIN 38
    "~664~1"                       : LOCATION   = LC58   ;

END;

INTERNAL_INFO "cnt65536"
BEGIN
	DEVICE = EPM7064AELC44-4;
	LC20    : LORAX = "G57R0,PA17R0C3,PA9R0C1";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC62    : LORAX = "G112R0,PA30R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3";
	LC49    : LORAX = "G29R0,PA8R0C3";
	LC51    : LORAX = "G31R0,PA3R0C3";
	LC57    : LORAX = "G78R0,PA24R0C3";
	LC46    : LORAX = "G75R0,PA20R0C3";
	LC17    : LORAX = "G54R0,PA13R0C2,PA13R0C1,PA13R0C3";
	LC33    : LORAX = "G58R0,PA11R0C2,PA11R0C3";
	LC35    : LORAX = "G60R0,PA12R0C2,PA16R0C3";
	LC36    : LORAX = "G61R0,PA9R0C2,PA9R0C3";
	LC37    : LORAX = "G25R0,PA2R0C2,PA2R0C3";
	LC40    : LORAX = "G28R0,PA0R0C2,PA0R0C3";
	LC41    : LORAX = "G107R0,PA27R0C2,PA27R0C3";
	LC21    : LORAX = "G21R0,PA7R0C3,PA7R0C2";
	LC53    : LORAX = "G62R0";
	OH0R0P12 : LORAX = "G83R0,PA18R0C3,PA19R0C1,PA18R0C2";
	OH3R0P9 : LORAX = "G86R0,PA22R0C2,PA22R0C1,PA26R0C3";
	LC63    : LORAX = "G113R0,PA27R0C1";
	LC59    : LORAX = "G80R0,PA18R0C1";
	OH2R0P11 : LORAX = "G85R0,PA21R0C1,PA21R0C2,PA23R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC61    : LORAX = "G111R0,PA33R0C3";
	LC54    : LORAX = "G63R0,PA14R0C3";
	LC50    : LORAX = "G30R0,PA6R0C3";
	LC34    : LORAX = "G59R0,PA10R0C1";
	LC42    : LORAX = "G108R0,PA29R0C1";
	LC48    : LORAX = "G77R0,PA25R0C2";
	LC44    : LORAX = "G110R0,PA34R0C2";
	LC43    : LORAX = "G109R0,PA28R0C2";
	LC38    : LORAX = "G26R0,PA1R0C2";
	LC39    : LORAX = "G27R0,PA3R0C2";
	LC55    : LORAX = "G64R0,PA12R0C3";
	LC56    : LORAX = "G65R0,PA10R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
END;