minififo.vhdl

来自「blowfish vhdl version」· VHDL 代码 · 共 81 行

VHDL
81
字号
-- Copyright © 2007 Wesley J. Landaker <wjl@icecavern.net>-- -- This program is free software: you can redistribute it and/or modify-- it under the terms of the GNU General Public License as published by-- the Free Software Foundation, either version 3 of the License, or-- (at your option) any later version.-- -- This program is distributed in the hope that it will be useful,-- but WITHOUT ANY WARRANTY; without even the implied warranty of-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the-- GNU General Public License for more details.-- -- You should have received a copy of the GNU General Public License-- along with this program.  If not, see <http://www.gnu.org/licenses/>.library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity MiniFIFO is  generic (    param_DATA_WIDTH : positive := 32    );  port (    -- Reset & Clock    RST_I : in std_logic := '0';    CLK_I : in std_logic;    -- Write Interface    W_EN_I   : in  std_logic;    W_DATA_I : in  std_logic_vector(param_DATA_WIDTH-1 downto 0);    W_FULL_O : out std_logic;    -- Read Interface    R_EN_I    : in  std_logic;    R_DATA_O  : out std_logic_vector(param_DATA_WIDTH-1 downto 0);    R_EMPTY_O : out std_logic    );end entity;architecture rtl of MiniFIFO is  signal valid : std_logic := '0';  begin    proc_valid : process (CLK_I, RST_I) is  begin    if RST_I = '1' then      valid <= '0';    elsif rising_edge(CLK_I) then      if W_EN_I = '1' then        valid <= '1';      elsif R_EN_I = '1' and valid = '1' then        valid <= '0';      end if;    end if;  end process;  W_FULL_O  <= (valid and not R_EN_I) or RST_I;  R_EMPTY_O <= not valid or RST_I;  proc_data : process (CLK_I) is    variable write_ok : std_logic;  begin    if rising_edge(CLK_I) then      if RST_I = '1' then        write_ok := '0';      else        write_ok := not valid or R_EN_I;      end if;      if (W_EN_I and write_ok) = '1' then        R_DATA_O <= W_DATA_I;      end if;    end if;  end process;  end architecture;

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?