minute.fit

有关数字钟的

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/03/2009 11:09:44      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "minute"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clk"                          : INPUT_PIN  = 39     ;
    "reset"                        : INPUT_PIN  = 38     ;
    "sethour"                      : INPUT_PIN  = 40     ;
    "daout0"                       : OUTPUT_PIN = 15     ;
    "daout1"                       : OUTPUT_PIN = 14     ;
    "daout2"                       : OUTPUT_PIN = 16     ;
    "daout3"                       : OUTPUT_PIN = 13     ;
    "daout4"                       : OUTPUT_PIN = 65     ;
    "daout5"                       : OUTPUT_PIN = 64     ;
    "daout6"                       : OUTPUT_PIN = 61     ;
    "daout7"                       : OUTPUT_PIN = 62     ;
    "enhour"                       : OUTPUT_PIN = 63     ;
    "|LPM_ADD_SUB:134|addcore:adder|:55" : LOCATION   = LC6_B6 ;
    ":4"                           : LOCATION   = LC3_B6 ;
    ":80"                          : LOCATION   = LC1_B14;  -- da13~153
    ":81"                          : LOCATION   = LC6_B14;  -- da12~153
    ":82"                          : LOCATION   = LC2_B14;  -- da11~153
    ":83"                          : LOCATION   = LC5_B14;  -- da10~153
    ":84"                          : LOCATION   = LC5_B6 ;  -- da23~155
    ":85"                          : LOCATION   = LC8_B6 ;  -- da22~155
    ":86"                          : LOCATION   = LC1_B6 ;  -- da21~155
    ":87"                          : LOCATION   = LC4_B6 ;  -- da20~155
    ":106"                         : LOCATION   = LC7_B14;
    ":135"                         : LOCATION   = LC2_B6 ;

END;

INTERNAL_INFO "minute"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC3_B6,->LC1_B14,->LC6_B14,->LC2_B14,->LC5_B14,->LC5_B6,->LC8_B6,->LC1_B6,->LC4_B6|";
    OD2P38  : LORAX = "1:FB2->LC3_B6,->LC1_B14,->LC6_B14,->LC2_B14,->LC5_B14,->LC5_B6,->LC8_B6,->LC1_B6,->LC4_B6|";
    OD3P40  : LORAX = "1:FB3|2:FH3R1,PA5R1C5->LC3_B6||";
    LC3_B6  : LORAX = "1:MSW3R1C4,HHL7R1->OH11R1P63|";
    LC1_B14 : LORAX = "1:MSW0R1C13,HHR23R1->OH0R1P13|";
    LC6_B14 : LORAX = "1:MSW6R1C12,HHR29R1->OH6R1P16|";
    LC2_B14 : LORAX = "1:MSW2R1C12,HHR3R1->OH2R1P14|";
    LC5_B14 : LORAX = "1:MSW4R1C13,HHR36R1->OH4R1P15|";
    LC5_B6  : LORAX = "1:MSW5R1C4,HHL42R1->OH13R1P62|";
    LC8_B6  : LORAX = "1:MSW7R1C5,G88R1->OH15R1P61|";
    LC1_B6  : LORAX = "1:MSW1R1C4,HHL5R1->OH9R1P64|";
    LC4_B6  : LORAX = "1:MSW0R1C4,HHL18R1->OH8R1P65|";
    LC7_B14 : LORAX = "1:MSW6R1C13,G53R1,PA7R1C5->LC3_B6,->LC5_B6,->LC8_B6,->LC1_B6,->LC4_B6|";
	LC6_B6  : LORAX2 = "X, X, LC4_B6, LC1_B6";
	LC3_B6  : LORAX2 = "OD3P40, LC7_B14, LC2_B6, LC3_B6";
	LC1_B14 : LORAX2 = "LC2_B14, LC1_B14, LC6_B14, LC5_B14";
	LC6_B14 : LORAX2 = "LC6_B14, LC1_B14, LC2_B14, LC5_B14";
	LC2_B14 : LORAX2 = "X, LC2_B14, LC1_B14, LC5_B14";
	LC5_B14 : LORAX2 = "X, X, LC7_B14, LC5_B14";
	LC5_B6  : LORAX2 = "X, X, LC7_B14, LC5_B6";
	LC8_B6  : LORAX2 = "LC7_B14, LC2_B6, LC6_B6, LC8_B6";
	LC1_B6  : LORAX2 = "LC7_B14, LC2_B6, LC1_B6, LC4_B6";
	LC4_B6  : LORAX2 = "X, LC7_B14, LC2_B6, LC4_B6";
	LC7_B14 : LORAX2 = "LC2_B14, LC1_B14, LC6_B14, LC5_B14";
	LC2_B6  : LORAX2 = "LC5_B6, LC4_B6, LC1_B6, LC8_B6";
END;