fpgd.fit

基于bpsk的vhdl语言编程与性能仿真

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 10/30/2008 08:59:18      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fpgd"
BEGIN

    DEVICE = "EPM7064LC44-7";

    "clk"                          : INPUT_PIN  = 43     ;
    "s"                            : INPUT_PIN  = 12     ; -- LC1
    "ab"                           : OUTPUT_PIN = 26     ; -- LC36
    "cs"                           : OUTPUT_PIN = 32     ; -- LC48
    "d0"                           : OUTPUT_PIN = 28     ; -- LC40
    "d1"                           : OUTPUT_PIN = 20     ; -- LC19
    "d2"                           : OUTPUT_PIN = 21     ; -- LC17
    "d3"                           : OUTPUT_PIN = 8      ; -- LC5
    "d4"                           : OUTPUT_PIN = 25     ; -- LC35
    "d5"                           : OUTPUT_PIN = 9      ; -- LC4
    "d6"                           : OUTPUT_PIN = 11     ; -- LC3
    "d7"                           : OUTPUT_PIN = 24     ; -- LC33
    "wr"                           : OUTPUT_PIN = 27     ; -- LC37
    "|ADDRESS:18|LPM_ADD_SUB:135|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC63   ;
    "|ADDRESS:18|LPM_ADD_SUB:135|addcore:adder|addcore:adder0|result_node6" : LOCATION   = LC62   ; -- PIN 40
    "|ADDRESS:18|LPM_ADD_SUB:135|addcore:adder|addcore:adder0|result_node7" : LOCATION   = LC61   ;
    "|ADDRESS:18|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC58   ;
    "|ADDRESS:18|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node6" : LOCATION   = LC56   ; -- PIN 38
    "|ADDRESS:18|LPM_ADD_SUB:186|addcore:adder|addcore:adder0|result_node7" : LOCATION   = LC55   ;
    "|ADDRESS:18|:9"               : LOCATION   = LC53   ; -- PIN 37  -- |ADDRESS:18|temp9
    "|ADDRESS:18|:10"              : LOCATION   = LC52   ; -- PIN 36  -- |ADDRESS:18|temp8
    "|ADDRESS:18|:11"              : LOCATION   = LC51   ; -- PIN 34  -- |ADDRESS:18|temp7
    "|ADDRESS:18|:12"              : LOCATION   = LC50   ;  -- |ADDRESS:18|temp6
    "|ADDRESS:18|:13"              : LOCATION   = LC54   ;  -- |ADDRESS:18|temp5
    "|ADDRESS:18|:14"              : LOCATION   = LC49   ; -- PIN 33  -- |ADDRESS:18|temp4
    "|ADDRESS:18|:15"              : LOCATION   = LC60   ;  -- |ADDRESS:18|temp3
    "|ADDRESS:18|:16"              : LOCATION   = LC59   ;  -- |ADDRESS:18|temp2
    "|ADDRESS:18|:17"              : LOCATION   = LC57   ; -- PIN 39  -- |ADDRESS:18|temp1
    "|ADDRESS:18|:18"              : LOCATION   = LC64   ; -- PIN 41  -- |ADDRESS:18|temp0
    "|AD:2|:5"                     : LOCATION   = LC39   ;  -- |AD:2|temp1
    "|AD:2|:6"                     : LOCATION   = LC27   ;  -- |AD:2|temp0
    "|FREQUE4:4|:3"                : LOCATION   = LC20   ; -- PIN 19  -- |FREQUE4:4|temp1
    "|FREQUE4:4|:4"                : LOCATION   = LC34   ;  -- |FREQUE4:4|temp0
    "|STORE:1|~2728~1"             : LOCATION   = LC38   ;
    "|STORE:1|~2917~1"             : LOCATION   = LC41   ; -- PIN 29
    "|STORE:1|~3106~1"             : LOCATION   = LC42   ;
    "|STORE:1|~3106~2"             : LOCATION   = LC43   ;
    "|STORE:1|~3295~1"             : LOCATION   = LC44   ;
    "|STORE:1|~3484~1"             : LOCATION   = LC45   ;
    "|STORE:1|~3673~1"             : LOCATION   = LC46   ; -- PIN 31
    "|STORE:1|~3862~1"             : LOCATION   = LC47   ;

END;

INTERNAL_INFO "fpgd"
BEGIN
	DEVICE = EPM7064LC44-7;
	LC33    : LORAX = "G58R0";
	LC37    : LORAX = "G25R0";
	LC36    : LORAX = "G61R0";
	LC48    : LORAX = "G77R0";
	LC40    : LORAX = "G28R0";
	LC19    : LORAX = "G56R0";
	LC17    : LORAX = "G54R0";
	LC5     : LORAX = "G50R0";
	LC35    : LORAX = "G60R0";
	LC4     : LORAX = "G20R0";
	LC3     : LORAX = "G19R0";
	LC53    : LORAX = "G62R0,PA16R0C0,PA16R0C1,PA16R0C2,PA16R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3,PA1R0C1,PA1R0C2,PA2R0C0";
	OH0R0P12 : LORAX = "G83R0,PA18R0C3";
	LC51    : LORAX = "G31R0,PA3R0C3,PA3R0C0,PA3R0C1,PA3R0C2";
	LC55    : LORAX = "G64R0,PA12R0C3";
	LC50    : LORAX = "G30R0,PA5R0C1,PA5R0C3,PA5R0C0,PA5R0C2";
	LC56    : LORAX = "G65R0,PA10R0C3";
	LC54    : LORAX = "G63R0,PA14R0C1,PA14R0C3,PA14R0C0,PA14R0C2";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC49    : LORAX = "G29R0,PA7R0C3,PA7R0C0,PA7R0C1,PA8R0C2";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC59    : LORAX = "G80R0,PA25R0C3";
	LC57    : LORAX = "G78R0,PA24R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC20    : LORAX = "G57R0,PA9R0C3";
	LC34    : LORAX = "G59R0,PA10R0C1";
	LC63    : LORAX = "G113R0,PA27R0C3";
	LC62    : LORAX = "G112R0,PA30R0C3";
	LC61    : LORAX = "G111R0,PA29R0C3";
	LC39    : LORAX = "G27R0,PA7R0C2";
	LC27    : LORAX = "G105R0,PA33R0C2";
	LC42    : LORAX = "G108R0,PA29R0C2";
	LC45    : LORAX = "G74R0,PA26R0C1";
	LC46    : LORAX = "G75R0,PA20R0C1";
	LC44    : LORAX = "G110R0,PA31R0C0";
	LC47    : LORAX = "G76R0,PA21R0C2";
	LC41    : LORAX = "G107R0,PA27R0C0";
	LC38    : LORAX = "G26R0,PA1R0C0";
	LC43    : LORAX = "G109R0,PA28R0C2";
END;