clk100_2.fit

在FPGA上

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 06/28/2007 12:11:08      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clk100_2"
BEGIN

    DEVICE = "EPM7032LC44-6";

    "clk_in"                       : INPUT_PIN  = 43     ;
    "reset"                        : INPUT_PIN  = 4      ; -- LC1
    "f1"                           : OUTPUT_PIN = 32     ; -- LC25
    "f500"                         : OUTPUT_PIN = 5      ; -- LC2
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC4    ; -- PIN 7
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC8    ; -- PIN 12
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node4" : LOCATION   = LC12   ; -- PIN 17
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC24   ; -- PIN 33
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node6" : LOCATION   = LC23   ; -- PIN 34
    "|lpm_add_sub:174|addcore:adder|addcore:adder0|result_node7" : LOCATION   = LC22   ; -- PIN 36
    "|lpm_add_sub:174|addcore:adder|addcore:adder1|result_node0" : LOCATION   = LC32   ; -- PIN 24
    "|lpm_add_sub:174|addcore:adder|addcore:adder1|result_node1" : LOCATION   = LC31   ; -- PIN 25
    ":146"                         : LOCATION   = LC30   ; -- PIN 26  -- c1009
    ":147"                         : LOCATION   = LC29   ; -- PIN 27  -- c1008
    ":148"                         : LOCATION   = LC28   ; -- PIN 28  -- c1007
    ":149"                         : LOCATION   = LC27   ; -- PIN 29  -- c1006
    ":150"                         : LOCATION   = LC26   ; -- PIN 31  -- c1005
    ":151"                         : LOCATION   = LC20   ; -- PIN 38  -- c1004
    ":152"                         : LOCATION   = LC19   ; -- PIN 39  -- c1003
    ":153"                         : LOCATION   = LC18   ; -- PIN 40  -- c1002
    ":154"                         : LOCATION   = LC17   ; -- PIN 41  -- c1001
    ":155"                         : LOCATION   = LC21   ; -- PIN 37  -- c1000

END;

INTERNAL_INFO "clk100_2"
BEGIN
	DEVICE = EPM7032LC44-6;
	LC25    : LORAX = "G38R0";
	LC2     : LORAX = "G10R0,PA1R0C0";
	OH0R0P4 : LORAX = "G43R0,PA20R0C0,PA20R0C1";
	LC30    : LORAX = "G56R0,PA30R0C1";
	LC29    : LORAX = "G55R0,PA27R0C1";
	LC28    : LORAX = "G41R0,PA22R0C1";
	LC27    : LORAX = "G40R0,PA19R0C1";
	LC26    : LORAX = "G39R0,PA21R0C1";
	LC18    : LORAX = "G14R0,PA5R0C0,PA5R0C1";
	LC17    : LORAX = "G13R0,PA7R0C0,PA7R0C1";
	LC19    : LORAX = "G15R0,PA3R0C0,PA3R0C1";
	LC21    : LORAX = "G30R0,PA16R0C0,PA16R0C1";
	LC20    : LORAX = "G16R0,PA2R0C0,PA2R0C1";
	LC12    : LORAX = "G37R0,PA26R0C1";
	LC8     : LORAX = "G29R0,PA9R0C1";
	LC4     : LORAX = "G12R0,PA0R0C1";
	LC24    : LORAX = "G33R0,PA10R0C1";
	LC23    : LORAX = "G32R0,PA12R0C1";
	LC22    : LORAX = "G31R0,PA14R0C1";
	LC32    : LORAX = "G58R0,PA29R0C1";
	LC31    : LORAX = "G57R0,PA28R0C1";
END;