jishuqi2.fit

在FPGA上

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 06/29/2007 10:44:47      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "jishuqi2"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clr"                          : INPUT_PIN  = 2      ;
    "reset"                        : INPUT_PIN  = 42     ;
    "up"                           : INPUT_PIN  = 1      ;
    "shuzi0"                       : OUTPUT_PIN = 66     ;
    "shuzi1"                       : OUTPUT_PIN = 67     ;
    "shuzi2"                       : OUTPUT_PIN = 65     ;
    "shuzi3"                       : OUTPUT_PIN = 64     ;
    "shuzi4"                       : OUTPUT_PIN = 21     ;
    "shuzi5"                       : OUTPUT_PIN = 24     ;
    "shuzi6"                       : OUTPUT_PIN = 22     ;
    "shuzi7"                       : OUTPUT_PIN = 25     ;
    ":16"                          : LOCATION   = LC1_B23;
    ":195"                         : LOCATION   = LC2_B23;
    ":234"                         : LOCATION   = LC4_B15;
    ":235"                         : LOCATION   = LC3_B15;
    ":236"                         : LOCATION   = LC2_B15;
    "~237~1"                       : LOCATION   = LC7_B23;
    ":238"                         : LOCATION   = LC4_B23;
    ":244"                         : LOCATION   = LC5_B23;  -- shuzil4
    ":245"                         : LOCATION   = LC7_B15;  -- shuzil3
    ":246"                         : LOCATION   = LC5_B15;  -- shuzil2
    ":247"                         : LOCATION   = LC1_B15;  -- shuzil1
    ":248"                         : LOCATION   = LC3_B23;  -- shuzil0
    ":295"                         : LOCATION   = LC6_B23;  -- clkb
    ":299"                         : LOCATION   = LC3_B5 ;
    ":513"                         : LOCATION   = LC8_B5 ;
    ":514"                         : LOCATION   = LC7_B5 ;
    ":517"                         : LOCATION   = LC5_B5 ;
    "~520~1"                       : LOCATION   = LC4_B5 ;
    ":528"                         : LOCATION   = LC8_B23;  -- shuzih3
    ":529"                         : LOCATION   = LC2_B5 ;  -- shuzih2
    ":530"                         : LOCATION   = LC6_B5 ;  -- shuzih1
    ":531"                         : LOCATION   = LC1_B5 ;  -- shuzih0

END;

INTERNAL_INFO "jishuqi2"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD1P2   : LORAX = "1:FB1->LC5_B23,->LC7_B15,->LC5_B15,->LC1_B15,->LC3_B23,->LC8_B23,->LC2_B5,->LC6_B5,->LC1_B5|2:FH1R1,PA20R1C22->LC6_B23,->LC5_B23,->LC3_B23,->LC8_B23||";
    OD3P42  : LORAX = "1:FB3|2:FH3R1|3:PA9R1C4->LC2_B5,->LC6_B5,->LC1_B5|,3:PA5R1C14->LC7_B15,->LC5_B15,->LC1_B15|,3:PA5R1C22->LC5_B23,->LC3_B23,->LC6_B23,->LC8_B23|||";
    OD4P1   : LORAX = "1:FB4->LC5_B23,->LC7_B15,->LC5_B15,->LC1_B15,->LC3_B23,->LC6_B23|";
    LC7_B15 : LORAX = "1:MSW6R1C15,HHR26R1->OH6R1P64|2:PA9R1C22->LC1_B23,->LC2_B23,->LC7_B23||";
    LC5_B15 : LORAX = "1:MSW4R1C14,HHR43R1->OH4R1P65|2:PA6R1C22->LC1_B23,->LC2_B23,->LC7_B23||";
    LC1_B15 : LORAX = "1:MSW0R1C14,HHR21R1->OH0R1P67|2:PA15R1C22->LC1_B23,->LC2_B23,->LC7_B23||";
    LC3_B23 : LORAX = "1:MSW2R1C22,HHR0R1->OH2R1P66|2:PA1R1C14->LC4_B15,->LC3_B15,->LC2_B15||";
    LC6_B23 : LORAX = "1:MSW5R1C23,G72R1,PA19R1C4->LC2_B5,->LC6_B5,->LC1_B5|";
    LC5_B5  : LORAX = "1:MSW4R1C4,G62R1,PA19R1C22->LC8_B23|";
    LC8_B23 : LORAX = "1:MSW7R1C22,G80R1->OH15R1P25|2:PA5R1C4->LC3_B5,->LC8_B5,->LC7_B5,->LC5_B5,->LC4_B5||";
    LC2_B5  : LORAX = "1:MSW1R1C4,G22R1->OH9R1P22|";
    LC6_B5  : LORAX = "1:MSW5R1C5,HHL39R1->OH13R1P24|";
    LC1_B5  : LORAX = "1:MSW0R1C4,HHL18R1->OH8R1P21|";
	LC1_B23 : LORAX2 = "LC1_B15, LC5_B15, LC7_B15, LC3_B23";
	LC2_B23 : LORAX2 = "LC5_B15, LC1_B15, LC3_B23, LC7_B15";
	LC4_B15 : LORAX2 = "LC1_B15, LC5_B15, LC7_B15, LC3_B23";
	LC3_B15 : LORAX2 = "LC1_B15, LC5_B15, LC7_B15, LC3_B23";
	LC2_B15 : LORAX2 = "X, LC1_B15, LC3_B23, LC7_B15";
	LC7_B23 : LORAX2 = "LC5_B15, LC1_B15, LC3_B23, LC7_B15";
	LC4_B23 : LORAX2 = "X, LC5_B23, LC2_B23, LC1_B23";
	LC5_B23 : LORAX2 = "OD3P42, X, X, LC4_B23";
	LC7_B15 : LORAX2 = "OD3P42, X, X, LC4_B15";
	LC5_B15 : LORAX2 = "OD3P42, X, X, LC3_B15";
	LC1_B15 : LORAX2 = "OD3P42, X, X, LC2_B15";
	LC3_B23 : LORAX2 = "OD3P42, X, LC7_B23, LC1_B23";
	LC6_B23 : LORAX2 = "OD1P2, OD3P42, LC5_B23, LC4_B23";
	LC3_B5  : LORAX2 = "LC6_B5, LC2_B5, LC8_B23, LC1_B5";
	LC8_B5  : LORAX2 = "LC2_B5, LC6_B5, LC8_B23, LC1_B5";
	LC7_B5  : LORAX2 = "X, LC6_B5, LC8_B23, LC1_B5";
	LC5_B5  : LORAX2 = "LC6_B5, LC2_B5, LC8_B23, LC1_B5";
	LC4_B5  : LORAX2 = "LC2_B5, LC6_B5, LC1_B5, LC8_B23";
	LC8_B23 : LORAX2 = "OD3P42, X, X, LC5_B5";
	LC2_B5  : LORAX2 = "OD3P42, X, LC3_B5, LC8_B5";
	LC6_B5  : LORAX2 = "OD3P42, X, LC3_B5, LC7_B5";
	LC1_B5  : LORAX2 = "OD3P42, X, LC4_B5, LC3_B5";
END;