lift.fit.talkback.xml

在QuartusII里用VHDL仿真实现电梯控制器

<!--
This XML file (created on Fri Apr 06 10:46:23 2007) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to license.txt.
-->
<talkback>
<ver>6.0</ver>
<schema>quartus_version_6.0_build_178.xsd</schema>
<license>
	<host_id>003018ae70dc</host_id>
	<nic_id>003018ae70dc</nic_id>
	<cdrive_id>081ccaa1</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>6.0</version>
	<build>Build 178</build>
	<binary_type>32</binary_type>
	<module>quartus_fit</module>
	<edition>Full Version</edition>
	<eval>Licensed</eval>
	<compilation_end_time>Fri Apr 06 10:46:23 2007</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">1607</cpu_freq>
	</cpu>
	<ram units="MB">447</ram>
</machine>
<project>D:/ALTERA/电梯控制/lift</project>
<revision>lift</revision>
<compilation_summary>
	<flow_status>Successful - Fri Apr 06 10:46:23 2007</flow_status>
	<quartus_ii_version>6.0 Build 178 04/27/2006 SJ Full Version</quartus_ii_version>
	<revision_name>lift</revision_name>
	<top_level_entity_name>threelift</top_level_entity_name>
	<family>MAX7000S</family>
	<device>EPM7128SLC84-6</device>
	<timing_models>Final</timing_models>
	<met_timing_requirements>N/A</met_timing_requirements>
	<total_macrocells>32 / 128 ( 25 % )</total_macrocells>
	<total_pins>27 / 68 ( 40 % )</total_pins>
</compilation_summary>
<resource_usage_summary>
	<rsc name="Logic cells" util="25" max=" 128 " type="int">32 </rsc>
	<rsc name="Registers" util="14" max=" 128 " type="int">18 </rsc>
	<rsc name="Number of pterms used" type="int">117</rsc>
	<rsc name="User inserted logic elements" type="int">0</rsc>
	<rsc name="I/O pins" util="40" max=" 68 " type="int">27 </rsc>
	<rsc name="-- Clock pins" util="100" max=" 2 " type="int">2 </rsc>
	<rsc name="-- Dedicated input pins" util="0" max=" 2 " type="int">0 </rsc>
	<rsc name="Global signals" type="int">2</rsc>
	<rsc name="Shareable expanders" util="3" max=" 128 " type="int">4 </rsc>
	<rsc name="Parallel expanders" util="9" max=" 120 " type="int">11 </rsc>
	<rsc name="Cells using turbo bit" util="25" max=" 128 " type="int">32 </rsc>
	<rsc name="Maximum fan-out node" type="text">threelift|mylift.state_bit_3</rsc>
	<rsc name="Maximum fan-out" type="int">22</rsc>
	<rsc name="Highest non-global fan-out signal" type="text">threelift|mylift.state_bit_3</rsc>
	<rsc name="Highest non-global fan-out" type="int">22</rsc>
	<rsc name="Total fan-out" type="int">291</rsc>
	<rsc name="Average fan-out" type="float">4.62</rsc>
</resource_usage_summary>
<control_signals>
	<row>
		<name>buttonclk</name>
		<location>PIN_83</location>
		<fan_out>6</fan_out>
		<usage>Clock</usage>
		<global>yes</global>
		<global_resource_used>On</global_resource_used>
	</row>
	<row>
		<name>liftclk</name>
		<location>PIN_2</location>
		<fan_out>12</fan_out>
		<usage>Clock</usage>
		<global>yes</global>
		<global_resource_used>On</global_resource_used>
	</row>
</control_signals>
<non_global_high_fan_out_signals>
	<row>
		<name>comb~7</name>
		<fan_out>10</fan_out>
	</row>
	<row>
		<name>comb~9</name>
		<fan_out>9</fan_out>
	</row>
	<row>
		<name>position[0]~reg0</name>
		<fan_out>18</fan_out>
	</row>
	<row>
		<name>position[1]~reg0</name>
		<fan_out>16</fan_out>
	</row>
	<row>
		<name>stoplight[1]~reg0</name>
		<fan_out>14</fan_out>
	</row>
	<row>
		<name>stoplight[2]~reg0</name>
		<fan_out>13</fan_out>
	</row>
	<row>
		<name>fuplight[2]~reg0</name>
		<fan_out>9</fan_out>
	</row>
	<row>
		<name>cleardn</name>
		<fan_out>6</fan_out>
	</row>
	<row>
		<name>fdnlight[3]~reg0</name>
		<fan_out>13</fan_out>
	</row>
	<row>
		<name>fdnlight[2]~reg0</name>
		<fan_out>10</fan_out>
	</row>
</non_global_high_fan_out_signals>
<interconnect_usage_summary>
	<rsc name="Output enables" util="0" max=" 6 " type="int">0 </rsc>
	<rsc name="PIA buffers" util="15" max=" 288 " type="int">44 </rsc>
	<rsc name="PIAs" util="15" max=" 288 " type="int">44 </rsc>
</interconnect_usage_summary>
<mep_data>
	<command_line>quartus_fit --read_settings_files=off --write_settings_files=off lift -c lift</command_line>
</mep_data>
<software_data>
	<smart_recompile>off</smart_recompile>
</software_data>
<messages>
	<info>Info: Quartus II Fitter was successful. 0 errors, 0 warnings</info>
	<info>Info: Elapsed time: 00:00:02</info>
	<info>Info: Processing ended: Fri Apr 06 10:46:23 2007</info>
	<info>Info: Selected device EPM7128SLC84-6 for design &quot;lift&quot;</info>
	<info>Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off lift -c lift</info>
</messages>
<fitter_settings>
	<row>
		<option>Device</option>
		<setting>EPM7128SLC84-6</setting>
	</row>
	<row>
		<option>Use smart compilation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Optimize IOC Register Placement for Timing</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Limit to One Fitting Attempt</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Fitter Initial Placement Seed</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>Slow Slew Rate</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Fitter Effort</option>
		<setting>Auto Fit</setting>
		<default_value>Auto Fit</default_value>
	</row>
</fitter_settings>
<fitter_device_options>
	<row>
		<option>Enable user-supplied start-up clock (CLKUSR)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable device-wide reset (DEV_CLRn)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable device-wide output enable (DEV_OE)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable INIT_DONE output</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Configuration scheme</option>
		<setting>Passive Serial</setting>
	</row>
	<row>
		<option>Reserve all unused pins</option>
		<setting>As output driving an unspecified signal</setting>
	</row>
	<row>
		<option>Security bit</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Base pin-out file on sameframe device</option>
		<setting>Off</setting>
	</row>
</fitter_device_options>
<input_pins>
	<row>
		<name>buttonclk</name>
		<pin__>83</pin__>
		<combinational_fan_out>6</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>yes</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>f1upbutton</name>
		<pin__>81</pin__>
		<lab>8</lab>
		<combinational_fan_out>2</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>f2dnbutton</name>
		<pin__>80</pin__>
		<lab>8</lab>
		<combinational_fan_out>2</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>f2upbutton</name>
		<pin__>33</pin__>
		<lab>4</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>f3dnbutton</name>
		<pin__>24</pin__>
		<lab>3</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>liftclk</name>
		<pin__>2</pin__>
		<combinational_fan_out>12</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>yes</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>reset</name>
		<pin__>4</pin__>
		<lab>1</lab>
		<combinational_fan_out>18</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>stop1button</name>
		<pin__>61</pin__>
		<lab>6</lab>
		<combinational_fan_out>2</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>stop2button</name>
		<pin__>60</pin__>
		<lab>6</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
	<row>
		<name>stop3button</name>
		<pin__>52</pin__>
		<lab>5</lab>
		<combinational_fan_out>0</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
	</row>
</input_pins>
<output_pins>
	<row>
		<name>doorlight</name>
		<pin__>31</pin__>
		<lab>3</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fdnlight[1]</name>
		<pin__>29</pin__>
		<lab>3</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fdnlight[2]</name>
		<pin__>16</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fdnlight[3]</name>
		<pin__>20</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fuplight[1]</name>
		<pin__>15</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fuplight[2]</name>
		<pin__>17</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>fuplight[3]</name>
		<pin__>30</pin__>
		<lab>3</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>position[0]</name>
		<pin__>21</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>position[1]</name>
		<pin__>5</pin__>
		<lab>1</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>stoplight[1]</name>
		<pin__>22</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>stoplight[2]</name>
		<pin__>18</pin__>
		<lab>2</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>stoplight[3]</name>
		<pin__>28</pin__>
		<lab>3</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
	<row>
		<name>udsig</name>
		<pin__>6</pin__>
		<lab>1</lab>
		<output_register>no</output_register>
		<slow_slew_rate>no</slow_slew_rate>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">10</load>
	</row>
</output_pins>
<files>
	<top>D:/ALTERA/电梯控制/threelift.vhd</top>
	<extensions>
		<ext ext_name="vhd">1</ext>
	</extensions>
	<sub_files>
		<sub_file>D:/ALTERA/电梯控制/threelift.vhd</sub_file>
	</sub_files>
</files>
<architecture>
	<family>MAX7000S</family>
	<auto_device>OFF</auto_device>
	<device>EPM7128SLC84-6</device>
</architecture>
<pkg_io>
	<pin_std count="27">TTL</pin_std>
</pkg_io>
</talkback>