📄 mcu8951.qsf
字号:
# Copyright (C) 1991-2004 Altera Corporation
# Any megafunction design, and related netlist (encrypted or decrypted),
# support information, device programming or simulation file, and any other
# associated documentation or information provided by Altera or a partner
# under Altera's Megafunction Partnership Program may be used only
# to program PLD devices (but not masked PLD devices) from Altera. Any
# other use of such megafunction design, netlist, support information,
# device programming or simulation file, or any other related documentation
# or information is prohibited for any other purpose, including, but not
# limited to modification, reverse engineering, de-compiling, or use with
# any other silicon devices, unless such use is explicitly licensed under
# a separate agreement with Altera or a megafunction partner. Title to the
# intellectual property, including patents, copyrights, trademarks, trade
# secrets, or maskworks, embodied in any such megafunction design, netlist,
# support information, device programming or simulation file, or any other
# related documentation or information provided by Altera or a megafunction
# partner, remains with Altera, the megafunction partner, or their respective
# licensors. No other licenses, including any licenses needed under any third
# party's intellectual property, are provided herein.
# The default values for assignments are stored in the file
# MCU8951_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
# assignment_defaults.qdf
# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.
# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 4.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "13:52:23 AUGUST 25, 2005"
set_global_assignment -name LAST_QUARTUS_VERSION "7.2 SP3"
set_global_assignment -name VHDL_FILE IRAM.VHD
set_global_assignment -name VHDL_FILE ROM4K.VHD
set_global_assignment -name VHDL_FILE reg8b.vhd
set_global_assignment -name VHDL_FILE ETESTER.VHD
set_global_assignment -name VHDL_FILE reg4b.vhd
# Pin & Location Assignments
# ==========================
# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name FAMILY "Cyclone II"
set_global_assignment -name TOP_LEVEL_ENTITY MCU8951
set_global_assignment -name AUTO_ENABLE_SMART_COMPILE on
# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EP2C5T144C8
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "AS OUTPUT DRIVING AN UNSPECIFIED SIGNAL"
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name WEAK_PULL_UP_RESISTOR OFF
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
# Assembler Assignments
# =====================
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE EPCS1
# SignalTap II Assignments
# ========================
set_global_assignment -name ENABLE_SIGNALTAP off
# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
set_parameter -name CYCLONEII_SAFE_WRITE "\"VERIFIED_SAFE\""
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_location_assignment PIN_17 -to CLK
set_location_assignment PIN_57 -to RST
set_location_assignment PIN_25 -to POE[0]
set_location_assignment PIN_26 -to POE[2]
set_location_assignment PIN_24 -to POE[3]
set_location_assignment PIN_28 -to POE[4]
set_global_assignment -name VHDL_FILE DECL7S.vhd
set_location_assignment PIN_21 -to MT
set_location_assignment PIN_22 -to NO
set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"
set_location_assignment PIN_142 -to COUT
set_location_assignment PIN_88 -to P0I[0]
set_location_assignment PIN_89 -to P0I[1]
set_location_assignment PIN_90 -to P0I[2]
set_location_assignment PIN_91 -to P0I[3]
set_location_assignment PIN_58 -to K2_P30
set_location_assignment PIN_40 -to P1O[0]
set_location_assignment PIN_32 -to P1O[1]
set_location_assignment PIN_31 -to P1O[2]
set_location_assignment PIN_30 -to P1O[3]
set_location_assignment PIN_27 -to P1O[4]
set_location_assignment PIN_43 -to P1O[5]
set_location_assignment PIN_42 -to P1O[6]
set_location_assignment PIN_41 -to P1O[7]
set_location_assignment PIN_55 -to LED[0]
set_location_assignment PIN_53 -to LED[1]
set_location_assignment PIN_52 -to LED[2]
set_location_assignment PIN_51 -to LED[3]
set_location_assignment PIN_48 -to LED[4]
set_location_assignment PIN_47 -to LED[5]
set_location_assignment PIN_45 -to LED[6]
set_location_assignment PIN_86 -to SPK
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -