texi.fit.eqn

在Quartus II 5.0环境下

--A1L563 is display~1949 at LC_X20_Y12_N9
--operation mode is normal

A1L563 = A1L523 & (displayselect & A1L562 # !displayselect & (licheng1[4])) # !A1L523 & A1L562 & (!displayselect);


--timewait2[4] is timewait2[4] at LC_X13_Y11_N3
--operation mode is normal

timewait2[4]_lut_out = A1L15 & (timewait2[4] $ (A1L304 & timewait2[3]));
timewait2[4] = DFFEAS(timewait2[4]_lut_out, GLOBAL(clktime), GLOBAL(clr), , A1L877, , , , );


--A1L11 is LessThan~2754 at LC_X16_Y12_N1
--operation mode is normal

A1L11 = A1L581 # A1L3 & A1L579 # !A1L3 & (A1L130);


--A1L589 is fee2~1643 at LC_X20_Y12_N7
--operation mode is normal

A1L589 = A1L585 & (A1L11 & !A1L583 & A1L584 # !A1L11 & A1L583);

--fee2[4] is fee2[4] at LC_X20_Y12_N7
--operation mode is normal

fee2[4] = DFFEAS(A1L589, GLOBAL(clkbase), VCC, , A1L43, , , , );


--temp4[3] is temp4[3] at LC_X14_Y14_N6
--operation mode is normal

temp4[3]_lut_out = A1L62 & (!A1L761 # !A1L762 # !A1L763);
temp4[3] = DFFEAS(temp4[3]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[1] is temp4[1] at LC_X13_Y15_N0
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

temp4[1]_lut_out = GND;
temp4[1] = DFFEAS(temp4[1]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, A1L65, , , VCC);


--temp4[2] is temp4[2] at LC_X13_Y15_N2
--operation mode is normal

temp4[2]_lut_out = A1L67;
temp4[2] = DFFEAS(temp4[2]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[4] is temp4[4] at LC_X13_Y15_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

temp4[4]_lut_out = GND;
temp4[4] = DFFEAS(temp4[4]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, A1L70, , , VCC);


--temp4[8] is temp4[8] at LC_X14_Y14_N5
--operation mode is normal

temp4[8]_lut_out = A1L73 & (!A1L761 # !A1L762 # !A1L763);
temp4[8] = DFFEAS(temp4[8]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[5] is temp4[5] at LC_X12_Y15_N4
--operation mode is normal

temp4[5]_lut_out = A1L76;
temp4[5] = DFFEAS(temp4[5]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[6] is temp4[6] at LC_X12_Y15_N5
--operation mode is normal

temp4[6]_lut_out = A1L79;
temp4[6] = DFFEAS(temp4[6]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[7] is temp4[7] at LC_X13_Y14_N9
--operation mode is normal

temp4[7]_lut_out = A1L81;
temp4[7] = DFFEAS(temp4[7]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[9] is temp4[9] at LC_X14_Y14_N4
--operation mode is normal

temp4[9]_lut_out = A1L84 & (!A1L761 # !A1L762 # !A1L763);
temp4[9] = DFFEAS(temp4[9]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[10] is temp4[10] at LC_X14_Y14_N8
--operation mode is normal

temp4[10]_lut_out = A1L87 & (!A1L763 # !A1L762 # !A1L761);
temp4[10] = DFFEAS(temp4[10]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--temp4[11] is temp4[11] at LC_X13_Y14_N7
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

temp4[11]_lut_out = GND;
temp4[11] = DFFEAS(temp4[11]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, A1L90, , , VCC);


--temp4[12] is temp4[12] at LC_X13_Y14_N8
--operation mode is normal

temp4[12]_lut_out = A1L92;
temp4[12] = DFFEAS(temp4[12]_lut_out, GLOBAL(clkbase), GLOBAL(clr), , en, , , , );


--A1L204 is add~9430 at LC_X13_Y12_N5
--operation mode is arithmetic

A1L204 = timewait3[1] $ !A1L759;

--A1L205 is add~9432 at LC_X13_Y12_N5
--operation mode is arithmetic

A1L205_cout_0 = timewait3[1] & !A1L759;
A1L205 = CARRY(A1L205_cout_0);

--A1L206 is add~9432COUT1_9869 at LC_X13_Y12_N5
--operation mode is arithmetic

A1L206_cout_1 = timewait3[1] & !A1L759;
A1L206 = CARRY(A1L206_cout_1);


--A1L207 is add~9435 at LC_X13_Y12_N6
--operation mode is arithmetic

A1L207 = timewait3[2] $ (A1L205);

--A1L208 is add~9437 at LC_X13_Y12_N6
--operation mode is arithmetic

A1L208_cout_0 = !A1L205 # !timewait3[2];
A1L208 = CARRY(A1L208_cout_0);

--A1L209 is add~9437COUT1 at LC_X13_Y12_N6
--operation mode is arithmetic

A1L209_cout_1 = !A1L206 # !timewait3[2];
A1L209 = CARRY(A1L209_cout_1);


--A1L210 is add~9440 at LC_X13_Y12_N7
--operation mode is arithmetic

A1L210 = timewait3[3] $ (!A1L208);

--A1L211 is add~9442 at LC_X13_Y12_N7
--operation mode is arithmetic

A1L211_cout_0 = timewait3[3] & (!A1L208);
A1L211 = CARRY(A1L211_cout_0);

--A1L212 is add~9442COUT1_9870 at LC_X13_Y12_N7
--operation mode is arithmetic

A1L212_cout_1 = timewait3[3] & (!A1L209);
A1L212 = CARRY(A1L212_cout_1);


--A1L213 is add~9445 at LC_X13_Y12_N8
--operation mode is normal

A1L213 = timewait3[4] $ A1L211;


--clktime is clktime at LC_X9_Y10_N9
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

clktime_lut_out = GND;
clktime = DFFEAS(clktime_lut_out, GLOBAL(clkbase), VCC, , , clktimecount[5], , , VCC);


--A1L877 is timewait3[1]~11 at LC_X12_Y12_N2
--operation mode is normal

A1L877 = !start & (en);


--A1L12 is LessThan~2756 at LC_X20_Y11_N4
--operation mode is normal

A1L12 = licheng1[3] & !licheng1[4] & (licheng1[2] # licheng1[1]) # !licheng1[3] & licheng1[4] & (!licheng1[1] # !licheng1[2]);


--A1L765 is rtl~1130 at LC_X21_Y13_N7
--operation mode is normal

A1L765 = licheng2[3] # licheng2[2] & (licheng2[1] # A1L12) # !licheng2[2] & (!A1L12 # !licheng2[1]);


--A1L214 is add~9450 at LC_X21_Y13_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

licheng2[2]_qfbk = licheng2[2];
A1L214 = licheng2[1] & licheng2[2]_qfbk & A1L12;

--licheng2[2] is licheng2[2] at LC_X21_Y13_N3
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

licheng2[2] = DFFEAS(A1L214, GLOBAL(speed), GLOBAL(clr), , A1L726, A1L735, , , VCC);


--A1L756 is rtl~3 at LC_X21_Y13_N8
--operation mode is normal

A1L756 = A1L765 # licheng2[4] $ (!A1L214 # !licheng2[3]);


--A1L215 is add~9451 at LC_X21_Y13_N9
--operation mode is normal

A1L215 = licheng2[4] $ (licheng2[3] & (A1L214));


--A1L216 is add~9452 at LC_X19_Y13_N2
--operation mode is normal

A1L216 = A1L215 & (licheng3[1] & !A1L765);


--A1L766 is rtl~1131 at LC_X19_Y13_N4
--operation mode is normal

A1L766 = licheng3[3] # A1L216 $ !licheng3[2] # !licheng3[4];


--A1L217 is add~9453 at LC_X19_Y13_N3
--operation mode is normal

A1L217 = licheng4[1] & !A1L766 & (licheng3[1] $ A1L756);


--A1L218 is add~9454 at LC_X19_Y15_N7
--operation mode is normal

A1L218 = licheng4[4] $ (A1L217 & licheng4[3] & licheng4[2]);


--A1L219 is add~9455 at LC_X19_Y15_N4
--operation mode is normal

A1L219 = A1L217 $ (licheng4[2]);


--A1L220 is add~9456 at LC_X19_Y13_N9
--operation mode is normal

A1L220 = licheng4[1] $ (A1L766 # licheng3[1] $ !A1L756);


--A1L221 is add~9457 at LC_X19_Y15_N2
--operation mode is normal

licheng4[3]_qfbk = licheng4[3];
A1L221 = licheng4[3]_qfbk $ (A1L217 & licheng4[2]);

--licheng4[3] is licheng4[3] at LC_X19_Y15_N2
--operation mode is normal

licheng4[3] = DFFEAS(A1L221, GLOBAL(speed), GLOBAL(clr), , A1L726, , , , );


--A1L767 is rtl~1132 at LC_X19_Y15_N6
--operation mode is normal

A1L767 = A1L220 & A1L219 & A1L218 & !A1L221;


--speed is speed at LC_X8_Y10_N5
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

speed_lut_out = GND;
speed = DFFEAS(speed_lut_out, GLOBAL(clkbase), VCC, , , speedcount[2], , , VCC);


--A1L222 is add~9458 at LC_X12_Y13_N8
--operation mode is normal

A1L222_carry_eqn = (!A1L236 & A1L246) # (A1L236 & A1L247);
A1L222 = A1L222_carry_eqn $ !timecount3[9];


--A1L223 is add~9463 at LC_X12_Y13_N2
--operation mode is arithmetic

A1L223 = timecount3[3] $ !A1L230;

--A1L224 is add~9465 at LC_X12_Y13_N2
--operation mode is arithmetic

A1L224_cout_0 = timecount3[3] & !A1L230;
A1L224 = CARRY(A1L224_cout_0);

--A1L225 is add~9465COUT1_9873 at LC_X12_Y13_N2
--operation mode is arithmetic

A1L225_cout_1 = timecount3[3] & !A1L231;
A1L225 = CARRY(A1L225_cout_1);


--A1L226 is add~9468 at LC_X12_Y13_N0
--operation mode is arithmetic

A1L226 = !timecount3[1];

--A1L227 is add~9470 at LC_X12_Y13_N0
--operation mode is arithmetic

A1L227_cout_0 = timecount3[1];
A1L227 = CARRY(A1L227_cout_0);

--A1L228 is add~9470COUT1_9871 at LC_X12_Y13_N0
--operation mode is arithmetic

A1L228_cout_1 = timecount3[1];
A1L228 = CARRY(A1L228_cout_1);


--A1L229 is add~9473 at LC_X12_Y13_N1
--operation mode is arithmetic

A1L229 = timecount3[2] $ (A1L227);

--A1L230 is add~9475 at LC_X12_Y13_N1
--operation mode is arithmetic

A1L230_cout_0 = !A1L227 # !timecount3[2];
A1L230 = CARRY(A1L230_cout_0);

--A1L231 is add~9475COUT1_9872 at LC_X12_Y13_N1
--operation mode is arithmetic

A1L231_cout_1 = !A1L228 # !timecount3[2];
A1L231 = CARRY(A1L231_cout_1);


--A1L232 is add~9478 at LC_X12_Y13_N3
--operation mode is arithmetic

A1L232 = timecount3[4] $ A1L224;

--A1L233 is add~9480 at LC_X12_Y13_N3
--operation mode is arithmetic

A1L233_cout_0 = !A1L224 # !timecount3[4];
A1L233 = CARRY(A1L233_cout_0);

--A1L234 is add~9480COUT1 at LC_X12_Y13_N3
--operation mode is arithmetic

A1L234_cout_1 = !A1L225 # !timecount3[4];
A1L234 = CARRY(A1L234_cout_1);


--A1L768 is rtl~1133 at LC_X11_Y13_N9
--operation mode is normal

A1L768 = !A1L229 & !A1L226 & A1L223 & !A1L232;


--A1L235 is add~9483 at LC_X12_Y13_N4
--operation mode is arithmetic

A1L235 = timecount3[5] $ !A1L233;

--A1L236 is add~9485 at LC_X12_Y13_N4
--operation mode is arithmetic

A1L236 = A1L237;


--A1L239 is add~9488 at LC_X12_Y13_N5
--operation mode is arithmetic

A1L239_carry_eqn = (!A1L236 & GND) # (A1L236 & VCC);
A1L239 = timecount3[6] $ A1L239_carry_eqn;

--A1L240 is add~9490 at LC_X12_Y13_N5
--operation mode is arithmetic

A1L240_cout_0 = !A1L236 # !timecount3[6];
A1L240 = CARRY(A1L240_cout_0);

--A1L241 is add~9490COUT1_9874 at LC_X12_Y13_N5
--operation mode is arithmetic

A1L241_cout_1 = !A1L236 # !timecount3[6];
A1L241 = CARRY(A1L241_cout_1);


--A1L242 is add~9493 at LC_X12_Y13_N6
--operation mode is arithmetic

A1L242_carry_eqn = (!A1L236 & A1L240) # (A1L236 & A1L241);
A1L242 = timecount3[7] $ (!A1L242_carry_eqn);

--A1L243 is add~9495 at LC_X12_Y13_N6
--operation mode is arithmetic

A1L243_cout_0 = timecount3[7] & (!A1L240);
A1L243 = CARRY(A1L243_cout_0);

--A1L244 is add~9495COUT1_9875 at LC_X12_Y13_N6
--operation mode is arithmetic

A1L244_cout_1 = timecount3[7] & (!A1L241);
A1L244 = CARRY(A1L244_cout_1);


--A1L245 is add~9498 at LC_X12_Y13_N7
--operation mode is arithmetic

A1L245_carry_eqn = (!A1L236 & A1L243) # (A1L236 & A1L244);
A1L245 = timecount3[8] $ A1L245_carry_eqn;

--A1L246 is add~9500 at LC_X12_Y13_N7
--operation mode is arithmetic

A1L246_cout_0 = !A1L243 # !timecount3[8];
A1L246 = CARRY(A1L246_cout_0);

--A1L247 is add~9500COUT1_9876 at LC_X12_Y13_N7
--operation mode is arithmetic

A1L247_cout_1 = !A1L244 # !timecount3[8];
A1L247 = CARRY(A1L247_cout_1);


--A1L769 is rtl~1134 at LC_X11_Y13_N2
--operation mode is normal

A1L769 = A1L245 & A1L235 & A1L239 & A1L242;


--A1L726 is licheng1[1]~243 at LC_X12_Y12_N4
--operation mode is normal

A1L726 = A1L222 & A1L769 & A1L768 & A1L468;


--A1L249 is add~9505 at LC_X20_Y14_N5
--operation mode is arithmetic

A1L249_cout_0 = A1L173;
A1L249 = CARRY(A1L249_cout_0);

--A1L250 is add~9505COUT1_9877 at LC_X20_Y14_N5
--operation mode is arithmetic

A1L250_cout_1 = A1L173;
A1L250 = CARRY(A1L250_cout_1);


--fee23[3] is fee23[3] at LC_X22_Y15_N8
--operation mode is normal

fee23[3]_lut_out = A1L16 & (fee23[3] $ (fee23[2] & A1L362));
fee23[3] = DFFEAS(fee23[3]_lut_out, GLOBAL(clktime), GLOBAL(clr), , A1L877, , , , );


--fee13[3] is fee13[3] at LC_X23_Y15_N7
--operation mode is normal

fee13[3]_lut_out = A1L13 & (fee13[3] $ (A1L373 & fee13[2]));
fee13[3] = DFFEAS(fee13[3]_lut_out, GLOBAL(speed), GLOBAL(clr), , A1L646, , , , );


--A1L251 is add~9508 at LC_X23_Y11_N4
--operation mode is normal

A1L251 = feepksave1[5] $ (A1L253 $ !fee11[5]);


--A1L252 is add~9513 at LC_X23_Y11_N3
--operation mode is arithmetic

A1L252 = fee11[4] $ feepksave1[4] $ A1L269;

--A1L253 is add~9515 at LC_X23_Y11_N3
--operation mode is arithmetic

A1L253_cout_0 = fee11[4] & !feepksave1[4] & !A1L269 # !fee11[4] & (!A1L269 # !feepksave1[4]);
A1L253 = CARRY(A1L253_cout_0);

--A1L254 is add~9515COUT1_9890 at LC_X23_Y11_N3
--operation mode is arithmetic

A1L254_cout_1 = fee11[4] & !feepksave1[4] & !A1L270 # !fee11[4] & (!A1L270 # !