counter16.fit.qmsg

利用VHDL编写的一个简单的16位计数器

{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X14_Y0 X28_Y14 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X14_Y0 to location X28_Y14" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "16 " "Warning: Found 16 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[0\] 0 " "Info: Pin \"Q\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[1\] 0 " "Info: Pin \"Q\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[2\] 0 " "Info: Pin \"Q\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[3\] 0 " "Info: Pin \"Q\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[4\] 0 " "Info: Pin \"Q\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[5\] 0 " "Info: Pin \"Q\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[6\] 0 " "Info: Pin \"Q\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[7\] 0 " "Info: Pin \"Q\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[8\] 0 " "Info: Pin \"Q\[8\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[9\] 0 " "Info: Pin \"Q\[9\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[10\] 0 " "Info: Pin \"Q\[10\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[11\] 0 " "Info: Pin \"Q\[11\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[12\] 0 " "Info: Pin \"Q\[12\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[13\] 0 " "Info: Pin \"Q\[13\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[14\] 0 " "Info: Pin \"Q\[14\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "Q\[15\] 0 " "Info: Pin \"Q\[15\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "16 " "Warning: Following 16 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[0\] GND " "Info: Pin Q\[0\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[0] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[1\] GND " "Info: Pin Q\[1\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[1] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[2\] GND " "Info: Pin Q\[2\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[2] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[3\] GND " "Info: Pin Q\[3\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[3] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[4\] GND " "Info: Pin Q\[4\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[4] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[5\] GND " "Info: Pin Q\[5\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[5] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[6\] GND " "Info: Pin Q\[6\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[6] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[7\] GND " "Info: Pin Q\[7\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[7] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[8\] GND " "Info: Pin Q\[8\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[8] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[8] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[9\] GND " "Info: Pin Q\[9\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[9] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[9] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[10\] GND " "Info: Pin Q\[10\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[10] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[10] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[11\] GND " "Info: Pin Q\[11\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[11] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[11] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[12\] GND " "Info: Pin Q\[12\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[12] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[12] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[13\] GND " "Info: Pin Q\[13\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[13] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[13] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[14\] GND " "Info: Pin Q\[14\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[14] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[14] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q\[15\] GND " "Info: Pin Q\[15\] has GND driving its datain port" {  } { { "d:/eda/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/quartus/bin/pin_planner.ppl" { Q[15] } } } { "counter16.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/jian/counter16.vhd" 9 -1 0 } } { "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q[15] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "C:/Documents and Settings/Administrator/桌面/jian/counter16.fit.smsg " "Info: Generated suppressed messages file C:/Documents and Settings/Administrator/桌面/jian/counter16.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0 0}
{ "Info" "IQCU_PARALLEL_USED" "1.0 2 2 " "Info: Parallel compilation was enabled and used an average of 1.0 processors and a maximum of 2 processors out of 2 processors allowed" { { "Info" "IQCU_PARALLEL_INSIGNIFICANT_TIME" "" "Info: Less than 1% of process time was spent using more than one processor" {  } {  } 0 0 "Less than 1%% of process time was spent using more than one processor" 0 0 "" 0 0}  } {  } 0 0 "Parallel compilation was enabled and used an average of %1!s! processors and a maximum of %2!i! processors out of %3!i! processors allowed" 0 0 "" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 4 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 4 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "181 " "Info: Peak virtual memory: 181 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Wed Apr 01 16:04:19 2009 " "Info: Processing ended: Wed Apr 01 16:04:19 2009" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Info: Elapsed time: 00:00:05" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Info: Total CPU time (on all processors): 00:00:03" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 0}