📄 p1.lst
字号:
(0029)
(0030)
(0031) export NO_SHADOW
(0032) export _NO_SHADOW
(0033)
(0034) FLAG_CFG_MASK: equ 10h ;M8C flag register REG address bit mask
(0035) END_CONFIG_TABLE: equ ffh ;end of config table indicator
(0036)
(0037) AREA psoc_config(rom, rel)
(0038)
(0039)
(0040) ;---------------------------------------------------------------------------
(0041) ; LoadConfigInit - Establish the start-up configuration (except for a few
(0042) ; parameters handled by boot code, like CPU speed). This
(0043) ; function can be called from user code, but typically it
(0044) ; is only called from boot.
(0045) ;
(0046) ; INPUTS: None.
(0047) ; RETURNS: Nothing.
(0048) ; SIDE EFFECTS: Registers are volatile: the A and X registers can be modified!
(0049) ; In the large memory model currently only the page
(0050) ; pointer registers listed below are modified. This does
(0051) ; not guarantee that in future implementations of this
(0052) ; function other page pointer registers will not be
(0053) ; modified.
(0054) ;
(0055) ; Page Pointer Registers Modified:
(0056) ; CUR_PP
(0057) ;
(0058) _LoadConfigInit:
(0059) LoadConfigInit:
(0060) RAM_PROLOGUE RAM_USE_CLASS_4
(0061)
(0062) mov [Port_1_Data_SHADE], 0h
0242: 55 1B 00 MOV [27],0
(0063)
(0064) lcall LoadConfig_p1
0245: 7C 02 49 LCALL 0x0249
(0065)
(0066) RAM_EPILOGUE RAM_USE_CLASS_4
(0067) ret
0248: 7F RET
(0068)
(0069) ;---------------------------------------------------------------------------
(0070) ; Load Configuration p1
(0071) ;
(0072) ; Load configuration registers for p1.
(0073) ; IO Bank 0 registers a loaded first,then those in IO Bank 1.
(0074) ;
(0075) ; INPUTS: None.
(0076) ; RETURNS: Nothing.
(0077) ; SIDE EFFECTS: Registers are volatile: the CPU A and X registers may be
(0078) ; modified as may the Page Pointer registers!
(0079) ; In the large memory model currently only the page
(0080) ; pointer registers listed below are modified. This does
(0081) ; not guarantee that in future implementations of this
(0082) ; function other page pointer registers will not be
(0083) ; modified.
(0084) ;
(0085) ; Page Pointer Registers Modified:
(0086) ; CUR_PP
(0087) ;
(0088) _LoadConfig_p1:
(0089) LoadConfig_p1:
(0090) RAM_PROLOGUE RAM_USE_CLASS_4
(0091) lcall LoadConfigTBL_p1 ; Call load config table routine
0249: 7C 01 EA LCALL 0x01EA
(0092)
(0093)
(0094) RAM_EPILOGUE RAM_USE_CLASS_4
(0095) ret
024C: 7F RET
024D: 30 HALT
FILE: .\debug.asm
(0001) export debug_glimpse
(0002) export _debug_glimpse
(0003) export debug_turn_on_led
(0004) export _debug_turn_on_led
(0005) export debug_turn_off_led
(0006) export _debug_turn_off_led
(0007) export DELAY_SHORT_TIME
(0008) export _DELAY_SHORT_TIME
(0009)
(0010) include "memory.inc"
(0011) INCLUDE "m8c.inc"
(0012) area UserModules (ROM, REL)
(0013)
(0014) EXPORT TIME_TEMP
(0015) TIME_TEMP: BLK 1 ;Receive temp when using SPIS
(0016)
(0017) .SECTION
(0018) ;-----------------------------------------------------------------------------
(0019) ; FUNCTION NAME: glimpse
(0020) ;
(0021) ; DESCRIPTION:
(0022) ; used in debug for the LED light
(0023) ;-----------------------------------------------------------------------------
(0024) debug_glimpse:
(0025) _debug_glimpse:
(0026) RAM_PROLOGUE RAM_USE_CLASS_1
(0027) MOV REG[08H],01H
024E: 62 08 01 MOV REG[8],1
(0028) MOV REG[P0DATA],F7H
0251: 62 00 F7 MOV REG[0],247
(0029) call DELAY_SHORT_TIME
0254: 90 5F CALL 0x02B5
(0030) call DELAY_SHORT_TIME
0256: 90 5D CALL 0x02B5
(0031) call DELAY_SHORT_TIME
0258: 90 5B CALL 0x02B5
(0032)
(0033) MOV REG[P0DATA],08H
025A: 62 00 08 MOV REG[0],8
(0034) call DELAY_SHORT_TIME
025D: 90 56 CALL 0x02B5
(0035) call DELAY_SHORT_TIME
025F: 90 54 CALL 0x02B5
(0036) call DELAY_SHORT_TIME
0261: 90 52 CALL 0x02B5
(0037)
(0038) MOV REG[P0DATA],F7H
0263: 62 00 F7 MOV REG[0],247
(0039) call DELAY_SHORT_TIME
0266: 90 4D CALL 0x02B5
(0040) call DELAY_SHORT_TIME
0268: 90 4B CALL 0x02B5
(0041) call DELAY_SHORT_TIME
026A: 90 49 CALL 0x02B5
(0042)
(0043) MOV REG[P0DATA],08H
026C: 62 00 08 MOV REG[0],8
(0044) call DELAY_SHORT_TIME
026F: 90 44 CALL 0x02B5
(0045) call DELAY_SHORT_TIME
0271: 90 42 CALL 0x02B5
(0046) call DELAY_SHORT_TIME
0273: 90 40 CALL 0x02B5
(0047)
(0048) MOV REG[P0DATA],F7H
0275: 62 00 F7 MOV REG[0],247
(0049) call DELAY_SHORT_TIME
0278: 90 3B CALL 0x02B5
(0050) call DELAY_SHORT_TIME
027A: 90 39 CALL 0x02B5
(0051) call DELAY_SHORT_TIME
027C: 90 37 CALL 0x02B5
(0052)
(0053) MOV REG[P0DATA],08H
027E: 62 00 08 MOV REG[0],8
(0054) call DELAY_SHORT_TIME
0281: 90 32 CALL 0x02B5
(0055) call DELAY_SHORT_TIME
0283: 90 30 CALL 0x02B5
(0056) call DELAY_SHORT_TIME
0285: 90 2E CALL 0x02B5
(0057)
(0058) MOV REG[P0DATA],F7H
0287: 62 00 F7 MOV REG[0],247
(0059) call DELAY_SHORT_TIME
028A: 90 29 CALL 0x02B5
(0060) call DELAY_SHORT_TIME
028C: 90 27 CALL 0x02B5
(0061) call DELAY_SHORT_TIME
028E: 90 25 CALL 0x02B5
(0062)
(0063) MOV REG[P0DATA],08H
0290: 62 00 08 MOV REG[0],8
(0064) call DELAY_SHORT_TIME
0293: 90 20 CALL 0x02B5
(0065) call DELAY_SHORT_TIME
0295: 90 1E CALL 0x02B5
(0066) call DELAY_SHORT_TIME
0297: 90 1C CALL 0x02B5
(0067)
(0068) MOV REG[P0DATA],F7H
0299: 62 00 F7 MOV REG[0],247
(0069) call DELAY_SHORT_TIME
029C: 90 17 CALL 0x02B5
(0070) call DELAY_SHORT_TIME
029E: 90 15 CALL 0x02B5
(0071) call DELAY_SHORT_TIME
02A0: 90 13 CALL 0x02B5
(0072)
(0073) MOV REG[P0DATA],08H
02A2: 62 00 08 MOV REG[0],8
(0074) call DELAY_SHORT_TIME
02A5: 90 0E CALL 0x02B5
(0075) call DELAY_SHORT_TIME
02A7: 90 0C CALL 0x02B5
(0076) call DELAY_SHORT_TIME
02A9: 90 0A CALL 0x02B5
(0077)
(0078) MOV REG[P0DATA],F7H
02AB: 62 00 F7 MOV REG[0],247
(0079) call DELAY_SHORT_TIME
02AE: 90 05 CALL 0x02B5
(0080) call DELAY_SHORT_TIME
02B0: 90 03 CALL 0x02B5
(0081) call DELAY_SHORT_TIME
02B2: 90 01 CALL 0x02B5
(0082) RAM_EPILOGUE RAM_USE_CLASS_1
(0083) RET
02B4: 7F RET
(0084) .ENDSECTION
(0085)
(0086)
(0087) .SECTION
(0088) ;-----------------------------------------------------------------------------
(0089) ; FUNCTION NAME: DELAY_SHORT_TIME
(0090) ;
(0091) ; DESCRIPTION:
(0092) ; used in debug for the LED light for delay
(0093) ;-----------------------------------------------------------------------------
(0094) DELAY_SHORT_TIME:
(0095) _DELAY_SHORT_TIME:
(0096) RAM_PROLOGUE RAM_USE_CLASS_1
(0097)
(0098) MOV [TIME_TEMP],FFH
02B5: 55 4D FF MOV [delay_counter+1],255
(0099) LOOP_TIME1:
(0100) MOV A,FFH
02B8: 50 FF MOV A,255
(0101) LOOP_TIME2:
(0102) NOP
02BA: 40 NOP
(0103) NOP
02BB: 40 NOP
(0104) NOP
02BC: 40 NOP
(0105) NOP
02BD: 40 NOP
(0106) NOP
02BE: 40 NOP
(0107) DEC A
02BF: 78 DEC A
(0108) cmp A, 00h
02C0: 39 00 CMP A,0
(0109) JNZ LOOP_TIME2
02C2: BF F7 JNZ 0x02BA
(0110) DEC [TIME_TEMP]
02C4: 7A 4D DEC [delay_counter+1]
(0111) MOV A,[TIME_TEMP]
02C6: 51 4D MOV A,[delay_counter+1]
(0112) CMP A,00H
02C8: 39 00 CMP A,0
(0113) JNZ LOOP_TIME1
02CA: BF ED JNZ 0x02B8
(0114) RAM_EPILOGUE RAM_USE_CLASS_1
(0115) RET
02CC: 7F RET
(0116) .ENDSECTION
(0117)
(0118) .SECTION
(0119) ;-----------------------------------------------------------------------------
(0120) ; FUNCTION NAME: turn_on_led
(0121) ;
(0122) ; DESCRIPTION:
(0123) ; used in debug for the LED light
(0124) ;-----------------------------------------------------------------------------
(0125) debug_turn_on_led:
(0126) _debug_turn_on_led:
(0127) RAM_PROLOGUE RAM_USE_CLASS_1
(0128) MOV REG[08H],01H
02CD: 62 08 01 MOV REG[8],1
(0129) MOV REG[P0DATA],F7H
02D0: 62 00 F7 MOV REG[0],247
(0130) RAM_EPILOGUE RAM_USE_CLASS_1
(0131) RET
02D3: 7F RET
(0132) .ENDSECTION
(0133)
(0134) .SECTION
(0135) ;-----------------------------------------------------------------------------
(0136) ; FUNCTION NAME: turn_off_led
(0137) ;
(0138) ; DESCRIPTION:
(0139) ; used in debug for the LED light
(0140) ;-----------------------------------------------------------------------------
(0141) debug_turn_off_led:
(0142) _debug_turn_off_led:
(0143) RAM_PROLOGUE RAM_USE_CLASS_1
(0144) MOV REG[08H],01H
02D4: 62 08 01 MOV REG[8],1
(0145) MOV REG[P0DATA],08H
02D7: 62 00 08 MOV REG[0],8
(0146) RAM_EPILOGUE RAM_USE_CLASS_1
(0147) RET
02DA: 7F RET
FILE: .\int_func.asm
(0001) ;;*****************************************************************************
(0002) ;;*****************************************************************************
(0003) ;; FILENAME: int_func.asm
(0004) ;;-----------------------------------------------------------------------------
(0005) ;;*****************************************************************************
(0006) ;;*****************************************************************************
(0007)
(0008) include "m8c.inc"
(0009) include "memory.inc"
(0010) ;include "int_func.inc"
(0011)
(0012) ;-----------------------------------------------
(0013) ; Global Symbols
(0014) ;-----------------------------------------------
(0015) export int0_initialize
(0016) export _int0_initialize
(0017) export int1_initialize
(0018) export _int1_initialize
(0019)
(0020) export SET_INT0_NEW
(0021) export _SET_INT0_NEW
(0022)
(0023) export GET_INT0_NEW
(0024) export _GET_INT0_NEW
(0025)
(0026) export SET_INT1_NEW
(0027) export _SET_INT1_NEW
(0028)
(0029) export GET_INT1_NEW
(0030) export _GET_INT1_NEW
(0031)
(0032) export INT1_GET_BUTT
(0033) export _INT1_GET_BUTT
(0034) export INT1_GET_X
(0035) export _INT1_GET_X
(0036) export INT1_GET_Y
(0037) export _INT1_GET_Y
(0038) export INT1_GET_Z
(0039) export _INT1_GET_Z
(0040)
(0041) export INT0_GET_DATA_KB_00
(0042) export _INT0_GET_DATA_KB_00
(0043) export INT0_GET_DATA_KB_01
(0044) export _INT0_GET_DATA_KB_01
(0045) export INT0_GET_DATA_KB_02
(0046) export _INT0_GET_DATA_KB_02
(0047) export INT0_GET_DATA_KB_03
(0048) export _INT0_GET_DATA_KB_03
(0049) export INT0_GET_DATA_KB_04
(0050) export _INT0_GET_DATA_KB_04
(0051) export INT0_GET_DATA_KB_05
(0052) export _INT0_GET_DATA_KB_05
(0053) export INT0_GET_DATA_KB_06
(0054) export _INT0_GET_DATA_KB_06
(0055) export INT0_GET_DATA_KB_07
(0056) export _INT0_GET_DATA_KB_07
(0057)
(0058) ;-----------------------------------------------
(0059) ; Constant Definitions
(0060) ;-----------------------------------------------
(0061) area UserModules (ROM, REL)
(0062)
(0063) .SECTION
(0064) ;-----------------------------------------------------------------------------
(0065) ; FUNCTION NAME: int0_initialize
(0066) ;
(0067) ; DESCRIPTION:
(0068) ; initialize int0
(0069) ;-----------------------------------------------------------------------------
(0070) ;
(0071) ; ARGUMENTS: none
(0072) ;
(0073) ; RETURNS: none
(0074) ;
(0075) ;-----------------------------------------------------------------------------
(0076) int0_initialize:
(0077) _int0_initialize:
(0078) RAM_PROLOGUE RAM_USE_CLASS_1
(0079) MOV [INT0_NEW],00h
02DB: 55 01 00 MOV [1],0
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -