hour.fit

数字钟的VHDL源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/06/2009 22:21:02      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "hour"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "CP"                           : INPUT_PIN  = 39     ;
    "EN"                           : INPUT_PIN  = 40     ;
    "EN2"                          : INPUT_PIN  = 89     ;
    "RES"                          : INPUT_PIN  = 38     ;
    "HH0"                          : OUTPUT_PIN = 65     ;
    "HH1"                          : OUTPUT_PIN = 63     ;
    "HH2"                          : OUTPUT_PIN = 13     ;
    "HH3"                          : OUTPUT_PIN = 61     ;
    "HL0"                          : OUTPUT_PIN = 64     ;
    "HL1"                          : OUTPUT_PIN = 14     ;
    "HL2"                          : OUTPUT_PIN = 16     ;
    "HL3"                          : OUTPUT_PIN = 15     ;
    "|LPM_ADD_SUB:287|addcore:adder|:59" : LOCATION   = LC8_B17;
    ":13"                          : LOCATION   = LC8_B21;  -- QH3
    ":14"                          : LOCATION   = LC1_B21;  -- QH2
    ":15"                          : LOCATION   = LC4_B13;  -- QH1
    ":16"                          : LOCATION   = LC1_B13;  -- QH0
    ":17"                          : LOCATION   = LC5_B17;  -- QL3
    ":18"                          : LOCATION   = LC7_B17;  -- QL2
    ":19"                          : LOCATION   = LC3_B17;  -- QL1
    ":20"                          : LOCATION   = LC2_B17;  -- QL0
    ":80"                          : LOCATION   = LC2_B13;
    "~80~1"                        : LOCATION   = LC8_B13;
    ":95"                          : LOCATION   = LC4_B21;
    ":116"                         : LOCATION   = LC6_B17;
    ":130"                         : LOCATION   = LC1_B17;
    ":137"                         : LOCATION   = LC4_B17;
    ":338"                         : LOCATION   = LC5_B13;
    "~365~1"                       : LOCATION   = LC7_B13;
    "~406~1"                       : LOCATION   = LC6_B13;
    "~419~1"                       : LOCATION   = LC3_B13;

END;

INTERNAL_INFO "hour"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC8_B21,->LC1_B21,->LC4_B13,->LC1_B13,->LC5_B17,->LC7_B17,->LC3_B17,->LC2_B17|";
    OD3P40  : LORAX = "1:FB3|2:FH3R1|3:PA5R1C12->LC1_B13,->LC8_B13,->LC2_B13,->LC6_B13|,3:PA5R1C20->LC8_B21,->LC1_B21|||";
    OD1P89  : LORAX = "1:FB1|2:FH1R1|3:PA20R1C12->LC1_B13,->LC8_B13,->LC2_B13,->LC6_B13|,3:PA20R1C20->LC8_B21,->LC1_B21|||";
    OD2P38  : LORAX = "1:FB2->LC8_B21,->LC1_B21,->LC4_B13,->LC1_B13,->LC5_B17,->LC7_B17,->LC3_B17,->LC2_B17|";
    LC8_B21 : LORAX = "1:MSW7R1C21,G65R1->OH15R1P61|";
    LC1_B21 : LORAX = "1:MSW0R1C21,HHR19R1->OH0R1P13|";
    LC4_B13 : LORAX = "1:MSW3R1C13,G9R1->OH11R1P63,2:PA12R1C20->LC4_B21||";
    LC1_B13 : LORAX = "1:MSW0R1C13,G44R1->OH8R1P65|";
    LC5_B17 : LORAX = "1:MSW4R1C17,HHR30R1->OH4R1P15|";
    LC7_B17 : LORAX = "1:MSW6R1C16,HHR31R1->OH6R1P16|";
    LC3_B17 : LORAX = "1:MSW2R1C17,HHR15R1->OH2R1P14|";
    LC2_B17 : LORAX = "1:MSW1R1C16,G22R1->OH9R1P64|";
    LC2_B13 : LORAX = "1:MSW1R1C13,HHR11R1,PA4R1C16->LC5_B17,->LC7_B17,->LC3_B17,->LC2_B17|";
    LC4_B21 : LORAX = "1:MSW3R1C20,G30R1|2:PA11R1C12->LC8_B13,->LC5_B13,->LC7_B13,->LC3_B13|,2:PA16R1C16->LC2_B17||";
    LC6_B17 : LORAX = "1:MSW5R1C17,G89R1,PA17R1C12->LC4_B13,->LC5_B13,->LC7_B13,->LC3_B13|";
    LC1_B17 : LORAX = "1:MSW0R1C16,G41R1|2:PA18R1C12->LC5_B13,->LC7_B13,->LC6_B13|,2:PA18R1C20->LC8_B21,->LC1_B21||";
    LC7_B13 : LORAX = "1:MSW6R1C13,G53R1,PA7R1C16->LC3_B17|";
    LC3_B13 : LORAX = "1:MSW2R1C13,G2R1,PA2R1C16->LC5_B17,->LC7_B17|";
	LC8_B17 : LORAX2 = "X, LC7_B17, LC2_B17, LC3_B17";
	LC8_B21 : LORAX2 = "OD1P89, OD3P40, LC1_B17, LC8_B21";
	LC1_B21 : LORAX2 = "OD1P89, OD3P40, LC1_B17, LC1_B21";
	LC4_B13 : LORAX2 = "LC6_B17, LC8_B13, LC6_B13, LC4_B13";
	LC1_B13 : LORAX2 = "OD1P89, OD3P40, LC5_B13, LC1_B13";
	LC5_B17 : LORAX2 = "LC8_B17, LC2_B13, LC3_B13, LC5_B17";
	LC7_B17 : LORAX2 = "LC4_B17, LC2_B13, LC3_B13, LC7_B17";
	LC3_B17 : LORAX2 = "LC2_B13, LC7_B13, LC3_B17, LC2_B17";
	LC2_B17 : LORAX2 = "LC2_B13, LC1_B17, LC4_B21, LC2_B17";
	LC8_B13 : LORAX2 = "OD1P89, OD3P40, LC4_B21, LC1_B13";
	LC2_B13 : LORAX2 = "X, X, OD3P40, OD1P89";
	LC4_B21 : LORAX2 = "X, LC4_B13, LC1_B21, LC8_B21";
	LC6_B17 : LORAX2 = "LC2_B17, LC3_B17, LC5_B17, LC7_B17";
	LC1_B17 : LORAX2 = "LC7_B17, LC5_B17, LC3_B17, LC2_B17";
	LC4_B17 : LORAX2 = "X, X, LC2_B17, LC3_B17";
	LC5_B13 : LORAX2 = "LC4_B21, LC6_B17, LC1_B17, LC1_B13";
	LC7_B13 : LORAX2 = "X, LC4_B21, LC6_B17, LC1_B17";
	LC6_B13 : LORAX2 = "X, OD3P40, OD1P89, LC1_B17";
	LC3_B13 : LORAX2 = "X, LC2_B13, LC4_B21, LC6_B17";
END;