minute.fit

数字钟的VHDL源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/06/2009 20:17:19      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "minute"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "CP"                           : INPUT_PIN  = 39     ;
    "EN"                           : INPUT_PIN  = 40     ;
    "EN2"                          : INPUT_PIN  = 89     ;
    "Rd"                           : INPUT_PIN  = 38     ;
    "CO"                           : OUTPUT_PIN = 14     ;
    "MH0"                          : OUTPUT_PIN = 94     ;
    "MH1"                          : OUTPUT_PIN = 16     ;
    "MH2"                          : OUTPUT_PIN = 15     ;
    "MH3"                          : OUTPUT_PIN = 13     ;
    "ML0"                          : OUTPUT_PIN = 5      ;
    "ML1"                          : OUTPUT_PIN = 6      ;
    "ML2"                          : OUTPUT_PIN = 7      ;
    "ML3"                          : OUTPUT_PIN = 10     ;
    "|LPM_ADD_SUB:287|addcore:adder|:59" : LOCATION   = LC4_B19;
    "|LPM_ADD_SUB:415|addcore:adder|:59" : LOCATION   = LC4_A20;
    "|LPM_ADD_SUB:415|addcore:adder|:63" : LOCATION   = LC7_A20;
    ":14"                          : LOCATION   = LC1_B19;  -- QN7
    ":15"                          : LOCATION   = LC5_B19;  -- QN6
    ":16"                          : LOCATION   = LC7_B19;  -- QN5
    ":17"                          : LOCATION   = LC5_A20;  -- QN4
    ":18"                          : LOCATION   = LC8_A20;  -- QN3
    ":19"                          : LOCATION   = LC3_A20;  -- QN2
    ":20"                          : LOCATION   = LC2_A20;  -- QN1
    ":21"                          : LOCATION   = LC1_A20;  -- QN0
    ":89"                          : LOCATION   = LC1_B23;
    ":115"                         : LOCATION   = LC6_A20;
    ":185"                         : LOCATION   = LC8_B19;
    ":462"                         : LOCATION   = LC6_B19;
    "~462~1"                       : LOCATION   = LC4_B23;
    ":468"                         : LOCATION   = LC3_B19;
    ":474"                         : LOCATION   = LC2_B19;
    ":612"                         : LOCATION   = LC3_B23;

END;

INTERNAL_INFO "minute"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC1_B19,->LC5_B19,->LC7_B19,->LC5_A20,->LC8_A20,->LC3_A20,->LC2_A20,->LC1_A20|";
    OD3P40  : LORAX = "1:FB3|2:FH3R1,PA5R1C22->LC1_B23,->LC3_B23||";
    OD1P89  : LORAX = "1:FB1|2:FH1R1,PA13R1C22->LC1_B23||";
    OD2P38  : LORAX = "1:FB2->LC1_B19,->LC5_B19,->LC7_B19,->LC5_A20,->LC8_A20,->LC3_A20,->LC2_A20,->LC1_A20|";
    LC1_B19 : LORAX = "1:MSW0R1C19,HHR23R1->OH0R1P13|";
    LC5_B19 : LORAX = "1:MSW4R1C19,HHR36R1->OH4R1P15|";
    LC7_B19 : LORAX = "1:MSW6R1C19,HHR32R1->OH6R1P16|";
    LC5_A20 : LORAX = "1:MSW5R0C18,V16C18->OV1C18P94,2:G64R1,PA9R1C18->LC4_B19,->LC8_B19,->LC3_B19,->LC2_B19||";
    LC8_A20 : LORAX = "1:MSW7R0C19,HHR35R0->OH7R0P10|";
    LC3_A20 : LORAX = "1:MSW2R0C19,HHR4R0->OH2R0P7|";
    LC2_A20 : LORAX = "1:MSW1R0C19,HHR11R0->OH1R0P6|";
    LC1_A20 : LORAX = "1:MSW0R0C19,HHR23R0->OH0R0P5|";
    LC1_B23 : LORAX = "1:MSW0R1C23|2:V2C23,HHR20R0,PA16R0C19->LC5_A20,->LC8_A20,->LC3_A20,->LC2_A20,->LC1_A20|,2:HHR20R1,PA16R1C18->LC1_B19,->LC5_B19,->LC7_B19||";
    LC6_A20 : LORAX = "1:MSW5R0C19,V16C19,G61R1|2:PA20R1C18->LC1_B19,->LC5_B19,->LC7_B19|,2:PA20R1C22->LC4_B23,->LC3_B23||";
    LC8_B19 : LORAX = "1:MSW7R1C19,G56R1,PA4R1C22->LC4_B23,->LC3_B23|";
    LC4_B23 : LORAX = "1:MSW3R1C23,G25R1,PA0R1C18->LC6_B19,->LC3_B19,->LC2_B19|";
    LC3_B23 : LORAX = "1:MSW2R1C23,HHR15R1->OH2R1P14|";
	LC4_B19 : LORAX2 = "X, X, LC5_A20, LC7_B19";
	LC4_A20 : LORAX2 = "X, X, LC1_A20, LC2_A20";
	LC7_A20 : LORAX2 = "X, LC3_A20, LC1_A20, LC2_A20";
	LC1_B19 : LORAX2 = "LC1_B23, LC6_B19, LC1_B19, LC6_A20";
	LC5_B19 : LORAX2 = "LC1_B23, LC3_B19, LC5_B19, LC6_A20";
	LC7_B19 : LORAX2 = "LC1_B23, LC2_B19, LC7_B19, LC6_A20";
	LC5_A20 : LORAX2 = "X, LC1_B23, LC5_A20, LC6_A20";
	LC8_A20 : LORAX2 = "LC1_B23, LC7_A20, LC8_A20, LC6_A20";
	LC3_A20 : LORAX2 = "LC1_B23, LC4_A20, LC3_A20, LC6_A20";
	LC2_A20 : LORAX2 = "LC1_B23, LC2_A20, LC6_A20, LC1_A20";
	LC1_A20 : LORAX2 = "X, X, LC1_B23, LC1_A20";
	LC1_B23 : LORAX2 = "X, X, OD1P89, OD3P40";
	LC6_A20 : LORAX2 = "LC1_A20, LC2_A20, LC8_A20, LC3_A20";
	LC8_B19 : LORAX2 = "LC5_A20, LC7_B19, LC1_B19, LC5_B19";
	LC4_B23 : LORAX2 = "X, X, LC8_B19, LC6_A20";
	LC6_B19 : LORAX2 = "LC4_B19, LC4_B23, LC1_B19, LC5_B19";
	LC3_B19 : LORAX2 = "LC4_B23, LC5_B19, LC7_B19, LC5_A20";
	LC2_B19 : LORAX2 = "X, LC4_B23, LC5_A20, LC7_B19";
	LC3_B23 : LORAX2 = "X, OD3P40, LC8_B19, LC6_A20";
END;