hardwareprofile.h

来自「本附件为嵌入式Web的相关资料」· C头文件 代码 · 共 1,384 行 · 第 1/4 页

H
1,384 行
字号
1234
/*********************************************************************
 *
 *	Hardware specific definitions
 *
 *********************************************************************
 * FileName:        HardwareProfile.h
 * Dependencies:    None
 * Processor:       PIC18, PIC24F, PIC24H, dsPIC30F, dsPIC33F
 * Complier:        Microchip C18 v3.02 or higher
 *					Microchip C30 v2.01 or higher
 * Company:         Microchip Technology, Inc.
 *
 * Software License Agreement
 *
 * This software is owned by Microchip Technology Inc. ("Microchip") 
 * and is supplied to you for use exclusively as described in the 
 * associated software agreement.  This software is protected by 
 * software and other intellectual property laws.  Any use in 
 * violation of the software license may subject the user to criminal 
 * sanctions as well as civil liability.  Copyright 2006 Microchip
 * Technology Inc.  All rights reserved.
 *
 * This software is provided "AS IS."  MICROCHIP DISCLAIMS ALL 
 * WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, NOT LIMITED 
 * TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND 
 * INFRINGEMENT.  Microchip shall in no event be liable for special, 
 * incidental, or consequential damages.
 *
 *
 * Author               Date		Comment
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 * Howard Schlunder		10/03/06	Original, copied from Compiler.h
 ********************************************************************/
#ifndef __HARDWARE_PROFILE_H
#define __HARDWARE_PROFILE_H

#include "mchp_tcp_ip\tcpip.h"

// Choose which hardware profile to compile for here.  See 
// the hardware profiles below for meaning of various options.  
//#define PICDEMNET2
//#define HPC_EXPLORER
//#define PICDEMZ
//#define FS_USB
//#define PICDEMNET
//#define EXPLORER_16
//#define DSPICDEM11
//#define DSPICDEMNET1
//#define DSPICDEMNET2
//#define PICDEMNET2
//#define PICDEMNET2_MINI
//#define PIC18F97J60_TEST_BOARD
//#define YOUR_BOARD

// If no hardware profiles are defined, assume that we are using 
// a Microchip demo board and try to auto-select the correct profile
// based on processor selected in MPLAB
#if !defined(PICDEMNET2) && !defined(HPC_EXPLORER) && !defined(PICDEMZ) && !defined(FS_USB) && !defined(PICDEMNET) && !defined(EXPLORER_16) && !defined(DSPICDEM11) && !defined(DSPICDEMNET1) && !defined(DSPICDEMNET2) && !defined(PICDEMNET2) && !defined(PICDEMNET2_MINI) && !defined(PIC18F97J60_TEST_BOARD) && !defined(YOUR_BOARD)
	#if defined(__18F97J60)
		#define PICDEMNET2
	#elif defined(__18F67J60)
		#define PICDEMNET2_MINI
	#elif defined(__18F8722) || defined(__18F87J10)
		#define HPC_EXPLORER
	#elif defined(__18F4620)
		#define PICDEMZ
	#elif defined(__PIC24F__) || defined(__PIC24H__) || defined(__dsPIC33F__)
		#define EXPLORER_16
	#elif defined(__dsPIC30F__)
		#define DSPICDEM11
	#elif defined(__18F452)
		#define PICDEMNET
    #elif defined (__PIC32MX__)
        #define EXPLORER_16
	#endif
#endif

// Clock frequency value.
// This value is used to calculate Tick Counter value
#if defined(__18CXX) || defined(HI_TECH_C)	
	// All PIC18 processors
	#if defined(PICDEMNET2) || defined(PICDEMNET2_MINI)
		#define CLOCK_FREQ		(41666667)      // Hz
	#elif defined(FS_USB)
		#define CLOCK_FREQ		(48000000)      // Hz
	#elif defined(PICDEMNET)
//		#define CLOCK_FREQ		(40000000)      // Hz
		#define CLOCK_FREQ		(19660800)      // Hz
	#elif defined(PICDEMZ)
		#define CLOCK_FREQ		(16000000)		// Hz
//		#define CLOCK_FREQ		(25000000)		// Using ENC28J60 Clockout
	#else
		#define CLOCK_FREQ		(40000000)      // Hz
	#endif
#elif defined(__PIC24F__)	
	// PIC24F processor
	#define CLOCK_FREQ			(32000000)      // Hz
#elif defined(__PIC24H__)	
	// PIC24H processor
	#define CLOCK_FREQ			(80000000)      // Hz
#elif defined(__dsPIC33F__)	
	// dsPIC33F processor
	#define CLOCK_FREQ			(80000000)      // Hz
#elif defined(__dsPIC30F__)
	// dsPIC30F processor
	#define CLOCK_FREQ			(117920000)      // Hz
#elif defined (__PIC32MX__)
    #define CLOCK_FREQ          (36000000)
#endif

// Include proper device header file
// INSTR_FREQ is used to calculate Tick counter value, set UART 
// baud rate, etc. based on CLOCK_FREQ, defined in 
// (HardwareProfile.h)
#if defined(__18CXX) || defined(HI_TECH_C)	
	// All PIC18 processors
	#define INSTR_FREQ			(CLOCK_FREQ/4)
#elif defined(__PIC24F__)	// Microchip C30 compiler
	// PIC24F processor
	#define INSTR_FREQ			(CLOCK_FREQ/2)
#elif defined(__PIC24H__)	// Microchip C30 compiler
	// PIC24H processor
	#define INSTR_FREQ			(CLOCK_FREQ/2)
#elif defined(__dsPIC33F__)	// Microchip C30 compiler
	// dsPIC33F processor
	#define INSTR_FREQ			(CLOCK_FREQ/2)
#elif defined(__dsPIC30F__)	// Microchip C30 compiler
	// dsPIC30F processor
	#define INSTR_FREQ			(CLOCK_FREQ/4)
#elif defined (__PIC32MX__)
	#define INSTR_FREQ			(CLOCK_FREQ)
#else
	#error Unknown processor or compiler.  See HardwareProfile.h
#endif

// Hardware mappings
#if defined(HPC_EXPLORER) && !defined(HI_TECH_C)
// PICDEM HPC Explorer + Ethernet PICtail
	// I/O pins
	#define LED0_TRIS			(TRISDbits.TRISD0)
	#define LED0_IO				(PORTDbits.RD0)
	#define LED1_TRIS			(TRISDbits.TRISD1)
	#define LED1_IO				(PORTDbits.RD1)
	#define LED2_TRIS			(TRISDbits.TRISD2)
	#define LED2_IO				(PORTDbits.RD2)
	#define LED3_TRIS			(TRISDbits.TRISD3)
	#define LED3_IO				(PORTDbits.RD3)
	#define LED4_TRIS			(TRISDbits.TRISD4)
	#define LED4_IO				(PORTDbits.RD4)
	#define LED5_TRIS			(TRISDbits.TRISD5)
	#define LED5_IO				(PORTDbits.RD5)
	#define LED6_TRIS			(TRISDbits.TRISD6)
	#define LED6_IO				(PORTDbits.RD6)
	#define LED7_TRIS			(TRISDbits.TRISD7)
	#define LED7_IO				(PORTDbits.RD7)
	#define LED_IO				(*((volatile unsigned char*)(&PORTD)))


	#define BUTTON0_TRIS		(TRISBbits.TRISB0)
	#define	BUTTON0_IO			(PORTBbits.RB0)
	#define BUTTON1_TRIS		(TRISBbits.TRISB0)	// No Button1 on this board, remap to Button0
	#define	BUTTON1_IO			(PORTBbits.RB0)
	#define BUTTON2_TRIS		(TRISBbits.TRISB0)	// No Button2 on this board, remap to Button0
	#define	BUTTON2_IO			(PORTBbits.RB0)
	#define BUTTON3_TRIS		(TRISBbits.TRISB0)	// No Button3 on this board, remap to Button0
	#define	BUTTON3_IO			(PORTBbits.RB0)

	// ENC28J60 I/O pins
	#define ENC_RST_TRIS		(TRISBbits.TRISB5)
	#define ENC_RST_IO			(LATBbits.LATB5)
	#define ENC_CS_TRIS			(TRISBbits.TRISB3)
	#define ENC_CS_IO			(LATBbits.LATB3)
	#define ENC_SCK_TRIS		(TRISCbits.TRISC3)
	#define ENC_SDI_TRIS		(TRISCbits.TRISC4)
	#define ENC_SDO_TRIS		(TRISCbits.TRISC5)
	#define ENC_SPI_IF			(PIR1bits.SSPIF)
	#define ENC_SSPBUF			(SSPBUF)
	#define ENC_SPISTAT			(SSP1STAT)
	#define ENC_SPISTATbits		(SSP1STATbits)
	#define ENC_SPICON1			(SSP1CON1)
	#define ENC_SPICON1bits		(SSP1CON1bits)
	#define ENC_SPICON2			(SSP1CON2)

	// 25LC256 I/O pins
	#define EEPROM_CS_TRIS		(TRISBbits.TRISB4)
	#define EEPROM_CS_IO		(LATBbits.LATB4)
	#define EEPROM_SCK_TRIS		(TRISCbits.TRISC3)
	#define EEPROM_SDI_TRIS		(TRISCbits.TRISC4)
	#define EEPROM_SDO_TRIS		(TRISCbits.TRISC5)
	#define EEPROM_SPI_IF		(PIR1bits.SSPIF)
	#define EEPROM_SSPBUF		(SSPBUF)
	#define EEPROM_SPICON1		(SSP1CON1)
	#define EEPROM_SPICON1bits	(SSP1CON1bits)
	#define EEPROM_SPICON2		(SSP1CON2)
	#define EEPROM_SPISTAT		(SSP1STAT)
	#define EEPROM_SPISTATbits	(SSP1STATbits)

#elif defined(HPC_EXPLORER) && defined(HI_TECH_C)
// PICDEM HPC Explorer + Ethernet PICtail
	typedef struct
	{
	    unsigned char BF:1;
	    unsigned char UA:1;
	    unsigned char R_W:1;
	    unsigned char S:1;
	    unsigned char P:1;
	    unsigned char D_A:1;
	    unsigned char CKE:1;
	    unsigned char SMP:1;
	} SSPSTATbits;
	typedef struct 
	{
	    unsigned char RBIF:1;
	    unsigned char INT0IF:1;
	    unsigned char TMR0IF:1;
		unsigned char RBIE:1;
	    unsigned char INT0IE:1;
	    unsigned char TMR0IE:1;
	    unsigned char GIEL:1;
	    unsigned char GIEH:1;
	} INTCONbits;
	typedef struct 
	{
	    unsigned char RBIP:1;
	    unsigned char INT3IP:1;
	    unsigned char TMR0IP:1;
	    unsigned char INTEDG3:1;
	    unsigned char INTEDG2:1;
	    unsigned char INTEDG1:1;
	    unsigned char INTEDG0:1;
	    unsigned char RBPU:1;
	} INTCON2bits;
	typedef struct 
	{
	    unsigned char ADON:1;
	    unsigned char GO:1;
	    unsigned char CHS0:1;
	    unsigned char CHS1:1;
	    unsigned char CHS2:1;
	    unsigned char CHS3:1;
	} ADCON0bits;
	typedef struct 
	{
		unsigned char ADCS0:1;
		unsigned char ADCS1:1;
		unsigned char ADCS2:1;
		unsigned char ACQT0:1;
		unsigned char ACQT1:1;
		unsigned char ACQT2:1;
		unsigned char :1;
		unsigned char ADFM:1;
	} ADCON2bits;
	typedef struct 
	{
	    unsigned char TMR1IF:1;
	    unsigned char TMR2IF:1;
	    unsigned char CCP1IF:1;
	    unsigned char SSPIF:1;
	    unsigned char TXIF:1;
	    unsigned char RCIF:1;
	    unsigned char ADIF:1;
	    unsigned char PSPIF:1;
	} PIR1bits;
	typedef struct 
	{
	    unsigned char TMR1IE:1;
	    unsigned char TMR2IE:1;
	    unsigned char CCP1IE:1;
	    unsigned char SSPIE:1;
	    unsigned char TXIE:1;
	    unsigned char RCIE:1;
	    unsigned char ADIE:1;
	    unsigned char PSPIE:1;
	} PIE1bits;
	typedef struct
	{
	    unsigned char T0PS0:1;
	    unsigned char T0PS1:1;
	    unsigned char T0PS2:1;
	    unsigned char PSA:1;
	    unsigned char T0SE:1;
	    unsigned char T0CS:1;
	    unsigned char T08BIT:1;
	    unsigned char TMR0ON:1;
	} T0CONbits;
	typedef struct
	{
	    unsigned char TX9D:1;
	    unsigned char TRMT:1;
	    unsigned char BRGH:1;
	    unsigned char SENDB:1;
	    unsigned char SYNC:1;
	    unsigned char TXEN:1;
	    unsigned char TX9:1;
	    unsigned char CSRC:1;
	} TXSTAbits;
	typedef struct
	{
	    unsigned char RX9D:1;
	    unsigned char OERR:1;
	    unsigned char FERR:1;
	    unsigned char ADDEN:1;
	    unsigned char CREN:1;
	    unsigned char SREN:1;
	    unsigned char RX9:1;
	    unsigned char SPEN:1;
	} RCSTAbits;
	
	#define TXSTA				TXSTA1
	#define RCSTA				RCSTA1
	#define SPBRG				SPBRG1
	#define RCREG				RCREG1
	#define TXREG				TXREG1

	// I/O pins
	#define LED0_TRIS			(TRISD0)
	#define LED0_IO				(RD0)
	#define LED1_TRIS			(TRISD1)
	#define LED1_IO				(RD1)
	#define LED2_TRIS			(TRISD2)
	#define LED2_IO				(RD2)
	#define LED3_TRIS			(TRISD3)
	#define LED3_IO				(RD3)
	#define LED4_TRIS			(TRISD4)
	#define LED4_IO				(RD4)
	#define LED5_TRIS			(TRISD5)
	#define LED5_IO				(RD5)
	#define LED6_TRIS			(TRISD6)
	#define LED6_IO				(RD6)
	#define LED7_TRIS			(TRISD7)
	#define LED7_IO				(RD7)
	#define LED_IO				(*((volatile unsigned char*)(&PORTD)))

	#define BUTTON0_TRIS		(TRISB0)
	#define	BUTTON0_IO			(RB0)
	#define BUTTON1_TRIS		(TRISB0)	// No Button1 on this board, remap to Button0
	#define	BUTTON1_IO			(RB0)
	#define BUTTON2_TRIS		(TRISB0)	// No Button2 on this board, remap to Button0
	#define	BUTTON2_IO			(RB0)
	#define BUTTON3_TRIS		(TRISB0)	// No Button3 on this board, remap to Button0
	#define	BUTTON3_IO			(RB0)

	// ENC28J60 I/O pins
	#define ENC_RST_TRIS		(TRISB5)
	#define ENC_RST_IO			(LATB5)
	#define ENC_CS_TRIS			(TRISB3)
1234

hardwareprofile.h - 源码说明

本页面展示了「本附件为嵌入式Web的相关资料」中的 hardwareprofile.h 源码文件，采用 C头文件 编程语言编写，共 1,384 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫下载站收录了大量与Web相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?