hardwareprofile.h

来自「本附件为嵌入式Web的相关资料」· C头文件 代码 · 共 1,384 行 · 第 1/4 页

		unsigned char :1;
		unsigned char ADFM:1;
	} ADCON2bits;
	typedef struct 
	{
	    unsigned char TMR1IF:1;
	    unsigned char TMR2IF:1;
	    unsigned char CCP1IF:1;
	    unsigned char SSPIF:1;
	    unsigned char TXIF:1;
	    unsigned char RCIF:1;
	    unsigned char ADIF:1;
	    unsigned char PSPIF:1;
	} PIR1bits;
	typedef struct 
	{
	    unsigned char CCP2IF:1;
	    unsigned char TMR3IF:1;
	    unsigned char HLVDIF:1;
	    unsigned char BCLIF:1;
	    unsigned char EEIF:1;
	    unsigned char :1;
	    unsigned char CMIF:1;
	    unsigned char OSCFIF:1;
	} PIR2bits;
	typedef struct 
	{
	    unsigned char TMR1IE:1;
	    unsigned char TMR2IE:1;
	    unsigned char CCP1IE:1;
	    unsigned char SSPIE:1;
	    unsigned char TXIE:1;
	    unsigned char RCIE:1;
	    unsigned char ADIE:1;
	    unsigned char PSPIE:1;
	} PIE1bits;
	typedef struct
	{
	    unsigned char T0PS0:1;
	    unsigned char T0PS1:1;
	    unsigned char T0PS2:1;
	    unsigned char PSA:1;
	    unsigned char T0SE:1;
	    unsigned char T0CS:1;
	    unsigned char T08BIT:1;
	    unsigned char TMR0ON:1;
	} T0CONbits;
	typedef struct
	{
	    unsigned char TX9D:1;
	    unsigned char TRMT:1;
	    unsigned char BRGH:1;
	    unsigned char SENDB:1;
	    unsigned char SYNC:1;
	    unsigned char TXEN:1;
	    unsigned char TX9:1;
	    unsigned char CSRC:1;
	} TXSTAbits;
	typedef struct
	{
	    unsigned char RX9D:1;
	    unsigned char OERR:1;
	    unsigned char FERR:1;
	    unsigned char ADDEN:1;
	    unsigned char CREN:1;
	    unsigned char SREN:1;
	    unsigned char RX9:1;
	    unsigned char SPEN:1;
	} RCSTAbits;

	
	#define SSPSTATbits			(*((SSPSTATbits*)&SSPSTAT))
	#define INTCONbits			(*((INTCONbits*)&INTCON))
	#define INTCON2bits			(*((INTCON2bits*)&INTCON2))
	#define ADCON0bits			(*((ADCON0bits*)&ADCON0))
	#define ADCON2bits			(*((ADCON2bits*)&ADCON2))
	#define PIR1bits			(*((PIR1bits*)&PIR1))
	#define PIR2bits			(*((PIR2bits*)&PIR2))
	#define PIE1bits			(*((PIE1bits*)&PIE1))
	#define T0CONbits			(*((T0CONbits*)&T0CON))
	#define TXSTAbits			(*((TXSTAbits*)&TXSTA))
	#define RCSTAbits			(*((RCSTAbits*)&RCSTA))
	#define SSPCON1bits			(*((SSPCON1bits*)&SSPCON1))
	#define SSPCON2bits			(*((SSPCON2bits*)&SSPCON2))

	// I/O pins
	#define LED0_TRIS			(TRISA4)
	#define LED0_IO				(RA4)
	#define LED1_TRIS			(TRISA3)
	#define LED1_IO				(RA3)
	#define LED2_TRIS			(TRISA2)
	#define LED2_IO				(RA2)
	#define LED3_TRIS			(TRISA4)
	#define LED3_IO				(RA4)
	#define LED4_TRIS			(TRISA3)
	#define LED4_IO				(RA3)
	#define LED5_TRIS			(TRISA2)
	#define LED5_IO				(RA2)
	#define LED6_TRIS			(TRISA4)
	#define LED6_IO				(RA4)
	#define LED7_TRIS			(TRISA3)
	#define LED7_IO				(RA3)

	#define BUTTON0_TRIS		(TRISB5)
	#define	BUTTON0_IO			(RB5)
	#define BUTTON1_TRIS		(TRISB5)	// No Button1 on this board, remap to Button0
	#define	BUTTON1_IO			(RB5)
	#define BUTTON2_TRIS		(TRISB5)	// No Button2 on this board, remap to Button0
	#define	BUTTON2_IO			(RB5)
	#define BUTTON3_TRIS		(TRISB5)	// No Button3 on this board, remap to Button0
	#define	BUTTON3_IO			(RB5)

	// RTL8019AS I/O pins
	typedef struct
	{
		unsigned char data : 5;	// Bits 0 through 4
		unsigned char : 3;		// Bits 5 through 7
	} NIC_ADDR;
	typedef struct
	{
		unsigned char data : 8;	// Bits 0 through 7
	} NIC_DATA;
	#define NIC_ADDR_TRIS		(((NIC_ADDR*)&TRISB)->data)
	#define NIC_ADDR_IO			(((NIC_ADDR*)&LATB)->data)
	#define NIC_DATA_TRIS		(((NIC_DATA*)&TRISD)->data)
	#define NIC_DATA_IO			(((NIC_DATA*)&PORTD)->data)
	#define NIC_RESET_TRIS		(TRISE2)
	#define NIC_RESET_IO        (LATE2)
	#define NIC_ADDR_LATCH_TRIS	(PRODL)
	#define NIC_ADDR_LATCH_IO	(PRODL)
	#define NIC_IOW_TRIS		(TRISE1)
	#define NIC_IOW_IO          (LATE1)
	#define NIC_IOR_TRIS		(TRISE0)
	#define NIC_IOR_IO          (LATE0)

	// 24LC256 I/O pins
	#define EEPROM_SCL_TRIS		(TRISC3)
	#define EEPROM_SDA_TRIS		(TRISC4)
	#define EEPROM_SSPBUF		(SSPBUF)
	#define EEPROM_SSPCON1		(SSPCON1)
	#define EEPROM_SSPCON1bits	(SSPCON1bits)
	#define EEPROM_SSPCON2		(SSPCON2)
	#define EEPROM_SSPCON2bits	(SSPCON2bits)
	#define EEPROM_SSPSTATbits	(SSPSTATbits)

	// 24LC256 configuration
	#define EEPROM_CONTROL	(0xA0)		// Address 0
	#define I2CBAUD			(400000)	// Hz

	// LCD
	// LCD Module I/O pins
	typedef struct
	{
		unsigned char data : 4;	// Bits 0 through 3
		unsigned char : 4;		// Bits 4 through 7
	} LCD_DATA;
	#define LCD_DATA_TRIS		(((volatile LCD_DATA*)&TRISD)->data)
	#define LCD_DATA_IO			(((volatile LCD_DATA*)&LATD)->data)
	#define LCD_RD_WR_TRIS		(TRISD5)
	#define LCD_RD_WR_IO		(LATD5)
	#define LCD_RS_TRIS			(TRISD4)
	#define LCD_RS_IO			(LATD4)
	#define LCD_E_TRIS			(TRISA5)
	#define LCD_E_IO			(LATA5)

	// Do not use the DMA and other goodies that Microchip Ethernet modules have
	#define NON_MCHP_MAC

#elif defined(EXPLORER_16)
// Explorer 16 + Ethernet PICtail Plus

	#define LED0_TRIS			(TRISAbits.TRISA0)	// Ref D3
	#define LED0_IO				(PORTAbits.RA0)	
	#define LED1_TRIS			(TRISAbits.TRISA1)	// Ref D4
	#define LED1_IO				(PORTAbits.RA1)
	#define LED2_TRIS			(TRISAbits.TRISA2)	// Ref D5
	#define LED2_IO				(PORTAbits.RA2)
	#define LED3_TRIS			(TRISAbits.TRISA3)	// Ref D6
	#define LED3_IO				(PORTAbits.RA3)
	#define LED4_TRIS			(TRISAbits.TRISA4)	// Ref D7
	#define LED4_IO				(PORTAbits.RA4)
	#define LED5_TRIS			(TRISAbits.TRISA5)	// Ref D8
	#define LED5_IO				(PORTAbits.RA5)
	#define LED6_TRIS			(TRISAbits.TRISA6)	// Ref D9
	#define LED6_IO				(PORTAbits.RA6)
	#define LED7_TRIS			(TRISAbits.TRISA7)	// Ref D10	// Note: This is multiplexed with BUTTON1
	#define LED7_IO				(PORTAbits.RA7)
	#define LED_IO				(*((volatile unsigned char*)(&PORTA)))


	#define BUTTON0_TRIS		(TRISDbits.TRISD13)	// Ref S4
	#define	BUTTON0_IO			(PORTDbits.RD13)
	#define BUTTON1_TRIS		(TRISAbits.TRISA7)	// Ref S5	// Note: This is multiplexed with LED7
	#define	BUTTON1_IO			(PORTAbits.RA7)
	#define BUTTON2_TRIS		(TRISDbits.TRISD7)	// Ref S6
	#define	BUTTON2_IO			(PORTDbits.RD7)
	#define BUTTON3_TRIS		(TRISDbits.TRISD6)	// Ref S3
	#define	BUTTON3_IO			(PORTDbits.RD6)

	#define UARTTX_TRIS			(TRISFbits.TRISF5)
	#define UARTTX_IO			(PORTFbits.RF5)
	#define UARTRX_TRIS			(TRISFbits.TRISF4)
	#define UARTRX_IO			(PORTFbits.RF4)

	// ENC28J60 I/O pins
#ifdef __USE_SPI_1
    #define _ENC_USE_SPI_1
#elif defined(__USE_SPI_2)
    #define _ENC_USE_SPI_2
#elif defined(_SPI1)
    #define _ENC_USE_SPI_1
#elif defined(_SPI2)
    #define _ENC_USE_SPI_2
#else
#error "No SPI available"
#endif

#ifdef _ENC_USE_SPI_1 
	#define ENC_RST_TRIS		(TRISDbits.TRISD15)	// Not connected by default
	#define ENC_RST_IO			(PORTDbits.RD15)
    #define ENC_CS_TRIS			(TRISDbits.TRISD14)
	#define ENC_CS_IO			(PORTDbits.RD14)
	#define ENC_SCK_TRIS		(TRISFbits.TRISF6)
	#define ENC_SDI_TRIS		(TRISFbits.TRISF7)
	#define ENC_SDO_TRIS		(TRISFbits.TRISF8)
	#define ENC_SPI_IF			(IFS0bits.SPI1IF)
	#define ENC_SSPBUF			(SPI1BUF)
	#define ENC_SPISTAT			(SPI1STAT)
	#define ENC_SPISTATbits		(SPI1STATbits)
	#define ENC_SPICON1			(SPI1CON1)
	#define ENC_SPICON1bits		(SPI1CON1bits)
    #define mSetSPILatch()      {   TRISBbits.TRISB12 = 0, TRISBbits.TRISB13 = 0, LATBbits.LATB12 = 1, LATBbits.LATB13 = 1; }
#endif

#ifdef _ENC_USE_SPI_2 
	#define ENC_RST_TRIS		(TRISFbits.TRISF13)	// Not connected by default
	#define ENC_RST_IO			(PORTFbits.RF13)
    #define ENC_CS_TRIS			(TRISFbits.TRISF12)
	#define ENC_CS_IO			(PORTFbits.RF12)
	#define ENC_SCK_TRIS		(TRISGbits.TRISG6)
	#define ENC_SDI_TRIS		(TRISGbits.TRISG7)
	#define ENC_SDO_TRIS		(TRISGbits.TRISG8)
	#define ENC_SPI_IF			(IFS1bits.SPI2IF)
	#define ENC_SSPBUF			(SPI2BUF)
	#define ENC_SPISTAT			(SPI2STAT)
	#define ENC_SPISTATbits		(SPI2STATbits)
	#define ENC_SPICON1			(SPI2CON1)
	#define ENC_SPICON1bits		(SPI2CON1bits)
    #define mSetSPILatch()      
#endif

    // 25LC256 I/O pins
	#define EEPROM_CS_TRIS		(TRISDbits.TRISD12)
	#define EEPROM_CS_IO		(PORTDbits.RD12)
	#define EEPROM_SCK_TRIS		(TRISGbits.TRISG6)
	#define EEPROM_SDI_TRIS		(TRISGbits.TRISG7)
	#define EEPROM_SDO_TRIS		(TRISGbits.TRISG8)
	#define EEPROM_SPI_IF		(IFS2bits.SPI2IF)
	#define EEPROM_SSPBUF		(SPI2BUF)
	#define EEPROM_SPICON1		(SPI2CON1)
	#define EEPROM_SPICON1bits	(SPI2CON1bits)
	#define EEPROM_SPICON2		(SPI2CON2)
	#define EEPROM_SPISTAT		(SPI2STAT)
	#define EEPROM_SPISTATbits	(SPI2STATbits)

	// LCD Module I/O pins
	typedef struct
	{
		unsigned char data : 8;	// Bits 0 through 7
		unsigned char : 8;		// Bits 8 through 15
	} LCD_DATA;
	#define LCD_DATA_TRIS		(((LCD_DATA*)&TRISE)->data)
	#define LCD_DATA_IO			(((LCD_DATA*)&LATE)->data)
	#define LCD_RD_WR_TRIS		(TRISDbits.TRISD5)
	#define LCD_RD_WR_IO		(LATDbits.LATD5)
	#define LCD_RS_TRIS			(TRISBbits.TRISB15)
	#define LCD_RS_IO			(LATBbits.LATB15)
	#define LCD_E_TRIS			(TRISDbits.TRISD4)
	#define LCD_E_IO			(LATDbits.LATD4)

#elif defined(DSPICDEM11)
// dsPICDEM 1.1 Development Board + Ethernet PICtail airwired. There 
// is no PICtail header on this development board.  The following 
// airwires must be made:
// 1. dsPICDEM GND <-> PICtail GND (PICtail pin 27)
// 2. dsPICDEM Vdd <- PICtail VPIC (PICtail pin 25)
// 3. dsPICDEM RG2 -> PICtail ENC28J60 CS (PICtail pin 22)
// 4. dsPICDEM RF6 -> PICtail SCK (PICtail pin 11)
// 5. dsPICDEM RF7 <- PICtail SDI (PICtail pin 9)
// 6. dsPICDEM RF8 -> PICtail SDO (PICtail pin 7)
// 7. dsPICDEM RG3 -> PICtail 25LC256 CS (PICtail pin 20)

	#define LED0_TRIS			(TRISDbits.TRISD3)	// Ref LED4
	#define LED0_IO				(PORTDbits.RD3)	
	#define LED1_TRIS			(TRISDbits.TRISD2)	// Ref LED3
	#define LED1_IO				(PORTDbits.RD2)
	#define LED2_TRIS			(TRISDbits.TRISD1)	// Ref LED2
	#define LED2_IO				(PORTDbits.RD1)
	#define LED3_TRIS			(TRISDbits.TRISD0)	// Ref LED1
	#define LED3_IO				(PORTDbits.RD0)
	#define LED4_TRIS			(TRISDbits.TRISD3)	// No LED, Remapped to Ref LED4
	#define LED4_IO				(PORTDbits.RD3)	
	#define LED5_TRIS			(TRISDbits.TRISD2)	// No LED, Remapped to Ref LED3
	#define LED5_IO				(PORTDbits.RD2)
	#define LED6_TRIS			(TRISDbits.TRISD1)	// No LED, Remapped to Ref LED2
	#define LED6_IO				(PORTDbits.RD1)
	#define LED7_TRIS			(TRISDbits.TRISD0)	// No LED, Remapped to Ref LED1
	#define LED7_IO				(PORTDbits.RD0)

	#define BUTTON0_TRIS		(TRISAbits.TRISA15)	// Ref SW4
	#define	BUTTON0_IO			(PORTAbits.RA15)
	#define BUTTON1_TRIS		(TRISAbits.TRISA14)	// Ref SW3
	#define	BUTTON1_IO			(PORTAbits.RA14)
	#define BUTTON2_TRIS		(TRISAbits.TRISA13)	// Ref SW2
	#define	BUTTON2_IO			(PORTAbits.RA13)
	#define BUTTON3_TRIS		(TRISAbits.TRISA12)	// Ref SW1
	#define	BUTTON3_IO			(PORTAbits.RA12)

	#define UARTTX_TRIS			(TRISFbits.TRISF3)
	#define UARTTX_IO			(PORTFbits.RF3)
	#define UARTRX_TRIS			(TRISFbits.TRISF2)
	#define UARTRX_IO			(PORTFbits.RF2)

	// ENC28J60 I/O pins
	#define ENC_RST_TRIS		(0)	// Not connected
	#define ENC_RST_IO			(0)
	#define ENC_CS_TRIS			(TRISGbits.TRISG2)		// User must airwire this
	#define ENC_CS_IO			(PORTGbits.RG2)
	#define ENC_SCK_TRIS		(TRISFbits.TRISF6)		// User must airwire this
	#define ENC_SDI_TRIS		(TRISFbits.TRISF7)		// User must airwire this
	#define ENC_SDO_TRIS		(TRISFbits.TRISF8)		// User must airwire this
	#define ENC_SPI_IF			(IFS0bits.SPI1IF)
	#define ENC_SSPBUF			(SPI1BUF)
	#define ENC_SPICON1			(SPI1CON)
	#define ENC_SPICON1bits		(SPI1CONbits)
	#define ENC_SPICON2			(SPI1BUF)				// SPI1CON2 doesn't exist, remap to unimportant register
	#define ENC_SPISTAT			(SPI1STAT)
	#define ENC_SPISTATbits		(SPI1STATbits)

	// 25LC256 I/O pins
	#define EEPROM_CS_TRIS		(TRISGbits.TRISG3)	// User must airwire this
	#define EEPROM_CS_IO		(PORTGbits.RG3)
	#define EEPROM_SCK_TRIS		(TRISGbits.TRISG6)
	#define EEPROM_SDI_TRIS		(TRISGbits.TRISG7)
	#define EEPROM_SDO_TRIS		(TRISGbits.TRISG8)
	#define EEPROM_SPI_IF		(IFS0bits.SPI1IF)