📄 control.pin
字号:
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "control" ASSIGNED TO AN EPM7064LC68-7
GND : 1
GND : 2
VCCINT : 3
RESERVED : 4
RESERVED : 5
GND : 6
RESERVED : 7
RESERVED : 8
RESERVED : 9
RESERVED : 10
VCCIO : 11
RESERVED : 12
alarm_hourhset0 : 13
settime : 14
begend : 15
GND : 16
enter : 17
mode : 18
sechset2 : 19
seclset3 : 20
VCCIO : 21
weekset3 : 22
weekset1 : 23
weekset2 : 24
sechset1 : 25
GND : 26
minlset3 : 27
seclset1 : 28
seclset2 : 29
hourhset0 : 30
VCCIO : 31
minlset1 : 32
minlset2 : 33
GND : 34
VCCINT : 35
sechset0 : 36
minlset0 : 37
GND : 38
hourlset3 : 39
minhset1 : 40
minhset0 : 41
hourlset0 : 42
VCCIO : 43
hourlset1 : 44
seclset0 : 45
hourlset2 : 46
weekset0 : 47
GND : 48
hourhset1 : 49
minhset2 : 50
alarm_minlset1 : 51
alarm_minlset2 : 52
VCCIO : 53
alarm_minhset0 : 54
alarm_minhset1 : 55
alarm_minlset0 : 56
alarm_hourlset0 : 57
GND : 58
alarm_hourlset1 : 59
alarm_hourlset2 : 60
alarm_hourlset3 : 61
alarm_minlset3 : 62
VCCIO : 63
alarm_hourhset1 : 64
alarm_minhset2 : 65
GND : 66
keyup : 67
GND : 68
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -