cy7c109.ftm

vhdl cod for ram.For sp3e

<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:5.0) (0.0:5.0:7.0) (0.0:4.0:5.0) (0.0:5.0:7.0))
     (IOPATH CENeg D0 (3.0:8.0:15.0) (3.0:8.0:15.0) (0.0:4.0:7.0) (3.0:8.0:15.0) (0.0:4.0:7.0) (3.0:8.0:15.0))
     (IOPATH A0 D0 (3.0:8.0:15.0) (3.0:8.0:15.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (8.0))
    (SETUP A0 WENeg (12.0))
    (SETUP D0 CENeg (8.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (12.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
IDT71024S17L<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
IDT71024S17TY<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
IDT71024S17Y<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:6.0) (0.0:5.0:8.0) (0.0:4.0:6.0) (0.0:5.0:8.0))
     (IOPATH CENeg D0 (3.0:10.0:17.0) (3.0:10.0:17.0) (0.0:5.0:8.0) (3.0:10.0:17.0) (0.0:5.0:8.0) (3.0:10.0:17.0))
     (IOPATH A0 D0 (3.0:10.0:17.0) (3.0:10.0:17.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (9.0))
    (SETUP A0 WENeg (13.0))
    (SETUP D0 CENeg (9.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (13.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
IDT71024S20L<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
IDT71024S20TY<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
IDT71024S20Y<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:5.0:7.0) (0.0:5.0:8.0) (0.0:5.0:7.0) (0.0:5.0:8.0))
     (IOPATH CENeg D0 (3.0:15.0:20.0) (3.0:15.0:20.0) (0.0:5.0:8.0) (3.0:15.0:20.0) (0.0:5.0:8.0) (3.0:15.0:20.0))
     (IOPATH A0 D0 (3.0:15.0:20.0) (3.0:15.0:20.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (9.0))
    (SETUP A0 WENeg (15.0))
    (SETUP D0 CENeg (9.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (15.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
IDT71024S25L<SOURCE>IDT data sheet DSC-2964/10 October 1998</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:7.0:10.0) (0.0:7.0:10.0) (0.0:7.0:10.0) (0.0:7.0:10.0))
     (IOPATH CENeg D0 (3.0:18.0:25.0) (3.0:18.0:25.0) (0.0:7.0:10.0) (3.0:18.0:25.0) (0.0:7.0:10.0) (3.0:18.0:25.0))
     (IOPATH A0 D0 (3.0:18.0:25.0) (3.0:18.0:25.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (10.0))
    (SETUP A0 WENeg (15.0))
    (SETUP D0 CENeg (10.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (15.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
MCM6226BBEJ15<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
MCM6226BBXJ15<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=5pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0))
     (IOPATH CENeg D0 (5.0:10.0:15.0) (5.0:10.0:15.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0))
     (IOPATH A0 D0 (5.0:10.0:15.0) (5.0:10.0:15.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (7.0))
    (SETUP A0 WENeg (12.0))
    (SETUP D0 CENeg (7.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (12.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
MCM6226BBEJ17<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
MCM6226BBXJ17<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=5pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0))
     (IOPATH CENeg D0 (5.0:11.0:17.0) (5.0:11.0:17.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0))
     (IOPATH A0 D0 (5.0:11.0:17.0) (5.0:11.0:17.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (8.0))
    (SETUP A0 WENeg (14.0))
    (SETUP D0 CENeg (8.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (14.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
MCM6226BBEJ20<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
MCM6226BBXJ20<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=5pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0))
     (IOPATH CENeg D0 (5.0:13.0:20.0) (5.0:13.0:20.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0) (0.0:5.0:7.0))
     (IOPATH A0 D0 (5.0:13.0:20.0) (5.0:13.0:20.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (9.0))
    (SETUP A0 WENeg (15.0))
    (SETUP D0 CENeg (9.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (15.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
MCM6226BBEJ25<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
MCM6226BBXJ25<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=5pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0))
     (IOPATH CENeg D0 (5.0:15.0:25.0) (5.0:15.0:25.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0))
     (IOPATH A0 D0 (7.0:15.0:25.0) (7.0:15.0:25.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (10.0))
    (SETUP A0 WENeg (17.0))
    (SETUP D0 CENeg (10.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (17.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
MCM6226BBEJ35<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
MCM6226BBXJ35<SOURCE>Motorola Semiconductor Datasheet MCM6226BB/D Rev 2 10/31/96</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=5pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0))
     (IOPATH CENeg D0 (5.0:25.0:35.0) (5.0:25.0:35.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0) (0.0:5.0:8.0))
     (IOPATH A0 D0 (8.0:25.0:35.0) (8.0:25.0:35.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (11.0))
    (SETUP A0 WENeg (20.0))
    (SETUP D0 CENeg (11.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (20.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
PDM41024LA10SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA10T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA10TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA10SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA10T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA10TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0))
     (IOPATH CENeg D0 (3.0:6.0:10.0) (3.0:6.0:10.0) (0.0:4.0:6.0) (3.0:6.0:10.0) (0.0:4.0:6.0) (3.0:6.0:10.0))
     (IOPATH A0 D0 (3.0:6.0:10.0) (3.0:6.0:10.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (7.0))
    (SETUP A0 WENeg (10.0))
    (SETUP D0 CENeg (7.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (8.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
PDM41024LA12SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA12T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA12TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA12SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA12T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA12TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0))
     (IOPATH CENeg D0 (3.0:8.0:12.0) (3.0:8.0:12.0) (0.0:4.0:6.0) (3.0:8.0:12.0) (0.0:4.0:6.0) (3.0:8.0:12.0))
     (IOPATH A0 D0 (3.0:8.0:12.0) (3.0:8.0:12.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (7.0))
    (SETUP A0 WENeg (10.0))
    (SETUP D0 CENeg (7.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (8.0))
 )
</TIMING></FMFTIME>
<FMFTIME>
PDM41024LA15SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA15T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024LA15TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA15SO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA15T<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
PDM41024SA15TSO<SOURCE>Paradigm Technology Datasheet 4/09/98</SOURCE>
<COMMENT> The values listed are for VCC=4.5 to 5.5V, CL=30pF, Ta=0 to +70 Celsius</COMMENT>
<COMMENT> Typical values are derived</COMMENT>
<TIMING>
  (DELAY (ABSOLUTE
     (IOPATH OENeg D0 () () (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0) (0.0:4.0:6.0))
     (IOPATH CENeg D0 (3.0:9.0:15.0) (3.0:9.0:15.0) (0.0:5.0:7.0) (3.0:9.0:15.0) (0.0:5.0:7.0) (3.0:9.0:15.0))
     (IOPATH A0 D0 (3.0:10.0:15.0) (3.0:10.0:15.0))
  ))
  (TIMINGCHECK
    (SETUP D0 WENeg (7.0))
    (SETUP A0 WENeg (11.0))
    (SETUP D0 CENeg (7.0))
    (HOLD D0 WENeg (0.0))
    (HOLD A0 WENeg (0.0))
    (HOLD D0 CENeg (0.0))
    (WIDTH  (negedge WENeg) (12.0))
 )
</TIMING></FMFTIME>
</BODY></FTML>