demo5.fit

DEMO2 数码管扫描显示电路/DEMO4 计数时钟 DEMO5 键盘扫描设计/DEMO6 波形发生器/DEMO7 用DAC实现电压信号检测/DEMO8 ADC电压测量/DEMO9 液晶驱动电路设计

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/07/2003 09:37:48      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "demo5"
BEGIN

    DEVICE = "EPM7128SLC84-15";

    "CLK"                          : INPUT_PIN  = 83     ;
    "RESET"                        : INPUT_PIN  = 1      ;
    "RL0"                          : INPUT_PIN  = 63     ; -- LC97
    "RL1"                          : INPUT_PIN  = 64     ; -- LC99
    "RL2"                          : INPUT_PIN  = 65     ; -- LC101
    "RL3"                          : INPUT_PIN  = 67     ; -- LC104
    "RL4"                          : INPUT_PIN  = 68     ; -- LC105
    "RL5"                          : INPUT_PIN  = 69     ; -- LC107
    "RL6"                          : INPUT_PIN  = 70     ; -- LC109
    "RL7"                          : INPUT_PIN  = 73     ; -- LC115
    "SW1"                          : INPUT_PIN  = 33     ; -- LC64
    "SW2"                          : INPUT_PIN  = 34     ; -- LC61
    "SW3"                          : INPUT_PIN  = 35     ; -- LC59
    "SW4"                          : INPUT_PIN  = 36     ; -- LC57
    "SW5"                          : INPUT_PIN  = 37     ; -- LC56
    "SW6"                          : INPUT_PIN  = 39     ; -- LC53
    "SW7"                          : INPUT_PIN  = 40     ; -- LC51
    "SW8"                          : INPUT_PIN  = 41     ; -- LC49
    "GL"                           : OUTPUT_PIN = 74     ; -- LC117
    "KB0"                          : OUTPUT_PIN = 58     ; -- LC91
    "LED0"                         : OUTPUT_PIN = 9      ; -- LC8
    "LED1"                         : OUTPUT_PIN = 10     ; -- LC6
    "LED2"                         : OUTPUT_PIN = 11     ; -- LC5
    "LED3"                         : OUTPUT_PIN = 12     ; -- LC3
    "LED4"                         : OUTPUT_PIN = 15     ; -- LC29
    "LED5"                         : OUTPUT_PIN = 16     ; -- LC27
    "LED6"                         : OUTPUT_PIN = 17     ; -- LC25
    "LED7"                         : OUTPUT_PIN = 18     ; -- LC24
    "RL"                           : OUTPUT_PIN = 75     ; -- LC118
    "SPK"                          : OUTPUT_PIN = 31     ; -- LC35
    "YL"                           : OUTPUT_PIN = 76     ; -- LC120

END;

INTERNAL_INFO "demo5"
BEGIN
	DEVICE = EPM7128SLC84-15;
	LC91    : LORAX = "G136R0,PA21R0C0,PA21R0C2,PA21R0C7,PA24R0C1";
	LC118   : LORAX = "G111R0";
	LC24    : LORAX = "G32R0";
	LC25    : LORAX = "G175R0";
	LC27    : LORAX = "G177R0";
	LC29    : LORAX = "G118R0";
	LC3     : LORAX = "G27R0";
	LC5     : LORAX = "G82R0";
	LC6     : LORAX = "G83R0";
	LC8     : LORAX = "G85R0";
	LC120   : LORAX = "G113R0";
	LC117   : LORAX = "G110R0";
	LC35    : LORAX = "G35R0";
	OH96R0P63 : LORAX = "G222R0,PA31R0C0,PA31R0C7";
	OH114R0P73 : LORAX = "G169R0,PA21R0C1";
	OH108R0P70 : LORAX = "G18R0,PA5R0C1";
	OH106R0P69 : LORAX = "G76R0,PA12R0C1";
	OH104R0P68 : LORAX = "G75R0,PA14R0C1";
	OH103R0P67 : LORAX = "G167R0,PA19R0C0,PA19R0C2";
	OH100R0P65 : LORAX = "G165R0,PA22R0C0,PA22R0C7";
	OH98R0P64 : LORAX = "G223R0,PA35R0C0,PA35R0C7";
END;