demo8.fit

DEMO2 数码管扫描显示电路/DEMO4 计数时钟 DEMO5 键盘扫描设计/DEMO6 波形发生器/DEMO7 用DAC实现电压信号检测/DEMO8 ADC电压测量/DEMO9 液晶驱动电路设计

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/15/2004 09:30:25      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "demo8"
BEGIN

    DEVICE = "EPM7128SLC84-6";

    "CKDSP"                        : INPUT_PIN  = 83     ;
    "CLK"                          : INPUT_PIN  = 2      ;
    "D0"                           : INPUT_PIN  = 44     ; -- LC65
    "D1"                           : INPUT_PIN  = 45     ; -- LC67
    "D2"                           : INPUT_PIN  = 46     ; -- LC69
    "D3"                           : INPUT_PIN  = 48     ; -- LC72
    "D4"                           : INPUT_PIN  = 49     ; -- LC73
    "D5"                           : INPUT_PIN  = 50     ; -- LC75
    "D6"                           : INPUT_PIN  = 51     ; -- LC77
    "D7"                           : INPUT_PIN  = 52     ; -- LC80
    "RESET"                        : INPUT_PIN  = 1      ;
    "SW0"                          : INPUT_PIN  = 33     ; -- LC64
    "SW1"                          : INPUT_PIN  = 34     ; -- LC61
    "SW2"                          : INPUT_PIN  = 35     ; -- LC59
    "SW3"                          : INPUT_PIN  = 36     ; -- LC57
    "SW4"                          : INPUT_PIN  = 37     ; -- LC56
    "SW5"                          : INPUT_PIN  = 39     ; -- LC53
    "SW6"                          : INPUT_PIN  = 40     ; -- LC51
    "SW7"                          : INPUT_PIN  = 41     ; -- LC49
    "A"                            : OUTPUT_PIN = 63     ; -- LC97
    "B"                            : OUTPUT_PIN = 64     ; -- LC99
    "C"                            : OUTPUT_PIN = 65     ; -- LC101
    "D"                            : OUTPUT_PIN = 67     ; -- LC104
    "E"                            : OUTPUT_PIN = 68     ; -- LC105
    "F"                            : OUTPUT_PIN = 69     ; -- LC107
    "G"                            : OUTPUT_PIN = 70     ; -- LC109
    "IO_DS1"                       : OUTPUT_PIN = 80     ; -- LC126
    "IO_DS2"                       : OUTPUT_PIN = 81     ; -- LC128
    "SS0"                          : OUTPUT_PIN = 58     ; -- LC91
    "START"                        : OUTPUT_PIN = 60     ; -- LC93
    "|DELED:11|~227~1"             : LOCATION   = LC110  ;
    "|DELED:11|~227~2"             : LOCATION   = LC98   ;
    "|DELED:11|~245~1"             : LOCATION   = LC102  ;
    "|DELED:11|~262~1"             : LOCATION   = LC103  ;
    "|DELED:11|~264~1"             : LOCATION   = LC106  ;
    "|readad:36|enout0"            : LOCATION   = LC100  ;
    "|readad:36|enout1"            : LOCATION   = LC83   ; -- PIN 54
    "|readad:36|enout2"            : LOCATION   = LC89   ;
    "|readad:36|enout3"            : LOCATION   = LC90   ;
    "|readad:36|enout4"            : LOCATION   = LC86   ; -- PIN 56
    "|readad:36|enout5"            : LOCATION   = LC82   ;
    "|readad:36|enout6"            : LOCATION   = LC81   ;

END;

INTERNAL_INFO "demo8"
BEGIN
	DEVICE = EPM7128SLC84-6;
	LC109   : LORAX = "G138R0";
	LC126   : LORAX = "G200R0";
	LC128   : LORAX = "G202R0";
	LC91    : LORAX = "G136R0,PA21R0C6";
	LC93    : LORAX = "G191R0";
	LC107   : LORAX = "G197R0";
	LC105   : LORAX = "G195R0";
	LC104   : LORAX = "G52R0";
	LC101   : LORAX = "G49R0";
	LC99    : LORAX = "G108R0";
	LC97    : LORAX = "G106R0";
	OH79R0P52 : LORAX = "G14R0,PA1R0C6";
	OH76R0P51 : LORAX = "G12R0,PA8R0C6";
	OH74R0P50 : LORAX = "G70R0,PA11R0C6";
	OH72R0P49 : LORAX = "G69R0,PA17R0C6";
	OH71R0P48 : LORAX = "G161R0,PA22R0C6";
	OH68R0P46 : LORAX = "G159R0,PA20R0C6";
	OH66R0P45 : LORAX = "G217R0,PA30R0C6";
	OH64R0P44 : LORAX = "G216R0,PA29R0C6";
	LC82    : LORAX = "G46R0,PA3R0C5,PA3R0C6";
	LC86    : LORAX = "G103R0,PA10R0C5,PA12R0C6";
	LC90    : LORAX = "G135R0,PA18R0C5,PA18R0C6";
	LC89    : LORAX = "G134R0,PA26R0C5,PA26R0C6";
	LC83    : LORAX = "G47R0,PA2R0C5";
	LC81    : LORAX = "G45R0,PA7R0C5,PA4R0C6";
	LC100   : LORAX = "G109R0,PA14R0C6,PA14R0C5";
	OH130R0P1 : LORAX = "G81R0,PA9R0C6,PA9R0C5";
	LC110   : LORAX = "G139R0,PA19R0C6";
	LC98    : LORAX = "G107R0,PA10R0C6";
	LC106   : LORAX = "G196R0,PA28R0C6";
	LC102   : LORAX = "G50R0,PA6R0C6";
	LC103   : LORAX = "G51R0,PA7R0C6";
END;