📄 demo4.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 12/15/2004 09:15:58
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "demo4"
BEGIN
DEVICE = "EPM7128SLC84-6";
"CKDSP" : INPUT_PIN = 83 ;
"CLK" : INPUT_PIN = 2 ;
"RESET" : INPUT_PIN = 1 ;
"SETHOUR" : INPUT_PIN = 73 ; -- LC115
"SETMIN" : INPUT_PIN = 74 ; -- LC117
"SW1" : INPUT_PIN = 33 ; -- LC64
"SW2" : INPUT_PIN = 34 ; -- LC61
"SW3" : INPUT_PIN = 35 ; -- LC59
"SW4" : INPUT_PIN = 36 ; -- LC57
"SW5" : INPUT_PIN = 37 ; -- LC56
"SW6" : INPUT_PIN = 39 ; -- LC53
"SW7" : INPUT_PIN = 40 ; -- LC51
"SW8" : INPUT_PIN = 41 ; -- LC49
"A" : OUTPUT_PIN = 63 ; -- LC97
"B" : OUTPUT_PIN = 64 ; -- LC99
"C" : OUTPUT_PIN = 65 ; -- LC101
"D" : OUTPUT_PIN = 67 ; -- LC104
"E" : OUTPUT_PIN = 68 ; -- LC105
"F" : OUTPUT_PIN = 69 ; -- LC107
"G" : OUTPUT_PIN = 70 ; -- LC109
"IO_DS1" : OUTPUT_PIN = 80 ; -- LC126
"IO_DS2" : OUTPUT_PIN = 81 ; -- LC128
"IO_DS7" : OUTPUT_PIN = 30 ; -- LC37
"LAMP0" : OUTPUT_PIN = 9 ; -- LC8
"LAMP1" : OUTPUT_PIN = 10 ; -- LC6
"LAMP2" : OUTPUT_PIN = 11 ; -- LC5
"SPEAK" : OUTPUT_PIN = 31 ; -- LC35
"SS0" : OUTPUT_PIN = 58 ; -- LC91
"SS1" : OUTPUT_PIN = 60 ; -- LC93
"SS2" : OUTPUT_PIN = 61 ; -- LC94
"|XALERT:8|:16" : LOCATION = LC3 ; -- PIN 12 -- |XALERT:8|current_state1
"|XALERT:8|:17" : LOCATION = LC4 ; -- |XALERT:8|current_state0
"|XDELED:10|~400~1" : LOCATION = LC100 ;
"|XHOUR:3|LPM_ADD_SUB:280|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC121 ;
"|XHOUR:3|LPM_ADD_SUB:280|addcore:adder|addcore:adder0|result_node2" : LOCATION = LC122 ;
"|XHOUR:3|LPM_ADD_SUB:280|addcore:adder|addcore:adder0|result_node3" : LOCATION = LC124 ;
"|XHOUR:3|:9" : LOCATION = LC123 ; -- PIN 77 -- |XHOUR:3|hour5
"|XHOUR:3|:10" : LOCATION = LC118 ; -- PIN 75 -- |XHOUR:3|hour4
"|XHOUR:3|:11" : LOCATION = LC117 ; -- PIN 74 -- |XHOUR:3|hour3
"|XHOUR:3|:12" : LOCATION = LC115 ; -- PIN 73 -- |XHOUR:3|hour2
"|XHOUR:3|:13" : LOCATION = LC114 ; -- |XHOUR:3|hour1
"|XHOUR:3|:14" : LOCATION = LC127 ; -- |XHOUR:3|hour0
"|XMINUTE:2|LPM_ADD_SUB:554|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC40 ; -- PIN 28
"|XMINUTE:2|LPM_ADD_SUB:554|addcore:adder|addcore:adder0|result_node3" : LOCATION = LC15 ;
"|XMINUTE:2|:12" : LOCATION = LC7 ;
"|XMINUTE:2|:15" : LOCATION = LC1 ; -- |XMINUTE:2|min6
"|XMINUTE:2|:16" : LOCATION = LC14 ; -- PIN 5 -- |XMINUTE:2|min5
"|XMINUTE:2|:17" : LOCATION = LC12 ; -- |XMINUTE:2|min4
"|XMINUTE:2|:18" : LOCATION = LC10 ; -- |XMINUTE:2|min3
"|XMINUTE:2|:19" : LOCATION = LC9 ; -- |XMINUTE:2|min2
"|XMINUTE:2|:20" : LOCATION = LC11 ; -- PIN 8 -- |XMINUTE:2|min1~45
"|XMINUTE:2|:21" : LOCATION = LC2 ; -- |XMINUTE:2|min0
"|XMINUTE:2|:22" : LOCATION = LC16 ; -- PIN 4 -- |XMINUTE:2|ehour
"|XSECOND:1|LPM_ADD_SUB:553|addcore:adder|addcore:adder0|result_node1" : LOCATION = LC119 ;
"|XSECOND:1|LPM_ADD_SUB:553|addcore:adder|addcore:adder0|result_node3" : LOCATION = LC125 ; -- PIN 79
"|XSECOND:1|:12" : LOCATION = LC76 ;
"|XSECOND:1|:15" : LOCATION = LC86 ; -- PIN 56 -- |XSECOND:1|sec6
"|XSECOND:1|:16" : LOCATION = LC87 ; -- |XSECOND:1|sec5
"|XSECOND:1|:17" : LOCATION = LC120 ; -- PIN 76 -- |XSECOND:1|sec4
"|XSECOND:1|:18" : LOCATION = LC74 ; -- |XSECOND:1|sec3
"|XSECOND:1|:19" : LOCATION = LC113 ; -- |XSECOND:1|sec2
"|XSECOND:1|:20" : LOCATION = LC67 ; -- PIN 45 -- |XSECOND:1|sec1~45
"|XSECOND:1|:21" : LOCATION = LC116 ; -- |XSECOND:1|sec0
"|XSECOND:1|:22" : LOCATION = LC83 ; -- PIN 54 -- |XSECOND:1|emin
"|XSETTIME:9|:30" : LOCATION = LC84 ; -- |XSETTIME:9|sel12
"|XSETTIME:9|:31" : LOCATION = LC82 ; -- |XSETTIME:9|sel11
"|XSETTIME:9|:32" : LOCATION = LC81 ; -- |XSETTIME:9|sel10
"|XSETTIME:9|~870~1" : LOCATION = LC90 ;
"|XSETTIME:9|~870~1~2" : LOCATION = LC96 ; -- PIN 62
"|XSETTIME:9|~876~1" : LOCATION = LC92 ;
"|XSETTIME:9|~876~1~2" : LOCATION = LC85 ; -- PIN 55
"|XSETTIME:9|~882~1" : LOCATION = LC13 ; -- PIN 6
"|XSETTIME:9|~888~1" : LOCATION = LC89 ;
END;
INTERNAL_INFO "demo4"
BEGIN
DEVICE = EPM7128SLC84-6;
LC5 : LORAX = "G82R0";
LC6 : LORAX = "G83R0";
LC8 : LORAX = "G85R0";
LC128 : LORAX = "G202R0";
LC126 : LORAX = "G200R0";
LC37 : LORAX = "G90R0";
LC105 : LORAX = "G195R0";
LC107 : LORAX = "G197R0";
LC109 : LORAX = "G138R0";
LC97 : LORAX = "G106R0";
LC99 : LORAX = "G108R0";
LC101 : LORAX = "G49R0";
LC104 : LORAX = "G52R0";
LC35 : LORAX = "G35R0";
LC94 : LORAX = "G192R0";
LC93 : LORAX = "G191R0";
LC91 : LORAX = "G136R0";
LC1 : LORAX = "G25R0,PA6R0C2,PA6R0C5,PA4R0C0";
OH130R0P1 : LORAX = "G81R0,PA9R0C2,PA9R0C0,PA9R0C5";
LC14 : LORAX = "G172R0,PA30R0C2,PA31R0C0";
LC12 : LORAX = "G117R0,PA26R0C2,PA26R0C5,PA26R0C0";
LC10 : LORAX = "G115R0,PA22R0C2,PA21R0C5,PA22R0C0";
LC9 : LORAX = "G114R0,PA19R0C2,PA20R0C5,PA19R0C0";
LC11 : LORAX = "G116R0,PA23R0C2,PA23R0C0";
LC2 : LORAX = "G26R0,PA3R0C2,PA0R0C5,PA0R0C0";
LC76 : LORAX = "G190R0,PA30R0C0";
OH116R0P74 : LORAX = "G225R0,PA29R0C4";
LC83 : LORAX = "G47R0,PA5R0C4";
LC86 : LORAX = "G103R0,PA10R0C5";
LC87 : LORAX = "G104R0,PA11R0C0,PA14R0C5";
LC120 : LORAX = "G113R0,PA11R0C5";
LC74 : LORAX = "G188R0,PA28R0C5,PA28R0C7,PA27R0C4";
LC113 : LORAX = "G53R0,PA7R0C7,PA7R0C4,PA7R0C5";
LC67 : LORAX = "G100R0,PA17R0C4,PA12R0C7,PA12R0C0,PA12R0C5";
LC116 : LORAX = "G56R0,PA1R0C4,PA1R0C7,PA2R0C5";
LC119 : LORAX = "G112R0,PA12R0C4";
LC125 : LORAX = "G199R0,PA28R0C4";
LC40 : LORAX = "G93R0,PA17R0C0";
LC15 : LORAX = "G173R0,PA32R0C0";
LC3 : LORAX = "G27R0,PA5R0C0";
LC4 : LORAX = "G28R0,PA1R0C0";
LC90 : LORAX = "G135R0,PA18R0C5,PA18R0C6";
LC84 : LORAX = "G48R0,PA8R0C5,PA8R0C0";
LC82 : LORAX = "G46R0,PA1R0C5,PA3R0C0";
LC81 : LORAX = "G45R0,PA4R0C5,PA7R0C0";
LC117 : LORAX = "G110R0,PA17R0C5,PA16R0C7";
LC123 : LORAX = "G144R0,PA18R0C7,PA18R0C0";
LC118 : LORAX = "G111R0,PA15R0C5,PA14R0C7";
LC115 : LORAX = "G55R0,PA3R0C7,PA3R0C5";
LC114 : LORAX = "G54R0,PA5R0C7,PA6R0C0";
LC127 : LORAX = "G201R0,PA30R0C7,PA30R0C5";
LC7 : LORAX = "G84R0,PA17R0C7";
OH114R0P73 : LORAX = "G169R0,PA21R0C0";
LC16 : LORAX = "G174R0,PA34R0C0";
LC121 : LORAX = "G142R0,PA19R0C7";
LC122 : LORAX = "G143R0,PA26R0C7";
LC124 : LORAX = "G145R0,PA22R0C7";
LC92 : LORAX = "G137R0,PA19R0C5,PA19R0C6";
LC13 : LORAX = "G171R0,PA28R0C6,PA28R0C0";
LC89 : LORAX = "G134R0,PA22R0C5,PA22R0C6";
LC100 : LORAX = "G109R0,PA9R0C6";
LC96 : LORAX = "G194R0,PA32R0C5";
LC85 : LORAX = "G102R0,PA13R0C5";
END;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -