📄 video.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (5.0V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.0 Build 190 1/28/2004 SJ Full Version
CHIP "VIDEO" ASSIGNED TO AN: EPM7128SLC84-15
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND+ : 1 : : : : :
GND+ : 2 : : : : :
VCCINT : 3 : power : : 5.0V : :
DISPLAYD[4] : 4 : output : TTL : : : Y
DISPLAYD[3] : 5 : output : TTL : : : Y
DISPLAYD[5] : 6 : output : TTL : : : Y
GND : 7 : gnd : : : :
DISPLAYD[6] : 8 : output : TTL : : : Y
DISPLAYD[2] : 9 : output : TTL : : : Y
DISPLAYD[1] : 10 : output : TTL : : : Y
DISPLAYD[0] : 11 : output : TTL : : : Y
DISPLAYE[4] : 12 : output : TTL : : : Y
VCCIO : 13 : power : : 5.0V : :
TDI : 14 : input : TTL : : : N
DISPLAYE[3] : 15 : output : TTL : : : Y
DISPLAYE[5] : 16 : output : TTL : : : Y
DISPLAYE[6] : 17 : output : TTL : : : Y
DISPLAYE[2] : 18 : output : TTL : : : Y
GND : 19 : gnd : : : :
DISPLAYE[1] : 20 : output : TTL : : : Y
DISPLAYE[0] : 21 : output : TTL : : : Y
GND* : 22 : : : : :
TMS : 23 : input : TTL : : : N
DISPLAYF[4] : 24 : output : TTL : : : Y
DISPLAYF[3] : 25 : output : TTL : : : Y
VCCIO : 26 : power : : 5.0V : :
DISPLAYF[5] : 27 : output : TTL : : : Y
DISPLAYF[6] : 28 : output : TTL : : : Y
DISPLAYF[2] : 29 : output : TTL : : : Y
DISPLAYF[1] : 30 : output : TTL : : : Y
DISPLAYF[0] : 31 : output : TTL : : : Y
GND : 32 : gnd : : : :
DATAIN[0] : 33 : input : TTL : : : Y
DATAIN[1] : 34 : input : TTL : : : Y
DATAIN[2] : 35 : input : TTL : : : Y
DATAIN[3] : 36 : input : TTL : : : Y
DATAIN[4] : 37 : input : TTL : : : Y
VCCIO : 38 : power : : 5.0V : :
DATAIN[5] : 39 : input : TTL : : : Y
DATAIN[6] : 40 : input : TTL : : : Y
ADDRESS[0] : 41 : input : TTL : : : Y
GND : 42 : gnd : : : :
VCCINT : 43 : power : : 5.0V : :
ADDRESS[1] : 44 : input : TTL : : : Y
ADDRESS[2] : 45 : input : TTL : : : Y
GND* : 46 : : : : :
GND : 47 : gnd : : : :
CLK : 48 : input : TTL : : : Y
GND* : 49 : : : : :
GND* : 50 : : : : :
GND* : 51 : : : : :
GND* : 52 : : : : :
VCCIO : 53 : power : : 5.0V : :
DISPLAYA[4] : 54 : output : TTL : : : Y
DISPLAYA[3] : 55 : output : TTL : : : Y
DISPLAYA[5] : 56 : output : TTL : : : Y
DISPLAYA[6] : 57 : output : TTL : : : Y
DISPLAYA[2] : 58 : output : TTL : : : Y
GND : 59 : gnd : : : :
DISPLAYA[1] : 60 : output : TTL : : : Y
DISPLAYA[0] : 61 : output : TTL : : : Y
TCK : 62 : input : TTL : : : N
DISPLAYB[4] : 63 : output : TTL : : : Y
DISPLAYB[3] : 64 : output : TTL : : : Y
DISPLAYB[5] : 65 : output : TTL : : : Y
VCCIO : 66 : power : : 5.0V : :
DISPLAYB[6] : 67 : output : TTL : : : Y
DISPLAYB[2] : 68 : output : TTL : : : Y
DISPLAYB[1] : 69 : output : TTL : : : Y
DISPLAYB[0] : 70 : output : TTL : : : Y
TDO : 71 : output : TTL : : : N
GND : 72 : gnd : : : :
GND* : 73 : : : : :
DISPLAYC[4] : 74 : output : TTL : : : Y
DISPLAYC[3] : 75 : output : TTL : : : Y
DISPLAYC[5] : 76 : output : TTL : : : Y
DISPLAYC[6] : 77 : output : TTL : : : Y
VCCIO : 78 : power : : 5.0V : :
DISPLAYC[2] : 79 : output : TTL : : : Y
DISPLAYC[1] : 80 : output : TTL : : : Y
DISPLAYC[0] : 81 : output : TTL : : : Y
GND : 82 : gnd : : : :
GND+ : 83 : : : : :
GND+ : 84 : : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -