dianzhen.fit.qmsg

实现一个10秒倒计时电路

{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "clk2~reg0 Global clock " "Info: Automatically promoted some destinations of signal clk2~reg0 to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "clk2 " "Info: Destination clk2 may be non-global or may not use global clock" {  } { { "E:/yaning8/ya3/db/dianzhen.vhd" "" "" { Text "E:/yaning8/ya3/db/dianzhen.vhd" 11 -1 0 } }  } 0}  } { { "E:/yaning8/ya3/db/dianzhen.vhd" "" "" { Text "E:/yaning8/ya3/db/dianzhen.vhd" 59 -1 0 } }  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0}
{ "Info" "IFYGR_FYGR_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tsu 2.0 ns " "Info: Assuming a global tsu requirement of 2.0 ns" {  } {  } 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tco 1.0 ns " "Info: Assuming a global tco requirement of 1.0 ns" {  } {  } 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tpd 1.0 ns " "Info: Assuming a global tpd requirement of 1.0 ns" {  } {  } 0}  } {  } 0}
{ "Info" "IFYGR_FYGR_START_MAC_SCAN_CHAIN_INFERENCING" "" "Info: Start DSP scan-chain inferencing" {  } {  } 0}
{ "Info" "IFYGR_FYGR_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Info: Completed DSP scan-chain inferencing" {  } {  } 0}
{ "Info" "IFYGR_FYGR_START_LUT_PACKING" "" "Info: Moving registers into LUTs to improve timing and density" {  } {  } 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Info: Started processing fast register assignments" {  } {  } 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Info: Finished processing fast register assignments" {  } {  } 0}
{ "Info" "IFYGR_FYGR_FINISH_LUT_PACKING" "" "Info: Finished moving registers into LUTs" {  } {  } 0}
{ "Info" "IFYGR_FYGR_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "38 unused 3.30 1 37 0 " "Info: Number of I/O pins in group: 38 (unused VREF, 3.30 VCCIO, 1 input, 37 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: Details of I/O bank before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 2 36 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 2 total pin(s) used --  36 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 42 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0}  } {  } 0}  } {  } 0}