osd_pll.vhd

infra pen controller, cmos sensor control and sdram control

-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll 

-- ============================================================
-- File Name: osd_pll.vhd
-- Megafunction Name(s):
-- 			altpll
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 6.0 Build 202 06/20/2006 SP 1 SJ Web Edition
-- ************************************************************


--Copyright (C) 1991-2006 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions 
--and other software and tools, and its AMPP partner logic 
--functions, and any output files any of the foregoing 
--(including device programming or simulation files), and any 
--associated documentation or information are expressly subject 
--to the terms and conditions of the Altera Program License 
--Subscription Agreement, Altera MegaCore Function License 
--Agreement, or other applicable license agreement, including, 
--without limitation, that your use is for the sole purpose of 
--programming logic devices manufactured by Altera and sold by 
--Altera or its authorized distributors.  Please refer to the 
--applicable agreement for further details.


LIBRARY ieee;
USE ieee.std_logic_1164.all;

LIBRARY altera_mf;
USE altera_mf.all;

ENTITY osd_pll IS
	PORT
	(
		inclk0		: IN STD_LOGIC  := '0';
		c0		: OUT STD_LOGIC ;
		c1		: OUT STD_LOGIC 
	);
END osd_pll;


ARCHITECTURE SYN OF osd_pll IS

	SIGNAL sub_wire0	: STD_LOGIC_VECTOR (5 DOWNTO 0);
	SIGNAL sub_wire1	: STD_LOGIC ;
	SIGNAL sub_wire2	: STD_LOGIC ;
	SIGNAL sub_wire3	: STD_LOGIC ;
	SIGNAL sub_wire4	: STD_LOGIC_VECTOR (1 DOWNTO 0);
	SIGNAL sub_wire5_bv	: BIT_VECTOR (0 DOWNTO 0);
	SIGNAL sub_wire5	: STD_LOGIC_VECTOR (0 DOWNTO 0);



	COMPONENT altpll
	GENERIC (
		clk0_divide_by		: NATURAL;
		clk0_duty_cycle		: NATURAL;
		clk0_multiply_by		: NATURAL;
		clk0_phase_shift		: STRING;
		clk1_divide_by		: NATURAL;
		clk1_duty_cycle		: NATURAL;
		clk1_multiply_by		: NATURAL;
		clk1_phase_shift		: STRING;
		compensate_clock		: STRING;
		inclk0_input_frequency		: NATURAL;
		intended_device_family		: STRING;
		lpm_type		: STRING;
		operation_mode		: STRING;
		pll_type		: STRING;
		port_activeclock		: STRING;
		port_areset		: STRING;
		port_clkbad0		: STRING;
		port_clkbad1		: STRING;
		port_clkloss		: STRING;
		port_clkswitch		: STRING;
		port_fbin		: STRING;
		port_inclk0		: STRING;
		port_inclk1		: STRING;
		port_locked		: STRING;
		port_pfdena		: STRING;
		port_pllena		: STRING;
		port_scanaclr		: STRING;
		port_scanclk		: STRING;
		port_scandata		: STRING;
		port_scandataout		: STRING;
		port_scandone		: STRING;
		port_scanread		: STRING;
		port_scanwrite		: STRING;
		port_clk0		: STRING;
		port_clk1		: STRING;
		port_clk2		: STRING;
		port_clk3		: STRING;
		port_clk4		: STRING;
		port_clk5		: STRING;
		port_clkena0		: STRING;
		port_clkena1		: STRING;
		port_clkena2		: STRING;
		port_clkena3		: STRING;
		port_clkena4		: STRING;
		port_clkena5		: STRING;
		port_enable0		: STRING;
		port_enable1		: STRING;
		port_extclk0		: STRING;
		port_extclk1		: STRING;
		port_extclk2		: STRING;
		port_extclk3		: STRING;
		port_extclkena0		: STRING;
		port_extclkena1		: STRING;
		port_extclkena2		: STRING;
		port_extclkena3		: STRING;
		port_sclkout0		: STRING;
		port_sclkout1		: STRING
	);
	PORT (
			inclk	: IN STD_LOGIC_VECTOR (1 DOWNTO 0);
			clk	: OUT STD_LOGIC_VECTOR (5 DOWNTO 0)
	);
	END COMPONENT;

BEGIN
	sub_wire5_bv(0 DOWNTO 0) <= "0";
	sub_wire5    <= To_stdlogicvector(sub_wire5_bv);
	sub_wire2    <= sub_wire0(1);
	sub_wire1    <= sub_wire0(0);
	c0    <= sub_wire1;
	c1    <= sub_wire2;
	sub_wire3    <= inclk0;
	sub_wire4    <= sub_wire5(0 DOWNTO 0) & sub_wire3;

	altpll_component : altpll
	GENERIC MAP (
		clk0_divide_by => 1,
		clk0_duty_cycle => 50,
		clk0_multiply_by => 1,
		clk0_phase_shift => "0",
		clk1_divide_by => 1,
		clk1_duty_cycle => 50,
		clk1_multiply_by => 7,
		clk1_phase_shift => "0",
		compensate_clock => "CLK0",
		inclk0_input_frequency => 83333,
		intended_device_family => "Cyclone II",
		lpm_type => "altpll",
		operation_mode => "NORMAL",
		pll_type => "FAST",
		port_activeclock => "PORT_UNUSED",
		port_areset => "PORT_UNUSED",
		port_clkbad0 => "PORT_UNUSED",
		port_clkbad1 => "PORT_UNUSED",
		port_clkloss => "PORT_UNUSED",
		port_clkswitch => "PORT_UNUSED",
		port_fbin => "PORT_UNUSED",
		port_inclk0 => "PORT_USED",
		port_inclk1 => "PORT_UNUSED",
		port_locked => "PORT_UNUSED",
		port_pfdena => "PORT_UNUSED",
		port_pllena => "PORT_UNUSED",
		port_scanaclr => "PORT_UNUSED",
		port_scanclk => "PORT_UNUSED",
		port_scandata => "PORT_UNUSED",
		port_scandataout => "PORT_UNUSED",
		port_scandone => "PORT_UNUSED",
		port_scanread => "PORT_UNUSED",
		port_scanwrite => "PORT_UNUSED",
		port_clk0 => "PORT_USED",
		port_clk1 => "PORT_USED",
		port_clk2 => "PORT_UNUSED",
		port_clk3 => "PORT_UNUSED",
		port_clk4 => "PORT_UNUSED",
		port_clk5 => "PORT_UNUSED",
		port_clkena0 => "PORT_UNUSED",
		port_clkena1 => "PORT_UNUSED",
		port_clkena2 => "PORT_UNUSED",
		port_clkena3 => "PORT_UNUSED",
		port_clkena4 => "PORT_UNUSED",
		port_clkena5 => "PORT_UNUSED",
		port_enable0 => "PORT_UNUSED",
		port_enable1 => "PORT_UNUSED",