rom_sin1.v

verilog语言实现的数字下变频设计。 在ALTERA的QUARTUS ii下实现。实用

// megafunction wizard: %ROM: 1-PORT%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altsyncram 

// ============================================================
// File Name: rom_sin1.v
// Megafunction Name(s):
// 			altsyncram
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 6.0 Build 178 04/27/2006 SJ Full Version
// ************************************************************


//Copyright (C) 1991-2006 Altera Corporation
//Your use of Altera Corporation's design tools, logic functions 
//and other software and tools, and its AMPP partner logic 
//functions, and any output files any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Altera Program License 
//Subscription Agreement, Altera MegaCore Function License 
//Agreement, or other applicable license agreement, including, 
//without limitation, that your use is for the sole purpose of 
//programming logic devices manufactured by Altera and sold by 
//Altera or its authorized distributors.  Please refer to the 
//applicable agreement for further details.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module rom_sin1 (
	address,
	clock,
	q);

	input	[11:0]  address;
	input	  clock;
	output	[11:0]  q;

	wire [11:0] sub_wire0;
	wire [11:0] q = sub_wire0[11:0];

	altsyncram	altsyncram_component (
				.clock0 (clock),
				.address_a (address),
				.q_a (sub_wire0),
				.aclr0 (1'b0),
				.aclr1 (1'b0),
				.address_b (1'b1),
				.addressstall_a (1'b0),
				.addressstall_b (1'b0),
				.byteena_a (1'b1),
				.byteena_b (1'b1),
				.clock1 (1'b1),
				.clocken0 (1'b1),
				.clocken1 (1'b1),
				.data_a ({12{1'b1}}),
				.data_b (1'b1),
				.q_b (),
				.rden_b (1'b1),
				.wren_a (1'b0),
				.wren_b (1'b0));
	defparam
		altsyncram_component.clock_enable_input_a = "BYPASS",
		altsyncram_component.clock_enable_output_a = "BYPASS",
`ifdef NO_PLI
		altsyncram_component.init_file = "../HDL/DDC/hex/sin_4096.rif"
`else
		altsyncram_component.init_file = "../HDL/DDC/hex/sin_4096.hex"
`endif
,
		altsyncram_component.intended_device_family = "Stratix II",
		altsyncram_component.lpm_hint = "ENABLE_RUNTIME_MOD=NO",
		altsyncram_component.lpm_type = "altsyncram",
		altsyncram_component.numwords_a = 4096,
		altsyncram_component.operation_mode = "ROM",
		altsyncram_component.outdata_aclr_a = "NONE",
		altsyncram_component.outdata_reg_a = "CLOCK0",
		altsyncram_component.widthad_a = 12,
		altsyncram_component.width_a = 12,
		altsyncram_component.width_byteena_a = 1;


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0"
// Retrieval info: PRIVATE: AclrAddr NUMERIC "0"
// Retrieval info: PRIVATE: AclrByte NUMERIC "0"
// Retrieval info: PRIVATE: AclrOutput NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8"
// Retrieval info: PRIVATE: BlankMemory NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: Clken NUMERIC "0"
// Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0"
// Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A"
// Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Stratix II"
// Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0"
// Retrieval info: PRIVATE: JTAG_ID STRING "NONE"
// Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0"
// Retrieval info: PRIVATE: MIFfilename STRING "../HDL/DDC/hex/sin_4096.hex"
// Retrieval info: PRIVATE: NUMWORDS_A NUMERIC "4096"
// Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
// Retrieval info: PRIVATE: RegAddr NUMERIC "1"
// Retrieval info: PRIVATE: RegOutput NUMERIC "1"
// Retrieval info: PRIVATE: SingleClock NUMERIC "1"
// Retrieval info: PRIVATE: UseDQRAM NUMERIC "0"
// Retrieval info: PRIVATE: WidthAddr NUMERIC "12"
// Retrieval info: PRIVATE: WidthData NUMERIC "12"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS"
// Retrieval info: CONSTANT: INIT_FILE STRING "../HDL/DDC/hex/sin_4096.hex"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Stratix II"
// Retrieval info: CONSTANT: LPM_HINT STRING "ENABLE_RUNTIME_MOD=NO"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram"
// Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "4096"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "ROM"
// Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE"
// Retrieval info: CONSTANT: OUTDATA_REG_A STRING "CLOCK0"
// Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "12"
// Retrieval info: CONSTANT: WIDTH_A NUMERIC "12"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1"
// Retrieval info: USED_PORT: address 0 0 12 0 INPUT NODEFVAL address[11..0]
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL clock
// Retrieval info: USED_PORT: q 0 0 12 0 OUTPUT NODEFVAL q[11..0]
// Retrieval info: CONNECT: @address_a 0 0 12 0 address 0 0 12 0
// Retrieval info: CONNECT: q 0 0 12 0 @q_a 0 0 12 0
// Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1.bsf TRUE FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_sin1_bb.v FALSE