📄 zhankong.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 11/25/2005 19:25:03
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "zhankong"
BEGIN
DEVICE = "EPF10K10LC84-3";
"clkin" : INPUT_PIN = 1 ;
"clk" : INPUT_PIN = 43 ;
"beichu10" : OUTPUT_PIN = 9 ;
"beichu11" : OUTPUT_PIN = 11 ;
"beichu12" : OUTPUT_PIN = 25 ;
"beichu13" : OUTPUT_PIN = 5 ;
"beichu20" : OUTPUT_PIN = 69 ;
"beichu21" : OUTPUT_PIN = 65 ;
"beichu22" : OUTPUT_PIN = 7 ;
"beichu23" : OUTPUT_PIN = 3 ;
"beichu30" : OUTPUT_PIN = 79 ;
"beichu31" : OUTPUT_PIN = 23 ;
"beichu32" : OUTPUT_PIN = 24 ;
"beichu33" : OUTPUT_PIN = 37 ;
"chu10" : OUTPUT_PIN = 53 ;
"chu11" : OUTPUT_PIN = 64 ;
"chu12" : OUTPUT_PIN = 22 ;
"chu13" : OUTPUT_PIN = 39 ;
"chu20" : OUTPUT_PIN = 52 ;
"chu21" : OUTPUT_PIN = 58 ;
"chu22" : OUTPUT_PIN = 61 ;
"chu23" : OUTPUT_PIN = 59 ;
"chu30" : OUTPUT_PIN = 17 ;
"chu31" : OUTPUT_PIN = 67 ;
"chu32" : OUTPUT_PIN = 51 ;
"chu33" : OUTPUT_PIN = 21 ;
"|LPM_ADD_SUB:768|addcore:adder|:59" : LOCATION = LC6_B22;
"|LPM_ADD_SUB:904|addcore:adder|:59" : LOCATION = LC4_B17;
"|LPM_ADD_SUB:1032|addcore:adder|:59" : LOCATION = LC6_B16;
"|LPM_ADD_SUB:1032|addcore:adder|:77" : LOCATION = LC7_B16;
"|LPM_ADD_SUB:1183|addcore:adder|:59" : LOCATION = LC6_B7 ;
"|LPM_ADD_SUB:1319|addcore:adder|:59" : LOCATION = LC4_B4 ;
"|LPM_ADD_SUB:1319|addcore:adder|:77" : LOCATION = LC4_B6 ;
"|LPM_ADD_SUB:1447|addcore:adder|:59" : LOCATION = LC3_B1 ;
":3" : LOCATION = LC1_B5 ;
":5" : LOCATION = LC8_B11;
":7" : LOCATION = LC6_B1 ;
":9" : LOCATION = LC5_B1 ;
":11" : LOCATION = LC1_B11;
":13" : LOCATION = LC6_B4 ;
":15" : LOCATION = LC5_B11;
":17" : LOCATION = LC7_B20;
":19" : LOCATION = LC3_B9 ;
":21" : LOCATION = LC6_B11;
":23" : LOCATION = LC4_B11;
":25" : LOCATION = LC2_B23;
":27" : LOCATION = LC7_B11;
":29" : LOCATION = LC2_B11;
":31" : LOCATION = LC6_B20;
":33" : LOCATION = LC2_B20;
":35" : LOCATION = LC8_B20;
":37" : LOCATION = LC3_B20;
":39" : LOCATION = LC7_B17;
":41" : LOCATION = LC4_B20;
":43" : LOCATION = LC1_B17;
":45" : LOCATION = LC2_B18;
":47" : LOCATION = LC1_B20;
":49" : LOCATION = LC3_B11;
":51" : LOCATION = LC2_B8 ; -- En
":52" : LOCATION = LC6_B8 ; -- m
":53" : LOCATION = LC1_B8 ; -- n
":54" : LOCATION = LC5_B20; -- Entransfer
":55" : LOCATION = LC8_B5 ; -- Highnum13
":56" : LOCATION = LC2_B5 ; -- Highnum12
":57" : LOCATION = LC8_B1 ; -- Highnum11
":58" : LOCATION = LC2_B1 ; -- Highnum10
":59" : LOCATION = LC3_B6 ; -- Highnum23
":60" : LOCATION = LC8_B4 ; -- Highnum22
":61" : LOCATION = LC8_B6 ; -- Highnum21
":62" : LOCATION = LC1_B4 ; -- Highnum20
":63" : LOCATION = LC8_B9 ; -- Highnum33
":64" : LOCATION = LC5_B7 ; -- Highnum32
":65" : LOCATION = LC1_B7 ; -- Highnum31
":66" : LOCATION = LC1_B9 ; -- Highnum30
":67" : LOCATION = LC2_B16; -- Totalnum13
":68" : LOCATION = LC3_B16; -- Totalnum12
":69" : LOCATION = LC4_B16; -- Totalnum11
":70" : LOCATION = LC5_B16; -- Totalnum10
":71" : LOCATION = LC8_B24; -- Totalnum23
":72" : LOCATION = LC3_B24; -- Totalnum22
":73" : LOCATION = LC6_B17; -- Totalnum21
":74" : LOCATION = LC5_B24; -- Totalnum20
":75" : LOCATION = LC3_B17; -- Totalnum33
":76" : LOCATION = LC3_B18; -- Totalnum32
":77" : LOCATION = LC2_B22; -- Totalnum31
":78" : LOCATION = LC1_B18; -- Totalnum30
":718" : LOCATION = LC1_B16;
"~718~1" : LOCATION = LC2_B13;
":732" : LOCATION = LC8_B17;
":746" : LOCATION = LC3_B22;
":806" : LOCATION = LC7_B22;
":940" : LOCATION = LC1_B22;
":947" : LOCATION = LC4_B22;
":959" : LOCATION = LC1_B24;
":960" : LOCATION = LC6_B24;
":1054" : LOCATION = LC8_B22;
":1060" : LOCATION = LC8_B18;
":1066" : LOCATION = LC5_B22;
":1078" : LOCATION = LC7_B24;
":1084" : LOCATION = LC4_B24;
":1090" : LOCATION = LC5_B17;
":1102" : LOCATION = LC8_B16;
":1103" : LOCATION = LC7_B18;
":1133" : LOCATION = LC5_B5 ;
":1147" : LOCATION = LC6_B6 ;
":1161" : LOCATION = LC2_B9 ;
":1373" : LOCATION = LC5_B6 ;
":1374" : LOCATION = LC2_B4 ;
":1499" : LOCATION = LC5_B4 ;
":1506" : LOCATION = LC1_B6 ;
":1518" : LOCATION = LC4_B5 ;
":1519" : LOCATION = LC6_B5 ;
":1583" : LOCATION = LC7_B6 ;
":1589" : LOCATION = LC7_B4 ;
":1595" : LOCATION = LC2_B6 ;
":1607" : LOCATION = LC7_B5 ;
":1613" : LOCATION = LC3_B5 ;
":1619" : LOCATION = LC7_B1 ;
"~1819~1" : LOCATION = LC2_B17;
"~1830~1" : LOCATION = LC1_B1 ;
"~1830~2" : LOCATION = LC4_B1 ;
"~1854~1" : LOCATION = LC3_B8 ;
"~1854~2" : LOCATION = LC3_B4 ;
"~1860~1" : LOCATION = LC5_B9 ;
"~1860~2" : LOCATION = LC6_B9 ;
"~1860~3" : LOCATION = LC7_B9 ;
"~1866~1" : LOCATION = LC8_B7 ;
"~1872~1" : LOCATION = LC3_B7 ;
"~1878~1" : LOCATION = LC5_B8 ;
"~1878~2" : LOCATION = LC4_B9 ;
"~1878~3" : LOCATION = LC4_B8 ;
"~1926~1" : LOCATION = LC2_B24;
"~1950~1" : LOCATION = LC4_B18;
"~1950~2" : LOCATION = LC5_B18;
"~1950~3" : LOCATION = LC6_B18;
":2376" : LOCATION = LC7_B8 ;
"~2376~1" : LOCATION = LC2_B7 ;
"~2376~2" : LOCATION = LC4_B7 ;
"~2376~3" : LOCATION = LC7_B7 ;
END;
INTERNAL_INFO "zhankong"
BEGIN
DEVICE = EPF10K10LC84-3;
OD5P43 : LORAX = "1:FB5->LC1_B5,->LC8_B11,->LC6_B1,->LC5_B1,->LC1_B11,->LC6_B4,->LC5_B11,->LC7_B20,->LC3_B9,->LC6_B11,->LC4_B11,->LC2_B23,->LC7_B11,->LC2_B11,->LC6_B20,->LC2_B20,->LC8_B20,->LC3_B20,->LC7_B17,->LC4_B20,->LC1_B17,->LC2_B18,->LC1_B20,->LC3_B11,->LC5_B20,->LC8_B5,->LC2_B5,->LC8_B1,->LC2_B1,->LC3_B6,->LC8_B4,->LC8_B6,->LC1_B4,->LC8_B9,->LC5_B7,->LC1_B7,->LC1_B9,->LC2_B16,->LC3_B16,->LC4_B16,->LC5_B16,->LC8_B24,->LC3_B24,->LC6_B17,->LC5_B24,->LC3_B17,->LC3_B18,->LC2_B22,->LC1_B18|";
OD4P1 : LORAX = "1:FB4->LC2_B8,->LC6_B8,->LC1_B8|";
LC4_B17 : LORAX = "1:MSW3R1C17,HHR10R1,PA12R1C23->LC6_B24,->LC4_B24|";
LC3_B1 : LORAX = "1:MSW2R1C0,HHL3R1,PA19R1C4->LC6_B5,->LC3_B5|";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -