📄 rom_waveforms.html
字号:
<html>
<head>
<title>Sample Waveforms for rom.v </title>
</head>
<body>
<h2><CENTER>Sample behavioral waveforms for design file rom.v </CENTER></h2>
<P>The following waveforms show the behavior of altsyncram megafunction for the chosen set of parameters in design rom.v. For the purpose of this simulation, the contents of the memory at the start of the sample waveforms is assumed to be ( F0, F1, F2, F3, ...). The design rom.v has one read port. The read port has 2048 words of 8 bits each. The output of the read port is registered by clock. </P>
<CENTER><img src=rom_wave0.jpg> </CENTER>
<P><CENTER><FONT size=2>Fig. 1 : Wave showing read operation. </CENTER></P>
<P><FONT size=3>The above waveform shows the behavior of the design under normal read conditions. The read happens at the rising edge of the enabled clock cycle. The output from the RAM is undefined until after the first rising edge of the read clock. The clock enable on the read side input registers are disabled. The clock enable on the output registers are disabled. </P>
<P></P>
</body>
</html>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -