lcd_1602.qsf

基于FPGA的LCD1602显示

# Copyright (C) 1991-2006 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic 
# functions, and any output files any of the foregoing 
# (including device programming or simulation files), and any 
# associated documentation or information are expressly subject 
# to the terms and conditions of the Altera Program License 
# Subscription Agreement, Altera MegaCore Function License 
# Agreement, or other applicable license agreement, including, 
# without limitation, that your use is for the sole purpose of 
# programming logic devices manufactured by Altera and sold by 
# Altera or its authorized distributors.  Please refer to the 
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		lcd_1602_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


set_global_assignment -name FAMILY "Cyclone II"
set_global_assignment -name DEVICE EP2C5Q208C8
set_global_assignment -name TOP_LEVEL_ENTITY lcd_1602
set_global_assignment -name ORIGINAL_QUARTUS_VERSION "5.1 SP2"
set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:19:07  OCTOBER 21, 2006"
set_global_assignment -name LAST_QUARTUS_VERSION 7.2
set_global_assignment -name BDF_FILE lcd_1602.bdf
set_global_assignment -name VERILOG_FILE lcd.v
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name VHDL_FILE char_ram.vhd
set_global_assignment -name VECTOR_WAVEFORM_FILE lcd_1602.vwf
set_global_assignment -name GLITCH_DETECTION OFF
set_global_assignment -name SIMULATOR_GENERATE_SIGNAL_ACTIVITY_FILE OFF
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 208
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name USE_CONFIGURATION_DEVICE ON
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE EPCS1
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "AS INPUT TRI-STATED"
set_global_assignment -name TCL_SCRIPT_FILE setup.tcl
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT OFF
set_location_assignment PIN_23 -to clk
set_location_assignment PIN_56 -to reset
set_location_assignment PIN_146 -to lcd_e
set_location_assignment PIN_149 -to lcd_rs
set_location_assignment PIN_147 -to lcd_rw
set_location_assignment PIN_145 -to lcd_data[0]
set_location_assignment PIN_144 -to lcd_data[1]
set_location_assignment PIN_143 -to lcd_data[2]
set_location_assignment PIN_142 -to lcd_data[3]
set_location_assignment PIN_141 -to lcd_data[4]
set_location_assignment PIN_139 -to lcd_data[5]
set_location_assignment PIN_138 -to lcd_data[6]
set_location_assignment PIN_137 -to lcd_data[7]
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
set_location_assignment PIN_163 -to lcd1602_e
set_location_assignment PIN_180 -to FLASH_DQ[0]
set_location_assignment PIN_179 -to FLASH_DQ[1]
set_location_assignment PIN_176 -to FLASH_DQ[2]
set_location_assignment PIN_175 -to FLASH_DQ[3]
set_location_assignment PIN_173 -to FLASH_DQ[4]
set_location_assignment PIN_171 -to FLASH_DQ[5]
set_location_assignment PIN_170 -to FLASH_DQ[6]
set_location_assignment PIN_169 -to FLASH_DQ[7]
set_location_assignment PIN_181 -to FLASH_ADDR0
set_location_assignment PIN_193 -to FLASH_ADDR1
set_location_assignment PIN_150 -to rtl8019_cs
set_location_assignment PIN_201 -to FLASH_CE
set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"