dwt2_ram.v

it is used to find traffic

//
// Verilog Module dwt_final_lib.dwt2_ram.arch_name
//
// Created:
//          by - VLSI4.UNKNOWN (VLSI04)
//          at - 14:41:53 04/26/2008
//
// using Mentor Graphics HDL Designer(TM) 2004.1b (Build 12)
//
`resetall
`timescale 1ns/10ps
module dwt2_ram(clk,reset,in,out,addr,r_w_en,enable);
    
    input clk,reset,enable;
    input [23:0] in;
    input [12:0] addr;
    input r_w_en;
    output [23:0] out;
    
    reg [23:0] out;
    
    reg [23:0] mem [8191:0];
      
    always@(posedge clk or negedge reset)
    begin
      if(!reset)
      begin
        out<=24'b0;
      end
      else
      begin
        if(enable==1'b1)
        begin
        if(r_w_en==1'b0)    //read at active low
         out<=mem[addr];
         else
         mem[addr]<=in;
        end
     end
     end
     // ### Please start your Verilog code here ###
  endmodule