check_id.bat

来自「spartan3adsp spi flash」· Batch 代码 · 共 46 行

cd .

echo off

REM AVNET IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" 
REM SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX 
REM DEVICES.  BY PROVIDING THIS DESIGN, CODE, OR INFORMATION
REM AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION
REM OR STANDARD, AVNET IS MAKING NO REPRESENTATION THAT THIS
REM IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
REM AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
REM FOR YOUR IMPLEMENTATION.  AVNET EXPRESSLY DISCLAIMS ANY
REM WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
REM IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
REM REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
REM INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
REM FOR A PARTICULAR PURPOSE.
REM     
REM (c) Copyright 2007 AVNET, Inc.
REM All rights reserved.

set spiPartName=qb25f640s33b

REM Use "-select_cable N" to select a cable to connect to. N can be one
REM     of the following (default to 3 if not specified):
REM        0 = Xilinx Platform Cable USB 2.0 at 24.000 MHz
REM        1 = Xilinx Platform Cable USB 2.0 at 12.000 MHz
REM        2 = Xilinx Platform Cable USB 2.0 at 6.000 MHz
REM        3 = Xilinx Platform Cable USB 2.0 at 3.000 MHz
REM        4 = Xilinx Platform Cable USB 2.0 at 1.500 MHz
REM        5 = Xilinx Platform Cable USB 2.0 at 0.750 MHz
REM        6 = Xilinx Parallel Cable IV at 5.000 MHz
REM        7 = Xilinx Parallel Cable IV at 2.500 MHz
REM        8 = Xilinx Parallel Cable IV at 0.600 MHz

REM For Platform Cable USB II and some I
xip -accept_notice -xopt 12 -spi_idcheckonly -select_cable 2

REM For some Platform Cable USB I
REM xip -accept_notice -spi_idcheckonly -select_cable 2

REM For Parallel Cable IV
REM xip -accept_notice -xopt 4 -spi_idcheckonly -select_cable 6

pause