iir_pipe.v

来自「《数字信号处理的FPGA实现》代码」· Verilog 代码 · 共 29 行

//*********************************************************
// IEEE STD 1364-1995 Verilog file: iir_pipe.v
// Author-EMAIL: [e-mail]
//*********************************************************
module iir_pipe (x_in, y_out, clk); //----> Interface

  parameter W = 14; // Bit width - 1
  input          clk;
  input  [W:0]  x_in;   // Input
  output [W:0]  y_out;  // Result

  reg [W:0] x, x3, sx;
  reg [W:0] y, y9;  
            
  always @(posedge clk)  // Infer FFs for input, output and
  begin                  // pipeline stages; 
    x   <= x_in;         // use non-blocking FF assignments
    x3  <= {x[W],x[W:1]} + {x[W],x[W],x[W:2]}; 
                              // i.e. x / 2 + x / 4 = x*3/4
    sx  <= x + x3; // Sum of x element i.e. output FIR part
    y9  <= {y[W],y[W:1]} + {{4{y[W]}},y[W:4]}; 
                            // i.e. y / 2 + y / 16 = y*9/16
    y   <= sx + y9;                       // Compute output
  end

  assign y_out = y ;   // Connect register y to output pins

endmodule