📄 data_read_controller_64bit.vhd
字号:
fifo_01_wr_addr_val <= fifo_01_wr_addr;
fifo_10_wr_addr_val <= fifo_10_wr_addr;
fifo_11_wr_addr_val <= fifo_11_wr_addr;
fifo_20_wr_addr_val <= fifo_20_wr_addr;
fifo_21_wr_addr_val <= fifo_21_wr_addr;
fifo_30_wr_addr_val <= fifo_30_wr_addr;
fifo_31_wr_addr_val <= fifo_31_wr_addr;
fifo_40_wr_addr_val <= fifo_40_wr_addr;
fifo_41_wr_addr_val <= fifo_41_wr_addr;
fifo_50_wr_addr_val <= fifo_50_wr_addr;
fifo_51_wr_addr_val <= fifo_51_wr_addr;
fifo_60_wr_addr_val <= fifo_60_wr_addr;
fifo_61_wr_addr_val <= fifo_61_wr_addr;
fifo_70_wr_addr_val <= fifo_70_wr_addr;
fifo_71_wr_addr_val <= fifo_71_wr_addr;
fifo_00_wr_en_val <= fifo_00_wr_en;
fifo_10_wr_en_val <= fifo_10_wr_en;
fifo_20_wr_en_val <= fifo_20_wr_en;
fifo_30_wr_en_val <= fifo_30_wr_en;
fifo_40_wr_en_val <= fifo_40_wr_en;
fifo_50_wr_en_val <= fifo_50_wr_en;
fifo_60_wr_en_val <= fifo_60_wr_en;
fifo_70_wr_en_val <= fifo_70_wr_en;
fifo_01_wr_en_val <= fifo_01_wr_en;
fifo_11_wr_en_val <= fifo_11_wr_en;
fifo_21_wr_en_val <= fifo_21_wr_en;
fifo_31_wr_en_val <= fifo_31_wr_en;
fifo_41_wr_en_val <= fifo_41_wr_en;
fifo_51_wr_en_val <= fifo_51_wr_en;
fifo_61_wr_en_val <= fifo_61_wr_en;
fifo_71_wr_en_val <= fifo_71_wr_en;
dqs0_delayed_col1_val <= dqs0_delayed_col1;
dqs1_delayed_col1_val <= dqs1_delayed_col1;
dqs2_delayed_col1_val <= dqs2_delayed_col1;
dqs3_delayed_col1_val <= dqs3_delayed_col1;
dqs4_delayed_col1_val <= dqs4_delayed_col1;
dqs5_delayed_col1_val <= dqs5_delayed_col1;
dqs6_delayed_col1_val <= dqs6_delayed_col1;
dqs7_delayed_col1_val <= dqs7_delayed_col1;
dqs0_delayed_col0_val <= dqs0_delayed_col0;
dqs1_delayed_col0_val <= dqs1_delayed_col0;
dqs2_delayed_col0_val <= dqs2_delayed_col0;
dqs3_delayed_col0_val <= dqs3_delayed_col0;
dqs4_delayed_col0_val <= dqs4_delayed_col0;
dqs5_delayed_col0_val <= dqs5_delayed_col0;
dqs6_delayed_col0_val <= dqs6_delayed_col0;
dqs7_delayed_col0_val <= dqs7_delayed_col0;
-- dqsx_delayed_col0 negated signals
dqs0_delayed_col0_n <= not dqs0_delayed_col0;
dqs1_delayed_col0_n <= not dqs1_delayed_col0;
dqs2_delayed_col0_n <= not dqs2_delayed_col0;
dqs3_delayed_col0_n <= not dqs3_delayed_col0;
dqs4_delayed_col0_n <= not dqs4_delayed_col0;
dqs5_delayed_col0_n <= not dqs5_delayed_col0;
dqs6_delayed_col0_n <= not dqs6_delayed_col0;
dqs7_delayed_col0_n <= not dqs7_delayed_col0;
-- dqsx_delayed_col1 negated signals
dqs0_delayed_col1_n <= not dqs0_delayed_col1;
dqs1_delayed_col1_n <= not dqs1_delayed_col1;
dqs2_delayed_col1_n <= not dqs2_delayed_col1;
dqs3_delayed_col1_n <= not dqs3_delayed_col1;
dqs4_delayed_col1_n <= not dqs4_delayed_col1;
dqs5_delayed_col1_n <= not dqs5_delayed_col1;
dqs6_delayed_col1_n <= not dqs6_delayed_col1;
dqs7_delayed_col1_n <= not dqs7_delayed_col1;
-- data_valid signal is derived from fifo_00 and fifo_01 empty signals only
-- FIFO WRITE POINTER DELAYED SIGNALS
-- To avoid meta-stability due to the domain crossing from ddr_dqs to clk90
process (clk90)
begin
if (rising_edge(clk90)) then
if (reset90_r = '1') then
fifo_00_wr_addr_d <= "0000";
fifo_01_wr_addr_d <= "0000";
else
fifo_00_wr_addr_d <= fifo_00_wr_addr;
fifo_01_wr_addr_d <= fifo_01_wr_addr;
end if;
end if;
end process;
-- FIFO WRITE POINTER DOUBLE DELAYED SIGNALS
process (clk90)
begin
if (rising_edge(clk90)) then
if (reset90_r = '1') then
fifo_00_wr_addr_2d <= "0000";
fifo_01_wr_addr_2d <= "0000";
else
fifo_00_wr_addr_2d <= fifo_00_wr_addr_d;
fifo_01_wr_addr_2d <= fifo_01_wr_addr_d;
end if;
end if;
end process;
process (clk90)
begin
if (rising_edge(clk90)) then
if (reset90_r = '1') then
fifo_00_wr_addr_3d <= "0000";
fifo_01_wr_addr_3d <= "0000";
else
fifo_00_wr_addr_3d <= fifo_00_wr_addr_2d;
fifo_01_wr_addr_3d <= fifo_01_wr_addr_2d;
end if;
end if;
end process;
-- user data valid output signal from data path.
fifo_00_empty <= '1' when (fifo0_rd_addr(3 downto 0) = fifo_00_wr_addr_3d(3 downto 0)) else '0';
fifo_01_empty <= '1' when (fifo1_rd_addr(3 downto 0) = fifo_01_wr_addr_3d(3 downto 0)) else '0';
read_valid_data_0_1 <= ( (not fifo_00_empty) and (not fifo_01_empty) );
read_valid_data_1_val <= (read_valid_data_0_1);
process(clk90)
begin
if clk90'event and clk90 = '1' then
if reset90_r = '1' then
u_data_val <= '0';
read_valid_data_r <= '0';
read_valid_data_r1 <= '0';
else
read_valid_data_r <= read_valid_data_0_1;
read_valid_data_r1 <= read_valid_data_r;
u_data_val <= read_valid_data_r1;
end if;
end if;
end process;
--- Assignments done by MURTHY
-- here vector component is assigned to a scalar signal
-- it was done because the delay_dqs signals were used
dqs0_delayed_col0 <= dqs_delayed_col0(0);
dqs1_delayed_col0 <= dqs_delayed_col0(1);
dqs2_delayed_col0 <= dqs_delayed_col0(2);
dqs3_delayed_col0 <= dqs_delayed_col0(3);
dqs4_delayed_col0 <= dqs_delayed_col0(4);
dqs5_delayed_col0 <= dqs_delayed_col0(5);
dqs6_delayed_col0 <= dqs_delayed_col0(6);
dqs7_delayed_col0 <= dqs_delayed_col0(7);
---- Added on JAN28 ----
dqs0_delayed_col1 <= dqs_delayed_col1(0);
dqs1_delayed_col1 <= dqs_delayed_col1(1);
dqs2_delayed_col1 <= dqs_delayed_col1(2);
dqs3_delayed_col1 <= dqs_delayed_col1(3);
dqs4_delayed_col1 <= dqs_delayed_col1(4);
dqs5_delayed_col1 <= dqs_delayed_col1(5);
dqs6_delayed_col1 <= dqs_delayed_col1(6);
dqs7_delayed_col1 <= dqs_delayed_col1(7);
-- dqsx_delayed_col0 negated signals
rst_dqs_div_delayed1 : dqs_delay port map (
clk_in => rst_dqs_div_in,
sel_in => delay_sel,
clk_out => rst_dqs_div
);
--------------------------------------------------------------------------------------------------------------------------------------------------
--**************************************************************************************************
-- DQS Internal Delay Circuit implemented in LUTs
--**************************************************************************************************
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay0_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in0,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(0)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay0_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in0,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(0)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay1_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in1,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(1)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay1_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in1,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(1)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay2_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in2,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(2)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay2_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in2,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(2)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay3_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in3,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(3)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay3_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in3,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(3)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay4_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in4,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(4)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay4_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in4,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(4)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay5_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in5,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(5)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay5_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in5,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(5)
);
-- Internal Clock Delay circuit placed in the first column (for falling edge data) adjacent to IOBs
dqs_delay6_col0 : dqs_delay port map (
clk_in => dqs_int_delay_in6,
sel_in => delay_sel,
clk_out => dqs_delayed_col0(6)
);
-- Internal Clock Delay circuit placed in the second column (for rising edge data) adjacent to IOBs
dqs_delay6_col1 : dqs_delay port map (
clk_in => dqs_int_delay_in6,
sel_in => delay_sel,
clk_out => dqs_delayed_col1(6)
);
-- Internal Clock Delay circuit placed in the firs333t column (for falling edge data) adjacent to IOBs
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -