readme

system C源码 一种替代verilog的语言

This is a source code distribution for QuickThreads.  QuickThreads is a
toolkit for building threads packages; it is described in detail in the
University of Washington CS&E Technical report #93-05-06, available via
anonymous ftp from `ftp.cs.washington.edu' (128.95.1.4, as of Oct. '94)
in `tr/1993/05/UW-CSE-93-05-06.PS.Z'.

This distribution shows basic ideas in QuickThreads and elaborates with
example implementations for a gaggle of machines.  As of October those
machines included:

	80386 faimly
	88000 faimily
	DEC AXP (Alpha) family
	HP-PA family
	KSR
	MIPS family
	SPARC V8 family
	VAX family

Configuration, build, and installation are described in INSTALL.

Be aware: that there is no varargs code for the KSR.

The HP-PA port was designed to work with both HP workstations
and Convex SPP computers. It was generously provided by Uwe Reder
<[e-mail]>. It is part of the ELiTE
(Erlangen Lightweight Thread Environment) project directed by 
Frank Bellosa <[e-mail]> at the Operating 
Systems Department of the University of Erlangen (Germany).

Other contributors include: Weihaw Chuang, Richard O'Keefe,
Laurent Perron, John Polstra, Shinji Suzuki, Assar Westerlund,
thanks also to Peter Buhr and Dirk Grunwald.


Here is a brief summary:

QuickThreads is a toolkit for building threads packages.  It is my hope
that you'll find it easier to use QuickThreads normally than to take it
and modify the raw cswap code to fit your application.  The idea behind
QuickThreads is that it should make it easy for you to write & retarget
threads packages.  If you want the routine `t_create' to create threads
and `t_block' to suspend threads, you write them using the QuickThreads
`primitive' operations `QT_SP', `QT_INIT', and `QT_BLOCK', that perform
machine-dependent initialization and blocking, plus code you supply for
performing the portable operatons.  For example, you might write:

	t_create (func, arg)
	{
	  stk = malloc (STKSIZE);
	  stackbase = QT_SP (stk, STKSIZE);
	  sp = QT_INIT (stakcbase, func, arg);
	  qput (runq, sp);
	}

Threads block by doing something like:

	t_block()
	{
	  sp_next = qget (runq);
	  QT_BLOCK (helper, runq, sp_next);
	  // wake up again here
	}

	// called by QT_BLOCK after the old thread has blocked,
	// puts the old thread on the queue `onq'.
	helper (sp_old, onq)
	{
	  qput (onq, sp_old);
	}

(Of course) it's actually a bit more complex than that, but the general
idea is that you write portable code to allocate stacks and enqueue and
dequeue threads.  Than, to get your threads package up and running on a
different machine, you just reconfigure QuickThreads and recompile, and
that's it.

The QuickThreads `distribution' includes a sample threads package (look
at stp.{c,h}) that is written in terms of QuickThreads operations.  The
TR mentioned above explains the simple threads package in detail.



If you do use QuickThreads, I'd like to hear both about what worked for
you and what didn't work, problems you had, insights gleaned, etc.

Let me know what you think.

David Keppel <[e-mail]>