count60.fit

出租车计费器,VHDL实现

-- MAX+plus II Compiler Fit File      
-- Version 9.3 7/23/1999              
-- Compiled: 05/25/2005 16:10:05      

-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "count60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 43     ;
    "clr"                          : INPUT_PIN  = 42     ;
    "start"                        : INPUT_PIN  = 84     ;
    "hor"                          : OUTPUT_PIN = 16     ;
    "min0"                         : OUTPUT_PIN = 18     ;
    "min1"                         : OUTPUT_PIN = 19     ;
    "min2"                         : OUTPUT_PIN = 17     ;
    "min3"                         : OUTPUT_PIN = 72     ;
    "min4"                         : OUTPUT_PIN = 71     ;
    "min5"                         : OUTPUT_PIN = 70     ;
    "|LPM_ADD_SUB:104|addcore:adder|:63" : LOCATION   = LC1_A2 ;
    "|LPM_ADD_SUB:104|addcore:adder|:67" : LOCATION   = LC2_A1 ;
    "|LPM_ADD_SUB:104|addcore:adder|:71" : LOCATION   = LC8_A1 ;
    "|LPM_ADD_SUB:104|addcore:adder|:75" : LOCATION   = LC7_A1 ;
    ":11"                          : LOCATION   = LC5_A1 ;  -- min_tmp5
    ":12"                          : LOCATION   = LC4_A1 ;  -- min_tmp4
    ":13"                          : LOCATION   = LC3_A1 ;  -- min_tmp3
    ":14"                          : LOCATION   = LC3_A3 ;  -- min_tmp2
    ":15"                          : LOCATION   = LC6_A2 ;  -- min_tmp1
    ":16"                          : LOCATION   = LC5_A2 ;  -- min_tmp0
    ":67"                          : LOCATION   = LC1_A1 ;
    "~67~1"                        : LOCATION   = LC6_A1 ;

END;

INTERNAL_INFO "count60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD5P43  : LORAX = "1:FB5->LC5_A1,->LC4_A1,->LC3_A1,->LC3_A3,->LC6_A2,->LC5_A2|";
    OD3P42  : LORAX = "1:FB3->LC5_A1,->LC4_A1,->LC3_A1,->LC3_A3,->LC6_A2,->LC5_A2|";
    LC1_A2  : LORAX = "1:MSW0R0C1,HHL23R0|2:PA11R0C0->LC2_A1,->LC8_A1,->LC7_A1,->LC1_A1|,2:PA11R0C2->LC3_A3||";
    OD0P84  : LORAX = "1:FB0|2:FH0R0|3:PA0R0C1->LC6_A2,->LC5_A2|,3:PA0R0C0->LC5_A1,->LC4_A1,->LC3_A1|,3:PA0R0C2->LC3_A3|||";
    LC5_A1  : LORAX = "1:MSW4R0C0,G50R0->OH4R0P70|";
    LC4_A1  : LORAX = "1:MSW3R0C0,G21R0->OH3R0P71|";
    LC3_A1  : LORAX = "1:MSW2R0C0,G17R0->OH2R0P72|";
    LC3_A3  : LORAX = "1:MSW2R0C3,HHL14R0->OH10R0P17,2:PA1R0C0->LC2_A1,->LC8_A1,->LC7_A1,->LC1_A1||";
    LC6_A2  : LORAX = "1:MSW6R0C0,HHL29R0->OH14R0P19|";
    LC5_A2  : LORAX = "1:MSW4R0C1,HHL36R0->OH12R0P18|";
    LC1_A1  : LORAX = "1:MSW0R0C0,HHL22R0->OH8R0P16|2:PA2R0C1->LC6_A2|,2:PA2R0C2->LC3_A3||";
	LC1_A2  : LORAX2 = "X, X, LC5_A2, LC6_A2";
	LC2_A1  : LORAX2 = "X, X, LC3_A3, LC1_A2";
	LC8_A1  : LORAX2 = "X, LC3_A3, LC3_A1, LC1_A2";
	LC7_A1  : LORAX2 = "LC3_A3, LC4_A1, LC3_A1, LC1_A2";
	LC5_A1  : LORAX2 = "OD0P84, LC7_A1, LC5_A1, LC1_A1";
	LC4_A1  : LORAX2 = "OD0P84, LC8_A1, LC4_A1, LC1_A1";
	LC3_A1  : LORAX2 = "OD0P84, LC2_A1, LC3_A1, LC1_A1";
	LC3_A3  : LORAX2 = "OD0P84, LC3_A3, LC1_A2, LC1_A1";
	LC6_A2  : LORAX2 = "OD0P84, LC6_A2, LC1_A1, LC5_A2";
	LC5_A2  : LORAX2 = "X, X, OD0P84, LC5_A2";
	LC6_A1  : LORAX2 = "X, LC5_A1, LC3_A1, LC4_A1";
	LC1_A1  : LORAX2 = "X, LC3_A3, LC6_A1, LC1_A2";
END;