gui_cb.m

这个是基于独立主成分分析的一个MATLAB语言程序

function gui_cb(action)
%
% This file is used by FASTICAG

% This file holds the callbacks to the main window

% @(#)$Id: gui_cb.m,v 1.5 2003/09/10 10:33:41 jarmo Exp $

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Global variables

% Handle to the main figure
global hf_FastICA_MAIN;

% Handles for needed controls in main figure;
global ht_FastICA_mixedStatus;
global ht_FastICA_dim;
global ht_FastICA_numOfSamp;
global ht_FastICA_newDim;
global ht_FastICA_whiteStatus;
global ht_FastICA_icaStatus;
global hpm_FastICA_approach;
global he_FastICA_numOfIC;
global hpm_FastICA_g;
global hpm_FastICA_stabilization;

% Main values are stored here
global g_FastICA_mixedsig;
global g_FastICA_mixedmean;
global g_FastICA_pca_D;
global g_FastICA_pca_E;
global g_FastICA_white_sig;
global g_FastICA_white_wm;
global g_FastICA_white_dwm;
global g_FastICA_ica_sig;
global g_FastICA_ica_A;
global g_FastICA_ica_W;
global g_FastICA_initGuess;
global g_FastICA_approach;
global g_FastICA_numOfIC;
global g_FastICA_g;
global g_FastICA_finetune;
global g_FastICA_a1;
global g_FastICA_a2;
global g_FastICA_myy;
global g_FastICA_stabilization;
global g_FastICA_epsilon;
global g_FastICA_maxNumIte;
global g_FastICA_maxFinetune;
global g_FastICA_sampleSize;
global g_FastICA_initState;
global g_FastICA_displayMo;
global g_FastICA_displayIn;
global g_FastICA_verbose;

% String values are here
global c_FastICA_appr_strV;
global c_FastICA_g1_strD;
global c_FastICA_g1_strV;
global c_FastICA_g2_strD;
global c_FastICA_g2_strV;
global c_FastICA_finetune_strD;
global c_FastICA_finetune_strV;
global c_FastICA_stabili_strV;
global c_FastICA_iSta_strV;
global c_FastICA_dMod_strV;
global c_FastICA_verb_strV;

% What is the load type of load dialog
global g_FastICA_loadType;

% Global variable for stopping the ICA calculations
global g_FastICA_interrupt;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% What ever we do, it will take some time... not much, but some :-)
watchonInFigure = watchon;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
switch action
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'InitAll'

 % If the data is already loaded, then get the information from data
 % and show to the user (also set g_FastICA_numOfIC)
 if ~isempty(g_FastICA_mixedsig)
   set(ht_FastICA_mixedStatus, 'String', '');
   [dim, numofsamp] = size(g_FastICA_mixedsig);
   set(ht_FastICA_dim, 'String', int2str(dim));
   set(ht_FastICA_numOfSamp, 'String', int2str(numofsamp));
   set(ht_FastICA_newDim, 'String', int2str(dim));
   set(he_FastICA_numOfIC, 'String', int2str(dim));
   g_FastICA_numOfIC = dim;
   g_FastICA_mixedmean = [];
 end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'LoadData'

 handle = findobj('Tag','f_FastICALoad');  % Check if the window is already
 if isempty(handle)                        % open. If not then open it.
   pos = get(hf_FastICA_MAIN, 'Position');
   % Based on the feedback obtained from some users, it seems
   % that at least in some systems, pos can sometimes be empty. A
   % similar check is done a few lines below.
   if ~isempty (pos),
     gui_l(pos(1), pos(2));
   else
     gui_l (0, 0);
   end
 else
   if strcmp(g_FastICA_loadType, 'data')   % Check if it was the same load
     figure(handle);                       % window. If it wasn't then
   else                                    % close the other window first
     close(handle);                        % and then open the load window
     fprintf('''Load initial guess'' -dialog closed!\n');
     pos = get(hf_FastICA_MAIN, 'Position');
     if ~isempty (pos),
       gui_l(pos(1), pos(2));
     else
       gui_l (0, 0);
     end
   end
 end
 
 % gui_cb NewData; - is called from the load function if not canceled...

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'NewData'

 % New data is loaded or the old data changed. We need to find out
 % somethings about the new data... and do some other stuff also...
 [dim, numofsamp] = size(g_FastICA_mixedsig);
 set(ht_FastICA_dim, 'String', dim);
 set(ht_FastICA_newDim, 'String', dim);
 set(ht_FastICA_numOfSamp, 'String', numofsamp);
 set(he_FastICA_numOfIC, 'String', int2str(dim));
 
 g_FastICA_numOfIC = dim;    % Default for numOfIC = the new dimension
			     % PCA needs to be calculated again.
 g_FastICA_pca_E = [];       % We use this to check if PCA is calculated
 gui_cb NullWhite;           % Whitening needs to be done again also
 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'NullWhite'

 % Whitening needs to done again next time it's needed
 g_FastICA_white_sig = [];   % We use this to check if whitening is calculated
 gui_cb NullICA;             % The FPICA must be calculated again

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'NullICA'

 % If IC's are needed they have to bee calculated again
 g_FastICA_ica_sig = [];     % We use this to check if FPICA is calculated
 set(ht_FastICA_icaStatus,'String','Not yet done');

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'Transpose'

 if isempty(g_FastICA_mixedmean)
   g_FastICA_mixedsig = g_FastICA_mixedsig';
 else
   g_FastICA_mixedsig = (g_FastICA_mixedsig + ...
			 g_FastICA_mixedmean * ...
			 ones(1,size(g_FastICA_mixedsig, 2)))';
   g_FastICA_mixedmean = [];
 end
 gui_cb NewData;             % Data has been changed


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'DoPCA'

 if ~isempty(g_FastICA_mixedsig)
   % We'll remove mean of the data here also just in case...
   if isempty(g_FastICA_mixedmean)
     [g_FastICA_mixedsig, g_FastICA_mixedmean] = remmean(g_FastICA_mixedsig);
   end
   
   % Do PCA interactively: ask the user for eigenvalues
   [g_FastICA_pca_E, g_FastICA_pca_D] = pcamat(g_FastICA_mixedsig, ...
					       0, 0, 'gui', ...
					       deblank(c_FastICA_verb_strV(g_FastICA_verbose,:)));
   
   newdim = size(g_FastICA_pca_D, 1);
   set(ht_FastICA_newDim, 'String', int2str(newdim));
   set(he_FastICA_numOfIC, 'String', int2str(newdim));
   g_FastICA_numOfIC = newdim;
   gui_cb NullWhite;           % Whitening needs to be done again also
			       % but we'll do it when it's needed.
 else
   fprintf('Data not loaded yet!\n\n');
 end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'OrigDim'

 gui_cb NewData;

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'ShowMixed'

 if ~isempty(g_FastICA_mixedsig)
   handle = findobj('Tag','f_FastICA_mix');  % Check if the window is already
   if isempty(handle)                        % open. If not then open it.
     figure('Tag', 'f_FastICA_mix', ...
	    'Name', 'FastICA: Plot data', ...
	    'NumberTitle', 'off');
   else
     figure(handle);
     clf;		% clear the figure for next plots
   end
   if isempty(g_FastICA_mixedmean)
     icaplot('dispsig',g_FastICA_mixedsig, 0, 0, 0, 'Mixed signals');
   else
     icaplot('dispsig',g_FastICA_mixedsig + g_FastICA_mixedmean * ...
	     ones(1, size(g_FastICA_mixedsig, 2)), 0, 0, 0, 'Mixed signals');
   end
 else
   fprintf('Data not loaded yet!\n\n');
 end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'ShowWhite'

 if ~isempty(g_FastICA_mixedsig)
   if isempty(g_FastICA_white_sig)     % if whitening is not done, we need to
     gui_cb Whiten;                    % do it before we can display the
   end                                 % whitened signals
   
   handle = findobj('Tag','f_FastICA_white');  % Check if the window is already
   if isempty(handle)                          % open. If not then open it.
     figure('Tag', 'f_FastICA_white', ...
	    'Name', 'FastICA: Plot whitened', ...
	    'NumberTitle', 'off');
   else
     figure(handle);
     clf;		% clear the figure for next plots
   end
   icaplot('dispsig',g_FastICA_white_sig,0,0,0,'Whitened signals');
 else
   fprintf('Data not loaded yet!\n\n');
 end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'Whiten'

 set(ht_FastICA_whiteStatus,'String','Computing...');
 
 % If PCA is not calculated, we'll have to calculate it now,
 % we'll do it without guestions - we don't reduce the dimension
 % here - but PCAMAT might reduce the dimension automatically.
 if isempty(g_FastICA_pca_E)
   % We'll remove mean of the data here also just in case...
   if isempty(g_FastICA_mixedmean)
     [g_FastICA_mixedsig, g_FastICA_mixedmean] = remmean(g_FastICA_mixedsig);
   end
   
   [g_FastICA_pca_E, g_FastICA_pca_D] = pcamat(g_FastICA_mixedsig, 1, ...
					       size(g_FastICA_mixedsig, ...
						    1), 'off', ...
					       deblank(c_FastICA_verb_strV(g_FastICA_verbose,:)));
   
   % Check if the dimension was reduced automatically
   newdim = size(g_FastICA_pca_D, 1);
   set(ht_FastICA_newDim, 'String', int2str(newdim));
   % Check if the numOfIC now has illegal value entered 
   % We do that by telling the program that there is new value 
   % entered for NumOfIC.
   gui_cb ChangeNumOfIC;
 end
 
 % And now we can calculate whitening...
 [g_FastICA_white_sig, g_FastICA_white_wm, g_FastICA_white_dwm] = ...
								  whitenv(g_FastICA_mixedsig, g_FastICA_pca_E, g_FastICA_pca_D, deblank(c_FastICA_verb_strV(g_FastICA_verbose,:)));
 
 set (ht_FastICA_whiteStatus,'String','');

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
case 'ChangeApproach'

 % Get the old value for g
 eval(['g_str = c_FastICA_g' int2str(g_FastICA_approach) '_strV;']);
 old_g = deblank(g_str(g_FastICA_g,:));
 
 % Get and set the new value for approach
 g_FastICA_approach = get(hpm_FastICA_approach, 'Value');
 
 % The possible values for g depend on the value of approach...
 eval(['g_str = c_FastICA_g' int2str(g_FastICA_approach) '_strD;']);